Difference between revisions of "JavaScript Callback Functions API"

Latest revision as of 14:27, 8 July 2015

System Functions

DaylightEvent

DaylightEvent(day)

Called at sunrise and sunset, according to the latitude and longitude values set in hsyco.ini, and the optional SunriseOffsetMinutes and SunsetOffsetMinutes parameters.

Parameters:

day: boolean - true at sunrise, false at sunset.

haActiveEvent

haActiveEvent(active)

Triggered by the change of state of an HSYCO server in a master/slave high availability configuration.

Parameters:

active: boolean - true if the server is active, false if not active.

PowerEvent

PowerEvent(power)

Triggered by a change of the current power load level, as set using the powerSet() Java API or the POWER action.

Thanks to this function, you can alter the power value shown in the Web interface, for example to aggregate power readings acquired from other sensors.

Parameters:

power: numeric - the power level, in Watts.

Returns:

numeric - if PowerEvent() returns -1 or doesn't return a value, HSYCO status is updated with the detected power value, the value returned by PowerEvent() is otherwise used.

The JavaScript PowerEvent function is always called, but its return value is used only when the Java PowerEvent callback is not defined or returned -1.

programTimerEvent

programTimerEvent(name)

Called when a program timer is activated.

Program timers are set using programTimerSet(), programTimerReset(), programTimerRepeat(), or using the corresponding actions in EVENTS.

Parameters:

name: string - program timer name.

SchedulerEvent

SchedulerEvent(groupname, schedulename)

This callback blocking function allows to call user methods at configurable intervals.

You define schedules using a group name and a schedule name.

Schedules under the same group run in the same thread and are executed sequentially, based on their interval in milliseconds. Schedules in different groups run in parallel.

Parameters:

groupname: string - the scheduler’s group name
schedulename: string - the scheduler’s name.

StartupEvent

StartupEvent()

Called only once when HSYCO starts, after the initialization and HTTP server start-up, but before the execution of the different field interface threads. It is not executed in a thread, it is therefore a blocking method, that must complete its execution before all other HSYCO services can be started.

SunPositionEvent

SunPositionEvent(azimuth, elevation)

Called when the Sun changes its height with respect to the horizon or its angle from true north.

Parameters:

azimuth: numeric - the current Sun angle from true north, in decimal degrees
elevation: numeric - the current Sun elevation in decimal degrees from the horizon. Elevation is negative at night.

TimeEvent

TimeEvent(time)

Called every 60 seconds.

HSYCO tries to synchronize the execution at the beginning of the minute, executing this method at seconds 0 of every minute.

However, the execution is not guaranteed. In case of heavy load HSYCO might not be able to execute the call with accurate timing. In extreme cases, it could occasionally skip some calls.

Parameters:

time: numeric - the current time in milliseconds.

varEvent

varEvent(name, value)

Triggered by the change of value of a program variable.

Parameters:

name: string - the variable name. Names are case-insensitive
value: string - the value to be assigned to the program variable.

Cameras

CameraCommandEvent

CameraCommandEvent(function, action, camera)

Triggered by a camera control input from the Web interface.

It can be used to execute arbitrary actions when the user clicks on the active areas of the camera view, or to replace some or all of the standard PTZ commands with custom actions.

Parameters:

function: string - see the table below
action: string - see the table below
camera: string - the camera name.

Returns:

numeric - if CameraCommandEvent() returns -1 or doesn't return a value, the standard PTZ command associated to the PTZ driver is skipped, otherwise it is executed normally.

The JavaScript CameraCommandEvent function is always called, but its return value is used only when the Java CameraCommandEvent callback is not defined or returned -1.

icon	function	action
	focus	far
	focus	near
	zoom	tele
	zoom	wide
	move	left
	move	right
	move	up
	move	down
	move	stop

CameraMotionEvent

CameraMotionEvent(event, time)

Called when HSYCO starts recording video from a camera.

Recording starts when a camera notifies a recording request with the recording HTTP API call (the zone=id portion is optional):

http://192.168.0.50/x/camerarec?camera=name&zone=id

Recording can also be triggered by the CameraRecTrigger() Java method or JavaScript function, or the CAMERAREC or CAMERARECFULL actions in EVENTS.

Parameters:

event: string - the event identification string, either the camera name only or name:id if recording is triggered by a camerarec HTTP call with the optional zone=id parameter
time: numeric - the current time in milliseconds.

CameraViewEvent

CameraViewEvent(camera, active)

CameraViewEvent() is called on changes of the live view status of cameras.

When at least one web client is showing the live feed from a camera, the camera is marked as active.

When no live feed request is received for a several consecutive seconds, the camera is marked as not active.

Parameters:

camera: string - the camera name
active: boolean - true if active, false if not.

DMX

DmxEvent

DmxEvent(channel, state)

Called after changes to DMX-512 channels.

Parameters:

channel: numeric - DMX channel address, from 1 to 512 which might be preceded by the DMX gateway number, starting from 0
state: numeric - the new channel value, from 0 to 255.

DmxFilter

DmxFilter(channel, state, reverse)

This function allows to filter the value of the status of each channel on the DMX-512 buses, sending to the gateway different values from those set in HSYCO.

This way, it is possible to apply chromatic corrections, or any on the fly translation of channels values.

This is a blocking function and is called when sending commands to the DMX gateway.

It is also called after reading current channels values from the gateway. In this case the conversion function should be symmetric and return a complementary value.

