Difference between revisions of "Kissbox"
Line 7: | Line 7: | ||
Check the KissBox site for additional information. | Check the KissBox site for additional information. | ||
+ | |||
Revision as of 14:20, 26 September 2014
KissBox DMX-512 is a Ethernet DMX adapter that allows HSYCO to control any DMX-512 standard bus.
Multiple Transceivers can be set up to work together and distribute up to 64 universes of DMX across the network. The DMX-512 Transceiver can be set to use the Artnet protocol.
Check the KissBox site for additional information.
Connections
The KissBox DMX-512 connects to an Ethernet port on HSYCO Server, and is powered through the Ethernet, so there is no need for an external power supply.
You can connect multiple KissBox DMX-512 devices or other DMX controllers to an HSYCO Server.
HSYCO Configuration
Add a DMX Gateway in the DMX Gateway section of the Settings and set its parameters:
Communication
- IP Address: IP address of the KissBox DMX-512
- IP Port: TCP/IP port to use.
Once the KissBox is configured in the DMX Gateway of System Settings, you will be able to control the DMX-512 bus as with any other supported DMX controller on HSYCO.
Release Notes
3.1.0
- initial release
KissBox DMX-512 is a registered trademark of Kissbox.