Difference between revisions of "WXT520"
Line 103: | Line 103: | ||
|sn | |sn | ||
− | |< | + | |<value> |
|R | |R | ||
|wind speed minimum (m/s, km/h, mph, knots) | |wind speed minimum (m/s, km/h, mph, knots) | ||
Line 109: | Line 109: | ||
|sm | |sm | ||
− | |< | + | |<value> |
|R | |R | ||
|wind speed average (m/s, km/h, mph, knots) | |wind speed average (m/s, km/h, mph, knots) | ||
Line 115: | Line 115: | ||
|sx | |sx | ||
− | |< | + | |<value> |
|R | |R | ||
|wind speed maximum (m/s, km/h, mph, knots) | |wind speed maximum (m/s, km/h, mph, knots) | ||
Line 121: | Line 121: | ||
|dn | |dn | ||
− | |< | + | |<value> |
|R | |R | ||
|wind direction minimum (deg) | |wind direction minimum (deg) | ||
Line 127: | Line 127: | ||
|dm | |dm | ||
− | |< | + | |<value> |
|R | |R | ||
|wind direction average (deg) | |wind direction average (deg) | ||
Line 133: | Line 133: | ||
|dx | |dx | ||
− | |< | + | |<value> |
|R | |R | ||
|wind direction maximum (deg) | |wind direction maximum (deg) | ||
Line 139: | Line 139: | ||
|pa | |pa | ||
− | |< | + | |<value> |
|R | |R | ||
|air pressure (hPa, Pa, bar, mmHg, inHg), converted to mean sea level pressure if the altitude option is set | |air pressure (hPa, Pa, bar, mmHg, inHg), converted to mean sea level pressure if the altitude option is set | ||
Line 145: | Line 145: | ||
|ta | |ta | ||
− | |< | + | |<value> |
|R | |R | ||
|air temperature (C, F) | |air temperature (C, F) | ||
Line 151: | Line 151: | ||
|tp | |tp | ||
− | |< | + | |<value> |
|R | |R | ||
|internal temperature (C, F) | |internal temperature (C, F) | ||
Line 157: | Line 157: | ||
|ua | |ua | ||
− | |< | + | |<value> |
|R | |R | ||
|relative humidity (%RH) | |relative humidity (%RH) | ||
Line 163: | Line 163: | ||
|rc | |rc | ||
− | |< | + | |<value> |
|R | |R | ||
|rain accumulation (mm, in) | |rain accumulation (mm, in) | ||
Line 169: | Line 169: | ||
|rd | |rd | ||
− | |< | + | |<value> |
|R | |R | ||
|rain duration (s) | |rain duration (s) | ||
Line 175: | Line 175: | ||
|ri | |ri | ||
− | |< | + | |<value> |
|R | |R | ||
|rain intensity (mm/h, in/h) | |rain intensity (mm/h, in/h) | ||
Line 181: | Line 181: | ||
|rp | |rp | ||
− | |< | + | |<value> |
|R | |R | ||
|rain peak intensity (mm/h, in/h) | |rain peak intensity (mm/h, in/h) | ||
Line 187: | Line 187: | ||
|hc | |hc | ||
− | |< | + | |<value> |
|R | |R | ||
|hail accumulation (hits/cm2, hits/in2, hits) | |hail accumulation (hits/cm2, hits/in2, hits) | ||
Line 193: | Line 193: | ||
|hd | |hd | ||
− | |< | + | |<value> |
|R | |R | ||
|hail duration (s) | |hail duration (s) | ||
Line 199: | Line 199: | ||
|hi | |hi | ||
− | |< | + | |<value> |
|R | |R | ||
|hail intensity (hits/cm2h, hits/in2h, hits/ h) | |hail intensity (hits/cm2h, hits/in2h, hits/ h) | ||
Line 205: | Line 205: | ||
|hp | |hp | ||
− | |< | + | |<value> |
|R | |R | ||
|hail peak intensity (hits/cm2h, hits/in2h, hits/ h) | |hail peak intensity (hits/cm2h, hits/in2h, hits/ h) | ||
Line 211: | Line 211: | ||
|th | |th | ||
− | |< | + | |<value> |
|R | |R | ||
|heating temperature (C, F) | |heating temperature (C, F) | ||
Line 217: | Line 217: | ||
|vh | |vh | ||
− | |< | + | |<value> |
|R | |R | ||
|heating voltage (V) | |heating voltage (V) | ||
Line 223: | Line 223: | ||
|vs | |vs | ||
− | |< | + | |<value> |
|R | |R | ||
|supply voltage (V) | |supply voltage (V) | ||
Line 229: | Line 229: | ||
|vr | |vr | ||
− | |< | + | |<value> |
|R | |R | ||
|3.5 V ref. voltage (V) | |3.5 V ref. voltage (V) | ||
Line 235: | Line 235: | ||
|id | |id | ||
− | |< | + | |<value> |
|R | |R | ||
|information field | |information field |
Revision as of 17:30, 6 November 2014
The Vaisala WXT520 is a small and lightweight transmitter that offers six weather parameters in one compact package. WXT520 measures wind speed and direction, precipitation, atmospheric pressure, temperature and relative humidity.