Parameters:

channel: numeric - the DMX channel address, from 1 to 512 which might be preceded by the DMX gateway number, starting from 0
state: numeric - the unfiltered value of the channel, from 0 to 255
reverse: boolean - false if called when writing to the gateway; true if called when reading from the gateway.

Returns:

numeric - the channel value that will be sent to the DMX gateway.

The JavaScript DmxFilter function is called only when the Java DmxFilter callback is not defined or returned the original value.

DmxStartupEvent

DmxStartupEvent(index)

Called when starting the monitor threads for each DMX bus, once per bus at the start of the execution of HSYCO, and also after every restart of the monitor thread, for example after communication errors.

It is safe, inside this function, to execute commands for the same DMX gateway.

This is a blocking function. The DMX driver will start after this function returns.

Parameters:

Index: numeric - number of the DMX bus, starting from 0.

Infrared Control

IREvent

IREvent(received, irtransid, event)

This function is called when an IRTrans receives or sends an IR command from its local IR database.

IRTrans can only receive and decode infrared commands that have been previously stored in its internal FLASH memory database.

Parameters:

received: boolean - true if the command has been received by the IRTrans, false if sent
irtransid: numeric - IRTrans number, starting from 0 for the first device, based on the listing order of the IRTrans parameter in hsyco.ini
event: string - the string of the command received or issued, formatted as: "remote_name,command".

I/O Servers

IOEvent

IOEvent(name, value)

Triggered by the value change of any data point of an I/O server.

Parameters:

id: string - the server id and the name of the data point. According to the type of server, the format changes but it generally appears as server name, as declared the ioServers parameter in hsyco.ini, followed by a specific name representing the data point within the system
value: string - the new value. For binary inputs or outputs, the returned values are “0” or “1”.

IOStartupEvent

IOStartupEvent(index)

Triggered by the start of the communication thread of each I/O server - once for each server at the beginning of the execution of HSYCO, and also after every reboot of the communication thread, for example after communication errors.

This is a blocking method. The I/O server driver will start after this function returns.

Parameters:

index: numeric - the I/O server number, starting from 0, based on the listing order of the ioServers parameter in hsyco.ini.

Modbus

For detailed information about the Modbus protocol, and the response PDU formats, you should refer to the MODBUS Application Protocol Specification V1.1b documentation at: http://www.modbus.org/docs/Modbus_Application_Protocol_V1_1b.pdf

ModbusEvent

ModbusEvent(name, addr, unitid, pdu)

Called by the Modbus Server I/O Server on every Modbus request received from a Modbus client.

The returned byte array is used as the Modbus response PDU (function code and data).

Parameters:

name: string - the name of the Modbus Server I/O server
addr: string - IP address of the Modbus client
unitid: numeric - the unit id set in the received Modbus request
pdu: string - the request PDU data, in hexadecimal string format.

Returns:

string - the response PDU data, in hexadecimal string format.

The JavaScript ModbusEvent function is called only when the Java ModbusEvent callback is not defined or returned a null value.

Network Services

httpCallEvent

httpCallEvent(address, secure, query)

Called when the HSYCO HTTP server receives a GET request with the following path:

/x/httpcall?query

The HTTP client's IP address must be in the trusted network range, or the httpcall request will be rejected, unless HTTPServerLowSecurityEnabled is true and the request is sent using HTTPS

This function shoud return a string, that will be sent as the text/plain answer to the HTTP client (with HTTP response code 200).

HSYCO will return a 404 Not Found response code if all of the following conditions are true:

no HTTP event matches the query in EVENTS
the httpCallEvent JavaScript callback is not defined in EVENTS, or doesn't return a value
the httpCallEvent Java callback is not defined in user.java or in any plugins, or returns null.

If the httpCallEvent is defined both in JavaScript and Java, the Java version return value (unless null) will be used in the HTTP response.

Parameters:

address: string - the IP address of the HTTP client
secure: boolean - true if the request is sent to the HTTPS server, false if the request is sent to the HTTP server
query: string - the string following the ? in the URL path.

Returns:

string - the string to send as the text/plain answer to the HTTP client.

LocationEvent

LocationEvent(mac, ip, zoneId)

Called, if the location service is active, when a variation in the association of a client to the Wi-Fi Access Points is detected.

Parameters:

mac: string - the MAC address of the client
ip: string - the IP address of the client, if available, or null (the IP address could be null if the associated device is not connected to the HSYCO Web interface)
zoneId: numeric - in case of association, it is the Access Point sequence number, according to the order defined in the LocationBases parameter in hsyco.ini; -1 if the client was de-associated from the Wi-Fi network.

SysLogEvent

 SysLogEvent(address, log)

Called when the HSYCO SYSLOG server receives a log message from a network client.

Note that this is a blocking call. The SYSLOG server will not process further messages until the last call has been processed.

Parameters:

address: string - the IP address of the SYSLOG client
log: string - SYSLOG log message.

PBX

PBXCallEvent

PBXCallEvent(host, caller, called)

Called when a call notification is sent to HSYCO by the PBX system.

If the method returns true, the request is recorded on the log file with the [OK] status, with [ERROR] otherwise.

The PBX should generate HTTP requests to the HSYCO Web Server, using the following formats:

http://192.168.0.50/x/vcall/<from>/<to>

or:

http://192.168.0.50/x/vcall?from=<from>&to=<to>

For example, the HTTP request:

http://192.168.0.50/x/vcall?from=21&to=25

is interpreted as a call notification from internal number 21 to number 25.

The HTTP client's IP address must be in the trusted network range, or the httpcall request will be rejected.

