Difference between revisions of "Yamaha RX-V"
Jump to navigation
Jump to search
| Line 10: | Line 10: | ||
== HSYCO Configuration == | == HSYCO Configuration == | ||
| + | Add a Yamaha I/O Server in the [[Settings#I/O Servers|I/O Servers section of the Settings]] and set its parameters: | ||
| + | |||
| + | === Communication === | ||
| + | *'''IP Address''': the IP address of the device. | ||
| + | |||
| + | === High Availability === | ||
| + | *'''Shutdown when inactive''': defaults to true. | ||
=== Options === | === Options === | ||
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 11:50, 25 March 2014
Yamaha RX-V1067, RX-V2067, and RX-V3067 are multi-source, multi-zone AV receiver/amplifier that may be integrated to work with external control systems and servers via ethernet connection.
Contents
Yamaha Configuration
In order to be able to control the device with HSYCO SERVER some initial configuration of the Yamaha device is needed.
Using the supplied remote control, go to the "home screen" and select the "setup" menu. From here, configure the network setting a fixed IP address compatible with the network the device is connected to. Further, make sure the option "network standby" is set to "on".
HSYCO Configuration
Add a Yamaha I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- IP Address: the IP address of the device.
High Availability
- Shutdown when inactive: defaults to true.
Options
| ID | Default | Values | Description |
|---|---|---|---|
| gui | true | true | enable support for UISET actions and USER commands |
| false | disable UI support | ||
| pollinterval | 1 | n > 0 | the data acquisition interval, in seconds |
Datapoints
For datapoints addressing a specific zone, replace <zone> with the name of the zone, i.e. use "main" for the main zone and "z2", "z3" or "z4" for the other zones (the number of zones depends on the Yamaha model).
| ID | Value | R/W | Description |
|---|---|---|---|
| connection | online | R | connection established |
| offline | R | HSYCO can't connect to the panel | |
| system.power | 1 | R | at least one zone is on |
| W | turn all zones on | ||
| 0 | R | all zones are off | |
| W | turn all zones off | ||
| system.party | 1 | R | party mode is on |
| W | set party mode on | ||
| 0 | R | party mode is off | |
| W | set party mode off | ||
| <zone>.power | 1 | R | zone <zone> is on |
| W | turn zone <zone> on | ||
| 0 | R | zone <zone> is off | |
| W | turn zone <zone> off | ||
| <zone>.sleep | off | R | the sleep time of this zone is set to off |
| W | set the sleep time of this zone to off | ||
| 30 | R | the sleep time of this zone is set to 30 minutes | |
| W | set the sleep time of this zone to 30 minutes | ||
| 60 | R | the sleep time of this zone is set to 60 minutes | |
| W | set the sleep time of this zone to 60 minutes | ||
| 90 | R | the sleep time of this zone is set to 90 minutes | |
| W | set the sleep time of this zone to 90 minutes | ||
| 120 | R | the sleep time of this zone is set to 120 minutes | |
| W | set the sleep time of this zone to 120 minutes | ||
| <zone>.source | <src>[Note 1] | R | the source for this zone is set to <src>[Note 1] |
| W | set the source for this zone to <src>[Note 1] | ||
| <zone>.source.name | <name> | R | the current source on this zone is named <name> |
| <zone>.volume | off | R | this zone volume is muted |
| W | mute this zone | ||
| on | W | un-mute this zone | |
| 1% ... 100% | R | this zone's volume is set to the reported value | |
| W | set this zone's volume to the specified value (the '%' character can be omitted) | ||
| up | W | increase this zone's volume | |
| down | W | decrease this zone's volume | |
| <zone>.mute | 1 | R | this zone's volume is muted |
| W | mute this zone | ||
| 0 | R | this zone's volume is not muted | |
| W | un-mute this zone | ||
| main.surround | <prg>[Note 2] | R | the surround program is set to <prg>[Note 2] |
| W | set the surround program to <prg>[Note 2] | ||
| main.enhancer | 1 | R | the enhancer is on |
| W | set the enhancer on | ||
| 0 | R | the enhancer is off | |
| W | set the enhancer off |
- Note 1
- The main zone accepts the following parameters as sources: "av1", "av2", "av3", "av4", "av5", "av6", "av7", "tuner", "phono", "vaux", "multich", "ipod", "pc", "netradio", "usb", "audio1", "audio2", "audio3", "audio4". The other zones accept the following parameters as source: "av1", "av2", "av3", "av4", "tuner", "phono", "vaux", "ipod", "pc", "netradio", "usb", "audio1", "audio2", "audio3", "audio4".
- Note 2
- The following is the list of accepted surround programs for the main zone: "straight", "hallinmunich", "hallinvienna", "chamber", "cellarclub", "theroxytheatre", "thebottomline", "sports", "actiongame", "roleplayinggame", "musicvideo", "standard", "spectacle", "scifi", "adventure", "drama", "monomovie", "2chstereo", "7chstereo", "surrounddecoder".
User Interface
UISET Actions
| ID | Attribute | Set to | |
|---|---|---|---|
| connection | visible | true | when datapoint connection = offline |
| false | when datapoint connection = online | ||
| system.power | value | ON | when at least one zone is active |
| OFF | when all zones are off | ||
| system.party | value | ON | when party mode is on |
| OFF | when party mode is off | ||
| visible | true | when the device is on | |
| false | when the device is off | ||
USER Commands
Release Notes
3.0.0
- initial version release
Yamaha is a registered trademark of Yamaha Corporation
