Difference between revisions of "Bentel"

From HSYCO
Jump to navigation Jump to search
(Created page with "Category:UI Objects")
 
Line 1: Line 1:
−
[[Category:UI Objects]]
+
The Bentel KYO320 is an advanced, multi-area security system integrated HSYCO.
 +
The KYO320 driver in HSYCO supports the integration of more than one KYO320 unit on the same HSYCO SERVER.
 +
The integration with HSYCO can be accomplished through the standard RS-232 port on the KYO320’s motherboard.
 +
 
 +
[[Category:I/O Server]]
 +
 
 +
== Communication ==
 +
 
 +
Employ a DE-9 (often called DB-9) female-female RS-232 crossed cable to connect the RS-232 KYO port to the serial port on HSYCO SERVER. The cable must follow this pinout diagram:
 +
 
 +
2 ↔ 3
 +
3 ↔ 2
 +
5 ↔ 5
 +
 
 +
RS-232 parameters:
 +
{| class="wikitable"
 +
| '''Baud rate'''
 +
| same as defined on the KYO320 (usually 9600, 38400 or 57600)
 +
|-
 +
| '''Data bits'''
 +
| 8
 +
|-
 +
| '''Stop bit'''
 +
| 1
 +
|-
 +
| '''Parity'''
 +
| even
 +
|-
 +
| '''Flow control'''
 +
| none
 +
|}
 +
 
 +
 
 +
== HSYCO Configuration ==
 +
 
 +
=== Options ===
 +
 
 +
{| class="wikitable"
 +
!ID
 +
!Default
 +
!Values
 +
!Description
 +
 
 +
|-
 +
 
 +
|rowspan="2"|gui
 +
|rowspan="2"|true
 +
|true
 +
|enable support for the UI object, UISET actions and USER commands
 +
|-
 +
|false
 +
|disable UI support
 +
 
 +
|-
 +
 
 +
|rowspan="2"|language
 +
|rowspan="2"|system language
 +
|en
 +
|-
 +
|it
 +
|rowspan="2"|language of log and display messages. Supported values are it and en
 +
 
 +
|-
 +
 
 +
|logsize
 +
|50
 +
|n ≥ 0
 +
|the number of log lines to display in the UI object
 +
 
 +
|-
 +
 
 +
|polltime
 +
|1000
 +
|n ≥ 0
 +
|the data polling interval, in milliseconds. Shorter time improve the response of the system, but increase the load on the CPU of both HSYCO and the KYO system
 +
 
 +
 
 +
 
 +
|}
 +
 
 +
=== bentel.ini ===
 +
 
 +
The bentel.ini file is an optional configuration file located in the main directory (same directory as hsyco.ini or hsyco.jar) and used to define zones and partitions names. If defined, these names will be used instead of the original numbers in the log files and the bentel GUI object.
 +
 
 +
The bentel.ini is automatically detected at start-up. Changes to this file become effective when the I/O Server is restarted.
 +
 
 +
For each zone or partition, enter a line formatted as:
 +
 
 +
<pre>
 +
<io_server_id>.zone.<n> = <name>
 +
<io_server_id>.area.<n> = <name>
 +
</pre>
 +
 
 +
For instance:
 +
 
 +
<pre>
 +
kyo.zone.1 = kitchen
 +
kyo.zone.2 = garage
 +
kyo.area.1 = basement
 +
kyo.area.2 = second floor
 +
</pre>
 +
 
 +
== Datapoints ==
 +
 
 +
{| class="wikitable"
 +
!ID
 +
!Value
 +
!R/W
 +
!Description
 +
 
 +
|-
 +
 
 +
|rowspan="2" |connection
 +
|online
 +
|R
 +
|connection established
 +
|-
 +
|offline
 +
|R
 +
|HSYCO can't connect to the panel
 +
 
 +
|-
 +
 
 +
 
 +
 
 +
 
 +
 
 +
== User Interface ==
 +
 
 +
=== Bentel Object ===
 +
 
 +
{{:Bentel_(UI Object)}}
 +
 
 +
 
 +
=== UISET Actions ===
 +
 
 +
{| class="wikitable"
 +
!ID
 +
!Attribute
 +
!colspan="2"|Set to
 +
|-
 +
|log
 +
|text
 +
|colspan="2"|latest security log lines (as many as specified by the 'logsize' option)
 +
|-
 +
|log0
 +
|text
 +
|colspan="2"|latest line of the security log when a new entry is added, set back to blank after a short period
 +
|-
 +
|c<n>.name
 +
|text
 +
|colspan="2"|name assigned to circuit <n> or its number if no name is defined
 +
|-
 +
|rowspan="2"|connection.label
 +
|rowspan="2"|visible
 +
|true
 +
|when datapoint connection = offline
 +
|-
 +
|false
 +
|when datapoint connection = online
 +
|-
 +
|rowspan="2"|<datapoint_id>.label.1
 +
|rowspan="2"|visible
 +
|true
 +
|when datapoint with ID <datapoint_id> has value '1'
 +
|-
 +
|false
 +
|when datapoint with ID <datapoint_id> has value '0'
 +
|-
 +
|rowspan="2"|<datapoint_id>.label.0
 +
|rowspan="2"|visible
 +
|true
 +
|when datapoint with ID <datapoint_id> has value '0'
 +
|-
 +
|false
 +
|when datapoint with ID <datapoint_id> has value '1'
 +
|}
 +
 