Parameters:

host: string - the IP address of the PBX server
caller: string - the caller number
called: string - the called number.

Returns:

boolean - return true to generate a log entry with [OK] status, false for [ERROR] status.

Squeezebox

SlimPowerEvent

SlimPowerEvent(index, power)

Called when a Squeezebox player is turned on or off.

Parameters:

index: numeric - player number, starting from 0 for the first player, based on the listing order of the slimPlayers parameter in hsyco.ini
power: numeric - 0: OFF, 1: ON.

SlimStatusEvent

SlimStatusEvent()

Called when a Squeezebox player changes its playback mode.

Parameters:

index: numeric - player number, starting from 0 for the first player, based on the listing order of the slimPlayers parameter in hsyco.ini
status: numeric - 0: OFF, 1: ON, 2: PAUSE, 3: PLAY, -1: UNKNOWN.

SlimVolumeEvent

SlimVolumeEvent(index, volume)

Called when a Squeezebox player changes its volume level.

Parameters:

index: numeric - player number, starting from 0 for the first player, based on the listing order of the slimPlayers parameter in hsyco.ini
volume: numeric - an integer number representing the volume change (not the absolute audio level) in a scale from 0 to 100; positive numbers correspond to a volume increase, negative numbers to a decrease.

Timers and Schedulers

UserTimerEvent

UserTimerEvent(name, active)

Called when a user timer or scheduler’s rule should be activated, and before executing the associated action in EVENTS.

It is also executed at the timer or scheduler’s rule deactivation.

This method must return a true value in order to make the timer or rule actually active and the associated actions executed.

Whenever the method returns false, the timer will not be activated, and the method will be called again once a minute for the scheduled duration of the timer.

In the same way, if the method returns false when the timer or rule is deactivated, the timer or rule will not be deactivated, extending the timer activation beyond the scheduled duration.

This is a blocking method.

Parameters:

name: string - timer name or scheduler’s rule name
active: boolean - true when activating and false when deactivating the timer or scheduler’s rule.

Returns:

boolean - true to confirm the timer event, false to block the event.

The JavaScript UserTimerEvent function is alway called, but its return value is used only when the Java UserTimerEvent callback is not defined or returned true.

User Interface

pageEvent

pageEvent(address, session, userid, project, page)

Called when a Web client initially loads a project and when navigating between pages.

There is no guarantee that the event would be fired the exact moment the page is loaded.

Network delays or errors could cause delayed triggering of this event.

Parameters:

address: string - the client’s IP address
session: string - session id string that uniquely identifies the client session
userid: string - the user id
project: string - project’s id
page: string - the page id, with the #landscape or #portrait suffix if the page has distinct orientation versions in the project.

uiClearEvent

uiClearEvent(session)

Called, following an explicit call of uiClear() or after the client session inactivity timeout expires, if the client session becomes active again (i.e. the client starts handshaking again with the server with the same session id).

Parameters:

session: string - session id string that uniquely identifies the client session.

userCommand

userCommand(session, userid, name, param)

Called by user clicks on buttons created in the Web interface with the user objects, by a USER action in EVENTS, or by the user() Java method and JavaScript function.

This function can optionally return a string. Any returned string causes the log of an [OK] status. If you want to prevent logging, for example to avoid sensitive information to be written in the log file, you should return the string “!”.

If you want to force the Web interface to show a specific page after the button is pressed (it would be like pressing a link object, return a string starting with “page:” followed by the page name; in this case, userCommand() will be called again when that popup or page is closed, with "/close" appended to param.

Parameters:

session: string - a session id string that uniquely identifies the client session
userid: string - the user id
name: string - the name field of the user object
param: string - the param of the user object

Returns:

string - log or go to page, see text above. If this function doesn't return a value, an [ERROR] status is logged in the log file, while any other string causes the log of an [OK] status.

The JavaScript userCommand function is alway called, but its return value is used only when the Java userCommand callback is not defined or returned null or an empty string.

userSubmit

userSubmit(session, userid, name, fields)

This function is similar to userCommand(session, userid, name, param).

When userSubmit() is defined, it will be called when a submit button is pressed, while userCommand() will continue to be called on user buttons.

userSubmit() provides a more convenient access to the values of multiple input fields in a form.

This function can optionally return a string. Any returned string causes the log of an [OK] status. If you want to prevent logging, for example to avoid sensitive information to be written in the log file, you should return the string “!”.

If you want to force the Web interface to show a specific page after the button is pressed (it would be like pressing a link object), return a string starting with “page:” followed by the page name; in this case, userCommand() will be called when that popup or page is closed, with "/close" appended to param.

Parameters:

session: string - a session id string that uniquely identifies the client session
userid: string - the user id
name: string - the id of the (submit!id) object
fields: array - the array of all input fields in the container where the (submit) object is located.

Returns:

string - log or go to page, see text above. If this function doesn't return a value, an [ERROR] status is logged in the log file, while any other string causes the log of an [OK] status.

The JavaScript userSubmit function is alway called, but its return value is used only when the Java userCommand or userSubmit callback are not defined or returned null or an empty string.