The HSYCO WXT520 driver supports the RS-232 and RS-485 serial interface version, with the ASCII automatic protocol on the WXT520.
Contents
Communication
Connectthe WXT520 to HSYCO through a direct serial connection or a supporter TCP/IP to serial gateway.
The default RS-232 parameters are:
Baud rate | 19200 |
Data bits | 8 |
Stop bit | 1 |
Parity | none |
Flow control | none |
WXT520 configuration
The WXT520 must be configured to automatically send all relevant measured data to the serial port using its proprietary ASCII protocol.
Select the ASCII protocol and uncheck the "Polling only" option, so that automatic transmission is enabled. If the "Response with CRC" option is enabled, the WXT520 driver will check the CRC in received messages and discard messages with CRC errors.
The composite message transmission interval should be set to no more than 30 seconds, otherwise the driver could be occasionally restarted due to the intervention of the keep-alive watch-dog.
HSYCO Configuration
Add a WXT520 I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- Comm ID: select the comm port connected to the device.
High Availability
- Shutdown when inactive: defaults to true.
Options
ID | Default | Values | Description |
---|---|---|---|
gui | false | true | enable support for the UISET actions |
false | disable UI support | ||
altitude | 0 | integer number | the station's installation altitude above mean sea level.
This optional parameter is used to convert the measured local atmospheric pressure to mean sea level pressure (MSLP). The conversion function takes into account the altitude and local temperature. If this paramter is not set or set to 0, the measured pressure value will be returned unmodified. |
Datapoints
All measured values returned as datapoints use the units as set in the WXT520. The unit is not returned in the datapoint value.
ID | Value | R/W | Description |
---|---|---|---|
status | online | R | connection established |
offline | R | HSYCO can’t connect to the WXT520 | |
sn | <value> | R | wind speed minimum (m/s, km/h, mph, knots) |
sm | <value> | R | wind speed average (m/s, km/h, mph, knots) |
sx | <value> | R | wind speed maximum (m/s, km/h, mph, knots) |
dn | <value> | R | wind direction minimum (deg) |
dm | <value> | R | wind direction average (deg) |
dx | <value> | R | wind direction maximum (deg) |
pa | <value> | R | air pressure (hPa, Pa, bar, mmHg, inHg), converted to mean sea level pressure if the altitude option is set |
ta | <value> | R | air temperature (C, F) |
tp | <value> | R | internal temperature (C, F) |
ua | <value> | R | relative humidity (%RH) |
rc | <value> | R | rain accumulation (mm, in) |
rd | <value> | R | rain duration (s) |
ri | <value> | R | rain intensity (mm/h, in/h) |
rp | <value> | R | rain peak intensity (mm/h, in/h) |
hc | <value> | R | hail accumulation (hits/cm2, hits/in2, hits) |
hd | <value> | R | hail duration (s) |
hi | <value> | R | hail intensity (hits/cm2h, hits/in2h, hits/ h) |
hp | <value> | R | hail peak intensity (hits/cm2h, hits/in2h, hits/ h) |
th | <value> | R | heating temperature (C, F) |
vh | <value> | R | heating voltage (V) |
vs | <value> | R | supply voltage (V) |
vr | <value> | R | 3.5 V ref. voltage (V) |
id | <value> | R | information field |
UISET Actions
ID | Attribute | Set to | |
---|---|---|---|
sn | <value> <unit> | wind speed minimum (m/s, km/h, mph, knots) | |
sm | <value> <unit> | wind speed average (m/s, km/h, mph, knots) | |
sx | <value> <unit> | wind speed maximum (m/s, km/h, mph, knots) | |
dn | <value> <unit> | wind direction minimum (deg) | |
dm | <value> <unit> | wind direction average (deg) | |
dn | <value> <unit> | wind direction minimum (deg) | |
dx | <value> <unit> | wind direction maximum (deg) | |
pa | <value> <unit> | air pressure (hPa, Pa, bar, mmHg, inHg), converted to mean sea level pressure if the altitude option is set | |
ta | <value> <unit> | air temperature (C, F) | |
tp | <value> <unit> | internal temperature (C, F) | |
ua | <value> <unit> | relative humidity (%RH) | |
rc | <value> <unit> | rain accumulation (mm, in) | |
rd | <value> <unit> | rain duration (s) | |
ri | <value> <unit> | rain intensity (mm/h, in/h) | |
rp | <value> <unit> | rain peak intensity (mm/h, in/h) | |
hc | <value> <unit> | hail accumulation (hits/cm2, hits/in2, hits) | |
hd | <value> <unit> | hail duration (s) | |
hi | <value> <unit> | hail intensity (hits/cm2h, hits/in2h, hits/ h) | |
hp | <value> <unit> | hail peak intensity (hits/cm2h, hits/in2h, hits/ h) | |
th | <value> <unit> | heating temperature (C, F) | |
vh | <value> <unit> | heating voltage (V) | |
vs | <value> <unit> | supply voltage (V) | |
vr | <value> <unit> | 3.5 V ref. voltage (V) | |
id | <value> <unit> | information field |
Release Notes
3.4.0
- initial version release
Vaisala is a registered trademarks of Vaisala Oyj.