Difference between revisions of "Nuvo"
(Created page with "NuVo Grand Concerto and Essentia E6G are multi-source, multi-zone audio distribution systems that may be integrated to work with external control systems and servers. The cent...") |
|||
| Line 88: | Line 88: | ||
=== Nuvo Object === | === Nuvo Object === | ||
| − | |||
| − | |||
{{:Nuvo_(UI Object)}} | {{:Nuvo_(UI Object)}} | ||
| + | {{:NuvoMini_(UI Object)}} | ||
=== UISET Actions === | === UISET Actions === | ||
Revision as of 08:47, 29 April 2014
NuVo Grand Concerto and Essentia E6G are multi-source, multi-zone audio distribution systems that may be integrated to work with external control systems and servers. The central unit is called Main Processor Unit (MPU).
It provides power supply, source audio routing to the zones, amplified stereo audio output for each zone and centralized control and interface for all zones.
Contents
Communication
Employ a DE-9 (often called DB-9) male-female RS-232 straight cable to connect the RS-232 MPU port to the serial port on HSYCO SERVER.
You can also define and connect to more than one NUVO MPU to control multiple systems.
RS-232 parameters:
| Baud rate | 57600 |
| Data bits | 8 |
| Stop bit | 1 |
| Parity | none |
| Flow control | none |
Nuvo Configuration
On the NUVO device, a number of contiguous sources starting from the source 1 must be configured.
One of the areas 17 to 20 must be reserved for communication with HSYCO.
HSYCO Configuration
Add a Nuvo I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- Comm ID: select the comm port connected to the panel.
High Availability
- Shutdown when inactive: defaults to true.
Options
| ID | Default | Values | Description |
|---|---|---|---|
| gui | true | true | enable support for the UI object, UISET actions and USER commands |
| false | disable UI support | ||
| menuzone | 20 | 17 - 20 | defines which virtual zone will be used to access the menu system |
| menulines | 10 | the number of menu item lines |
Datapoints
| ID | Value | R/W | Description |
|---|
User Interface
Nuvo Object
The user interface for the Nuvo multi-room system:
The Nuvo object is listed in the Project Editor’s new object list only when at least one Nuvo I/O Server is defined.
Parameters
- server id: the server ID
- zone number: zone number of the Nuvo multi-room system
- position: the object's position. Use the pixels or rows and columns coordinates format
Syntax
(nuvo <server id>; <zone number>; <position>)
E.g.
(nuvo serverid; 1; x10y20)
The user interface for the Nuvo multi-room system:
The NuvoMini object is listed in the Project Editor’s new object list only when at least one Nuvo I/O Server is defined.
Parameters
- server id: the server ID
- zone number: zone number of the Nuvo multi-room system
- position: the object's position. Use the pixels or rows and columns coordinates format
Syntax
(nuvomini <server id>; <zone number>; <position>)
E.g.
(nuvomini serverid; 1; x10y20)
UISET Actions
USER Commands
The CSx75 I/O Server supports a few system commands to be inserted within the Web interface. The controls are directly supported as ordinary user objects, by setting the name and param fields according to the following table:
| ID | Attribute | Set to | |
|---|---|---|---|
| Name | Param | Action |
|---|