Examples:

The following code shows how to retrieve all field names and values of a submitted form.

function userSubmit(session, user, name, values) : {
	if (session.length > 0) {
		messageLog(user + ', ' + name + '=' + values);
		var keys = values.keySet().toArray();
		for (var i = 0; i < keys.length; i++) {
			messageLog(user + ', ' + keys[i] +  ' = ' + values.get(keys[i]));
		}
		return "";
	}
}

Create a project with a form and a few input fields in a container. Pressing the submit button should return something like this in the log file:

2014.01.31 13:54:32.034 - staff, submit1={keypad1=344, date1=20140131, input1=this is a text field} 
2014.01.31 13:54:32.038 - staff, keypad1 = 344 
2014.01.31 13:54:32.039 - staff, date1 = 20140131 
2014.01.31 13:54:32.042 - staff, input1 = this is a text field 
2014.01.31 13:54:32.043 - WEB USER COMMAND [submit1]: input1@this is a text field@date1@20140131@keypad1@344 [OK]

WebRootRequestEvent

WebRootRequestEvent(addr, secure, useragent)

This method is called when the Web server receives a root URL request. It can return a string to redirect the browser to a valid URL, or null to prevent redirection.

Parameters:

addr: string - the HTTP client’s address
secure: boolean - true if this is an HTTPS request
useragent: string - the Web browser’s user agent information.

Returns:

string - optional return string containing a valid absolute or relative URL

Examples:

The following code redirects any root HTTP request received by the HSYCO server to the manager page.

function WebRootRequestEvent(addr, secure, useragent) : {
	return "hsycoserver/manager";
}