 +
=== USER Commands ===
 +
 
 +
{| class="wikitable"
 +
!Name
 +
!Param
 +
!Action
 +
 
 +
|-
 +
 
 +
|rowspan="2" |armed
 +
|0
 +
|disarm all groups
 +
|-
 +
|1
 +
|arm all groups
 +
 
 +
|-
 +
 
 +
|rowspan="2" |g<n>.armed
 +
|0
 +
|disarm group <n>
 +
|-
 +
|1
 +
|arm group <n>
 +
 
 +
|-
 +
 
 +
|rowspan="2" |c<n>.bypassed
 +
|0
 +
|unbypass zone <n>
 +
|-
 +
|1
 +
|bypass zone <n>
 +
 
 +
|-
 +
 
 +
|rowspan="2" |c<n>.isolated
 +
|0
 +
|un-isolate zone <n>
 +
|-
 +
|1
 +
|isolate zone <n>
 +
 
 +
|-
 +
 
 +
|rowspan="2" |c<n>.soaked
 +
|0
 +
|un-soak zone <n>
 +
|-
 +
|1
 +
|soak zone <n>
 +
 
 +
|-
 +
 
 +
|system
 +
|reset
 +
|reset alarms
 +
 
 +
|}

Revision as of 09:50, 23 December 2013

The Bentel KYO320 is an advanced, multi-area security system integrated HSYCO. The KYO320 driver in HSYCO supports the integration of more than one KYO320 unit on the same HSYCO SERVER. The integration with HSYCO can be accomplished through the standard RS-232 port on the KYO320’s motherboard.

Communication

Employ a DE-9 (often called DB-9) female-female RS-232 crossed cable to connect the RS-232 KYO port to the serial port on HSYCO SERVER. The cable must follow this pinout diagram: 

2 ↔ 3
3 ↔ 2
5 ↔ 5

RS-232 parameters:

Baud rate same as defined on the KYO320 (usually 9600, 38400 or 57600)
Data bits 8
Stop bit 1
Parity even
Flow control none


HSYCO Configuration

Options

ID Default Values Description
gui true true enable support for the UI object, UISET actions and USER commands
false disable UI support
language system language en
it language of log and display messages. Supported values are it and en
logsize 50 n ≥ 0 the number of log lines to display in the UI object
polltime 1000 n ≥ 0 the data polling interval, in milliseconds. Shorter time improve the response of the system, but increase the load on the CPU of both HSYCO and the KYO system


bentel.ini

The bentel.ini file is an optional configuration file located in the main directory (same directory as hsyco.ini or hsyco.jar) and used to define zones and partitions names. If defined, these names will be used instead of the original numbers in the log files and the bentel GUI object.

The bentel.ini is automatically detected at start-up. Changes to this file become effective when the I/O Server is restarted.

For each zone or partition, enter a line formatted as: 

<io_server_id>.zone.<n> = <name>
<io_server_id>.area.<n> = <name>

For instance: 

kyo.zone.1 = kitchen
kyo.zone.2 = garage
kyo.area.1 = basement
kyo.area.2 = second floor

Datapoints

User Interface

Bentel Object

The user interface for the Bentel KYO320 multi-area intrusion detection system:

UI Object bentel1.png UI Object bentel2.png UI Object bentel3.png UI Object bentel4.png

The Bentel object is listed in the Project Editor’s new object list only when at least one Bentel I/O Server is defined.

Parameters

  • server id: the server ID
  • position: the object's position. Use the pixels or rows and columns coordinates format

Syntax

(bentel <server id>; <position>)

E.g. 

(bentel serverid; x10y20)


UISET Actions

ID Value R/W Description
connection online R connection established
offline R HSYCO can't connect to the panel
ID Attribute Set to
log text latest security log lines (as many as specified by the 'logsize' option)
log0 text latest line of the security log when a new entry is added, set back to blank after a short period
c<n>.name text name assigned to circuit <n> or its number if no name is defined
connection.label visible true when datapoint connection = offline
false when datapoint connection = online
<datapoint_id>.label.1 visible true when datapoint with ID <datapoint_id> has value '1'
false when datapoint with ID <datapoint_id> has value '0'
<datapoint_id>.label.0 visible true when datapoint with ID <datapoint_id> has value '0'
false when datapoint with ID <datapoint_id> has value '1'

USER Commands

Name Param Action
armed 0 disarm all groups
1 arm all groups
g<n>.armed 0 disarm group <n>
1 arm group <n>
c<n>.bypassed 0 unbypass zone <n>
1 bypass zone <n>
c<n>.isolated 0 un-isolate zone <n>
1 isolate zone <n>
c<n>.soaked 0 un-soak zone <n>
1 soak zone <n>
system reset reset alarms
Retrieved from "http://wiki.hsyco.com/3.3.0/index.php?title=Bentel&oldid=397"