@@ Line 1: / Line 1: @@
-= Callback Functions =
+[[Category:JavaScript]]
 == System Functions ==
 === DaylightEvent ===
- DaylightEvent(day)
+<source lang="java">DaylightEvent(day)</source>
 Called at sunrise and sunset, according to the latitude and longitude values set in hsyco.ini, and the optional SunriseOffsetMinutes and SunsetOffsetMinutes parameters.
@@ Line 12: / Line 11: @@
 '''Parameters:'''
 * day:  boolean - true at sunrise, false at sunset.
 === haActiveEvent ===
- haActiveEvent(active)
+<source lang="java">haActiveEvent(active)</source>
 Triggered by the change of state of an HSYCO server in a master/slave high availability configuration.
@@ Line 23: / Line 21: @@
 '''Parameters:'''
 * active:  boolean - true if the server is active, false if not active.
 === PowerEvent ===
- PowerEvent(power)
+<source lang="java">PowerEvent(power)</source>
 Triggered by a change of the current power load level, as set using the powerSet() Java API or the POWER action.
-Thanks to this method it is possible to alter the power value shown in the Web interface, for example to aggregate power readings acquired from other sensors.
+Thanks to this function, you can alter the power value shown in the Web interface, for example to aggregate power readings acquired from other sensors.
@@ Line 42: / Line 39: @@
 {{tip|The JavaScript PowerEvent function is always called, but its return value is used only when the Java PowerEvent callback is not defined or returned -1.}}
 === programTimerEvent ===
- programTimerEvent(name)
+<source lang="java">programTimerEvent(name)</source>
 Called when a program timer is activated.
-Program timers are set using programTimerSet(), programTimerReset(), programTimerRepeat(), or using the corresponding actions in the EVENTS.
+Program timers are set using [[Java_Command_and_Utility_Methods_API#programTimerSet|programTimerSet()]], [[Java_Command_and_Utility_Methods_API#programTimerReset|programTimerReset()]], [[Java_Command_and_Utility_Methods_API#programTimerRepeat|programTimerRepeat()]], or using the corresponding actions in EVENTS.
 '''Parameters:'''
 * name: string - program timer name.
 === SchedulerEvent ===
- SchedulerEvent(groupname, schedulename)
+<source lang="java">SchedulerEvent(groupname, schedulename)</source>
 This callback blocking function allows to call user methods at configurable intervals.
@@ Line 71: / Line 66: @@
 * groupname: string - the scheduler’s group name
 * schedulename: string - the scheduler’s name.
 === StartupEvent ===
- StartupEvent()
+<source lang="java">StartupEvent()</source>
 Called only once when HSYCO starts, after the initialization and HTTP server start-up, but before the execution of the different field interface threads. It is not executed in a thread, it is therefore a blocking method, that must complete its execution before all other HSYCO services can be started.
 === SunPositionEvent ===
- SunPositionEvent(azimuth, elevation)
+<source lang="java">SunPositionEvent(azimuth, elevation)</source>
 Called when the Sun changes its height with respect to the horizon or its angle from true north.
@@ Line 94: / Line 87: @@
 === TimeEvent ===
- TimeEvent(time)
+<source lang="java">TimeEvent(time)</source>
 Called every 60 seconds.
@@ Line 109: / Line 102: @@
 === varEvent ===
- varEvent(name, value)
+<source lang="java">varEvent(name, value)</source>
 Triggered by the change of value of a program variable.
@@ Line 122: / Line 115: @@
 === CameraCommandEvent ===
- CameraCommandEvent(function, action, camera)
+<source lang="java">CameraCommandEvent(function, action, camera)</source>
 Triggered by a camera control input from the Web interface.
@@ Line 146: / Line 139: @@
 === CameraMotionEvent ===
- CameraMotionEvent(event, time)
+<source lang="java">CameraMotionEvent(event, time)</source>
 Called when HSYCO starts recording video from a camera.
@@ Line 154: / Line 147: @@
   '''<nowiki>http://192.168.0.50/x/camerarec?camera=name&zone=id</nowiki>'''
-Recording can also be triggered by the CameraRecTrigger() Java call or the CAMERAREC or CAMERARECFULL actions in EVENTS.
+Recording can also be triggered by the CameraRecTrigger() Java method or JavaScript function, or the CAMERAREC or CAMERARECFULL actions in EVENTS.
@@ Line 161: / Line 154: @@
 * event: string - the event identification string, either the camera name only or name:id if recording is triggered by a camerarec HTTP call with the optional zone=id parameter
 * time: numeric - the current time in milliseconds.
 === CameraViewEvent ===
- CameraViewEvent(camera, active)
+<source lang="java">CameraViewEvent(camera, active)</source>
 CameraViewEvent() is called on changes of the live view status of cameras.
@@ Line 183: / Line 175: @@
 === DmxEvent ===
- DmxEvent(channel, state)
+<source lang="java">DmxEvent(channel, state)</source>
 Called after changes to DMX-512 channels.
@@ Line 196: / Line 188: @@
 === DmxFilter ===
- DmxFilter(channel, state, reverse)
+<source lang="java">DmxFilter(channel, state, reverse)</source>
 This function allows to filter the value of the status of each channel on the DMX-512 buses, sending to the gateway different values from those set in HSYCO.
@@ Line 223: / Line 215: @@
 === DmxStartupEvent ===
- DmxStartupEvent(index)
+<source lang="java">DmxStartupEvent(index)</source>
 Called when starting the monitor threads for each DMX bus, once per bus at the start of the execution of HSYCO, and also after every restart of the monitor thread, for example after communication errors.
-It is safe, inside this method, to execute command methods for the same DMX gateway.
+It is safe, inside this function, to execute commands for the same DMX gateway.
-{{tip|This is a blocking method. The DMX driver will start after this function returns.}}
+{{tip|This is a blocking function. The DMX driver will start after this function returns.}}
@@ Line 240: / Line 232: @@
 === IREvent ===
- IREvent(received, irtransid, event)
+<source lang="java">IREvent(received, irtransid, event)</source>
+This function is called when an IRTrans receives or sends an IR command from its local IR database.
-This method is called when an IRTrans receives or sends an IR command from its local IR database.
+{{tip|IRTrans can only receive and decode infrared commands that have been previously stored in its internal FLASH memory database.}}
 '''Parameters:'''
-* received: boolean - true if the command has been received21 by the IRTrans, false if sent
+* received: boolean - true if the command has been received by the IRTrans, false if sent
 * irtransid: numeric - IRTrans number, starting from 0 for the first device, based on the listing order of the IRTrans parameter in hsyco.ini
-* event: string - the string of the command received or issued, formatted as: "remote_name,command"
+* event: string - the string of the command received or issued, formatted as: "remote_name,command".
 == I/O Servers ==
@@ Line 256: / Line 249: @@
 === IOEvent ===
- IOEvent(name, value)
+<source lang="java">IOEvent(name, value)</source>
 Triggered by the value change of any data point of an I/O server.
@@ Line 269: / Line 262: @@
 === IOStartupEvent ===
- IOStartupEvent(index)
+<source lang="java">IOStartupEvent(index)</source>
 Triggered by the start of the communication thread of each I/O server - once for each server at the beginning of the execution of HSYCO, and also after every reboot of the communication thread, for example after communication errors.
@@ Line 282: / Line 275: @@
 == Modbus ==
+For detailed information about the Modbus protocol, and the response PDU formats, you should refer to the MODBUS Application Protocol Specification V1.1b documentation at: [http://www.modbus.org/docs/Modbus_Application_Protocol_V1_1b.pdf http://www.modbus.org/docs/Modbus_Application_Protocol_V1_1b.pdf]
 === ModbusEvent ===
- ModbusEvent(name, addr, unitid, pdu)
+<source lang="java">ModbusEvent(name, addr, unitid, pdu)</source>
 Called by the Modbus Server I/O Server on every Modbus request received from a Modbus client.
@@ Line 306: / Line 302: @@
 == Network Services ==
+=== httpCallEvent ===
+<source lang="java">httpCallEvent(address, secure, query)</source>
+Called when the HSYCO HTTP server receives a GET request with the following path:
+ /x/httpcall?query
+{{tip|The HTTP client's IP address must be in the trusted network range, or the httpcall request will be rejected, unless HTTPServerLowSecurityEnabled is true and the request is sent using HTTPS}}
+This function shoud return a string, that will be sent as the text/plain answer to the HTTP client (with HTTP response code 200).
+HSYCO will return a 404 Not Found response code if all of the following conditions are true:
+* no HTTP event matches the query in EVENTS
+* the httpCallEvent JavaScript callback is not defined in EVENTS, or doesn't return a value
+* the httpCallEvent Java callback is not defined in user.java or in any plugins, or returns null.
+If the httpCallEvent is defined both in JavaScript and Java, the Java version return value (unless null) will be used in the HTTP response.
+'''Parameters:'''
+* address: string - the IP address of the HTTP client
+* secure: boolean - true if the request is sent to the HTTPS server, false if the request is sent to the HTTP server
+* query: string - the string following the ? in the URL path.
+'''Returns:'''
+* string - the string to send as the text/plain answer to the HTTP client.
 === LocationEvent ===
- LocationEvent(mac, ip, zoneId)
+<source lang="java">LocationEvent(mac, ip, zoneId)</source>
-Called, if the location service is active, when a variation in the   association of a client to the Wi-Fi Access Points is detected.
+Called, if the location service is active, when a variation in the association of a client to the Wi-Fi Access Points is detected.
@@ Line 320: / Line 346: @@
 * zoneId: numeric - in case of association, it is the Access Point sequence number,  according to the order defined in the LocationBases parameter in hsyco.ini; -1 if the client was de-associated from the Wi-Fi network.
+=== SysLogEvent ===
+<source lang="java"> SysLogEvent(address, log)</source>
+Called when the HSYCO SYSLOG server receives a log message from a network client.
+Note that this is a blocking call. The SYSLOG server will not process further messages until the last call has been processed.
+'''Parameters:'''
+* address: string - the IP address of the SYSLOG client
+* log: string - SYSLOG log message.
 == PBX ==
@@ Line 325: / Line 364: @@
 === PBXCallEvent ===
- PBXCallEvent(host, caller, called)
+<source lang="java">PBXCallEvent(host, caller, called)</source>
 Called when a call notification is sent to HSYCO by the PBX system.
 If the method returns true, the request is recorded on the log file with the [OK] status, with [ERROR] otherwise.
+The PBX should generate HTTP requests to the HSYCO Web Server, using the following formats:
+ <nowiki>http://192.168.0.50/x/vcall/<from>/<to></nowiki>
+or:
+ <nowiki>http://192.168.0.50/x/vcall?from=<from>&to=<to></nowiki>
+For example, the HTTP request:
+ <nowiki>http://192.168.0.50/x/vcall?from=21&to=25</nowiki>
+is interpreted as a call notification from internal number 21 to number 25.
+{{tip|The HTTP client's IP address must be in the trusted network range, or the httpcall request will be rejected.}}
@@ Line 338: / Line 393: @@
 * called: string - the called number.
+'''Returns:'''
+* boolean - return true to generate a log entry with [OK] status, false for [ERROR] status.
 == Squeezebox ==
@@ Line 343: / Line 402: @@
 === SlimPowerEvent ===
- SlimPowerEvent(index, power)
+<source lang="java">SlimPowerEvent(index, power)</source>
 Called when a Squeezebox player is turned on or off.
@@ Line 351: / Line 410: @@
 * index: numeric - player number, starting from 0 for the first player, based on the listing order of the slimPlayers parameter in hsyco.ini
-* power - 0: OFF, 1: ON.
+* power: numeric - 0: OFF, 1: ON.
 === SlimStatusEvent ===
- SlimStatusEvent()
+<source lang="java">SlimStatusEvent()</source>
 Called when a Squeezebox player changes its playback mode.
@@ Line 369: / Line 427: @@
 === SlimVolumeEvent ===
- SlimVolumeEvent(index, volume)
+<source lang="java">SlimVolumeEvent(index, volume)</source>
 Called when a Squeezebox player changes its volume level.
@@ Line 384: / Line 442: @@
 === UserTimerEvent ===
- UserTimerEvent(name, active)
+<source lang="java">UserTimerEvent(name, active)</source>
 Called when a user timer or scheduler’s rule should be activated, and before executing the associated action in EVENTS.
@@ Line 417: / Line 475: @@
 === pageEvent ===
- pageEvent(address, session, userid, project, page)
+<source lang="java">pageEvent(address, session, userid, project, page)</source>
 Called when a Web client initially loads a project and when navigating between pages.
@@ Line 432: / Line 490: @@
 * userid: string - the user id
 * project: string - project’s id
-* page: string - the page id of the current page.
+* page: string -  the page id, with the #landscape or #portrait suffix if the page has distinct orientation versions in the project.
 === uiClearEvent ===
- uiClearEvent(session)
+<source lang="java">uiClearEvent(session)</source>
 Called, following an explicit call of uiClear() or after the client session inactivity timeout expires, if the client session becomes active again (i.e. the client starts handshaking again with the server with the same session id).
@@ Line 444: / Line 501: @@
 '''Parameters:'''
-* session: string - session id string that uniquely identifies the client session
+* session: string - session id string that uniquely identifies the client session.
 === userCommand ===
- userCommand(session, userid, name, param)
+<source lang="java">userCommand(session, userid, name, param)</source>
-Called by user clicks on buttons created in the Web interface with the (user), (usermini), (usermicro), (userrgb) or (userimage) objects, by a USER action in EVENTS, or by the userCommand() Java method.
+Called by user clicks on buttons created in the Web interface with the [[user|user objects]], by a USER action in EVENTS, or by the user() Java method and JavaScript function.
 This function can optionally return a string. Any returned string causes the log of an [OK] status. If you want to prevent logging, for example to avoid sensitive information to be written in the log file, you should return the string “!”.
-If you want to force the Web interface to show a specific page after the button is pressed (it would be like pressing a (link) object), return a string starting with “page:” followed by the page name; in this case, userCommand() will be called again when that popup or page is closed, with "/close" appended to param.
+If you want to force the Web interface to show a specific page after the button is pressed (it would be like pressing a [[link|link object]], return a string starting with “page:” followed by the page name; in this case, userCommand() will be called again when that popup or page is closed, with "/close" appended to param.
@@ Line 462: / Line 518: @@
 * session: string - a session id string that uniquely identifies the client session
 * userid: string - the user id
-* name: string - the name field of the (user) object
+* name: string - the name field of the [[user|user object]]
-* param: string - the param of the (user) object.
+* param: string - the param of the [[user|user object]]
@@ Line 471: / Line 527: @@
 {{tip|The JavaScript userCommand function is alway called, but its return value is used only when the Java userCommand callback is not defined or returned null or an empty string.}}
 === userSubmit ===
- userSubmit(session, userid, name, fields)
+<source lang="java">userSubmit(session, userid, name, fields)</source>
 This function is similar to userCommand(session, userid, name, param).
-When userSubmit() is defined, it will be called when a (submit!id), (submitmini!id) or (submitmicro!id) button is pressed, while userCommand() will continue to be called on (user) buttons.
+When userSubmit() is defined, it will be called when a [[submit|submit button]] is pressed, while userCommand() will continue to be called on [[user|user buttons]].
 userSubmit() provides a more convenient access to the values of multiple input fields in a form.
@@ Line 485: / Line 540: @@
 This function can optionally return a string. Any returned string causes the log of an [OK] status. If you want to prevent logging, for example to avoid sensitive information to be written in the log file, you should return the string “!”.
-If you want to force the Web interface to show a specific page after the button is pressed (it would be like pressing a (link) object), return a string starting with “page:” followed by the page name; in this case, userCommand() will be called when that popup or page is closed, with "/close" appended to param.
+If you want to force the Web interface to show a specific page after the button is pressed (it would be like pressing a [[link|link object]]), return a string starting with “page:” followed by the page name; in this case, userCommand() will be called when that popup or page is closed, with "/close" appended to param.
@@ Line 508: / Line 563: @@
 <syntaxhighlight lang="javascript">
- function userSubmit(session, user, name, values) : {
+function userSubmit(session, user, name, values) : {
- 	if (session.length > 0) {
+	if (session.length > 0) {
- 		messageLog(user + ', ' + name + '=' + values);
+		messageLog(user + ', ' + name + '=' + values);
- 		var keys = values.keySet().toArray();
+		var keys = values.keySet().toArray();
- 		for (var i = 0; i < keys.length; i++) {
+		for (var i = 0; i < keys.length; i++) {
- 			messageLog(user + ', ' + keys[i] +  ' = ' + values.get(keys[i]));
+			messageLog(user + ', ' + keys[i] +  ' = ' + values.get(keys[i]));
- 		}
+		}
- 		return "";
+		return "";
- 	}
+	}
- }
+}
 </syntaxhighlight>
@@ Line 530: / Line 585: @@
 === WebRootRequestEvent ===
- WebRootRequestEvent(addr, secure, useragent)
+<source lang="java">WebRootRequestEvent(addr, secure, useragent)</source>
 This method is called when the Web server receives a root URL request. It can return a string to redirect the browser to a valid URL, or null to prevent redirection.
@@ Line 552: / Line 607: @@
 <syntaxhighlight lang="javascript">
- function WebRootRequestEvent(addr, secure, useragent) : {
+function WebRootRequestEvent(addr, secure, useragent) : {
- 	return "hsycoserver/manager";
+	return "hsycoserver/manager";
- }
+}
-</syntaxhighlight>
-= Command and Utility Functions =
-== System Functions ==
-=== dateSet ===
- dateSet(year, month, day, hour, minute, second)
-Sets the HSYCO Server operating system’s clock and hardware clock, in the local time zone.
-'''Parameters:'''
-* year: numeric - the year, greater than 1900
-* month: numeric - the month, between 1-12
-* day: numeric - the day, between 1-31
-* hour: numeric - the hour, between 0-23
-* minute: numeric - the minute, between 0-59
-* second: numeric - the second, between 0-59.
-'''Returns:'''
-* boolean - true if successful, false if not
-=== getNextSunrise ===
- getNextSunrise(now, withoffset)
-Computes the time of the next sunrise after the time set in the now parameter.
-The sunrise time is returned in milliseconds since midnight, January 1, 1970 UTC.
-'''Parameters:'''
-* now: numeric - the reference time in milliseconds
-* withoffset: boolean - true to take the sunrise offset into account, as defined with the SunriseOffsetMinutes in hsyco.ini, false to ignore the offset and return the actual sunrise time (Based on civil dawn, begins when the geometric center of the sun is 6° below the horizon).
-'''Returns:'''
-* numeric - the next sunrise time in milliseconds since midnight, January 1, 1970 UTC.
-=== getNextSunset ===
- getNextSunset(now, withoffset)
-Computes the time of the next sunset after the time set in the now parameter.
-The sunset time is returned in milliseconds since midnight, January 1, 1970 UTC.
-'''Parameters:'''
-* now: numeric - the reference time in milliseconds
-* withoffset: boolean - true to take the sunset offset into account, as defined with the SunriseOffsetMinutes in hsyco.ini, false to ignore the offset and return the actual sunrise time (Based on civil dusk, ends when the geometric center of the sun reaches 6° below the horizon).
-'''Returns:'''
-* numeric - the next sunset time in milliseconds since midnight, January 1, 1970 UTC.
-=== haActiveState ===
- haActiveState()
-When HSYCO is installed in a high availability configuration, this method returns true if the system (master or slave) is active, false if it is not active.
-If high availability is not configured, the method returns true.
-'''Returns:'''
-* boolean - high availability current state.
-=== haActive ===
- haActive(active)
-Force a master HSYCO server to become inactive, or return to the active state.
-This method should be called on the master only, and has no effect on the slave server.
-'''Parameters:'''
-* active: boolean - set to true to force a master to become inactive, or false to return it to the active state after the master was forced to become inactive.
-=== isDaylight ===
- isDaylight()
-Returns the day or night status at present time.
-The result is based on the latitude and longitude data set in hsyco.ini and the SunriseOffsetMinutes and SunsetOffsetMinutes parameters.
-'''Returns:'''
-* boolean - true during the day, false at night.
-=== powerSet ===
- powerSet(power)
-Sets the electric power state variable.
-The power value is shown in the navigation or status bar of the Web interface.
-Besides setting the power value, this method also triggers the execution of the powerEvent() callback and the POWER event in EVENTS.
-'''Parameters:'''
-* power: numeric - the power in Watt units.
-=== programTimerClear ===
- programTimerClear(name)
-Cancels a program timer.
-'''Parameters:'''
-* name: string - the program timer name.
-=== programTimerRepeat ===
- programTimerRepeat(name, seconds)
-Sets a program timer that is executed repeatedly with an interval  equal to the specified number of seconds.
-If a program timer with the same name has already been set, the number of seconds to the timer’s execution is reset to the new value.
-'''Parameters:'''
-* name: string - the program timer name
-* seconds: numeric - the interval in seconds of the timer’s execution.
-=== programTimerReset ===
- programTimerReset(name, seconds)
-Sets a program timer to be executed after the specified number of seconds.
-If a program timer with the same name has already been set, the number of seconds to the timer’s execution is reset to the new value.
-'''Parameters:'''
-* name: string - the program timer name
-* seconds: numeric - the number of seconds to the timer’s execution.
-=== programTimerSet ===
- programTimerSet(name, seconds)
-Sets a program timer to be executed after the specified number of seconds.
-If a program timer with the same name has already been set, the action will be ignored.
-'''Parameters:'''
-* name: string - the program timer name
-* seconds: numeric - the number of seconds to the timer’s execution.
-=== schedulerRegister ===
- schedulerRegister(groupname, schedulename, interval)
-This function registers a new scheduled callback.
-'''Parameters:'''
-* groupname: string - the group name
-* schedulename: string - the schedule name
-* interval: numeric - interval in milliseconds.
-=== schedulerRemove ===
- schedulerRemove(groupname, schedulename)
-Deletes a schedule.
-'''Parameters:'''
-* groupname: string - the group name
-* schedulename: string - the schedule name.
-=== sleep ===
- sleep(millis)
-Causes the currently executing thread to sleep (temporarily cease execution) for the specified number of milliseconds.
-'''Parameters:'''
-* millis: numeric - the length of time to sleep in milliseconds.
-=== varGet ===
- varGet(name)
-Returns the value of a program variable, or null if no variable with the given name has been defined.
-Program variables can be set using varSet() in user.java or in the EVENTS programming environment.
-To access a variable used in EVENTS, the name used in varGet() should start with the $ character.
-Variables names ending with ! are considered persistent and their values are preserved when HSYCO restarts; normal variables are deleted when HSYCO starts.
-'''Parameters:'''
-* name: string - the variable name. Names are case-insensitive.
-'''Returns:'''
-* string - the current value of the program variable.
-=== varSet ===
- varSet(name, value)
-Sets a program variable to the value parameter.
-Variables set with varSet() can be read using varGet() and are also available in the EVENTS programming environment, if the variable name starts with $.
-If you need to use variables in Java or JavaScript but don’t want these variables to be available in EVENTS, just use names that don’t start with the $ character.
-Variables names ending with ! are considered persistent and their values are preserved when HSYCO restarts; normal variables are deleted when HSYCO starts.
-'''Parameters:'''
-* name: string - the variable name. Names are case-insensitive
-* value: string - the value to be assigned to the program variable.
-== Cameras ==
-=== cameraCommand ===
- cameraCommand(func, action, camera)
-Sends PTZ and focus commands to cameras.
-'''Parameters:'''
-* function: string - see the table below
-* action: string - see the table below
-* camera: string - the camera name.
-{{ui_camerapanel_ptz_table}}
-=== cameraMode ===
- cameraMode(cameraName, enabled)
-Disables or enables a camera.
-When the live view is disabled, recording is also disabled.
-'''Parameters:'''
-* camera: string - the camera name
-* enabled: boolean - true to enable the camera, false to disable.
-=== cameraRecMode ===
- cameraRecMode(cameraName, enabled)
-Disables or enables recording from a camera, not affecting live view.
-'''Parameters:'''
-* camera: string - the camera name
-* enabled: boolean - true to enable the recording, false to disable.
-=== cameraRecTrigger ===
- cameraRecTrigger(cameraName, source, seconds)
-Records video from a camera.
-'''Parameters:'''
-* camera: string - the camera name
-* source: string - a string used to generate a log message, to identify the source that triggered the recording
-* seconds: numeric - recording time in seconds. If set on 0, stops the current recording.
-=== cameraRecTriggerFull ===
- cameraRecTriggerFull(cameraName, source, seconds)
-Records video from a camera, like cameraRecTrigger(), but ignores the DroppedFrames parameter in hsyco.ini, so that all frames captured from the camera during the recording period are recorded with no skips.
-'''Parameters:'''
-* camera: string - the camera name
-* source: string - a string used to generate a log message, to identify the source that triggered the recording
-* seconds: numeric - recording time in seconds. If set on 0, stops the current recording.
-== Data Logger ==
-=== dataLoggerClear ===
- dataLoggerClear(name)
-Permanently deletes all historical data of the specified data logger.
-'''Parameters:'''
-* name: string - data logger name.
-'''Returns:'''
-* boolean - true if successful, false if not
-=== dataLoggerOptions ===
- dataLoggerOptions(name, param, value)
-Sets a specific option for the specified data logger.
-So far the only available option is “origin” which sets the x-bar of all the charts linked to the data logger to the passed value.
-'''Parameters:'''
-* name: string - data logger name
-* param: string - option to be set (“origin” is the only option you can currently set with this method)
-* value: string - value for the specified option.
-'''Returns:'''
-* boolean - true if successful, false if not
-=== dataLoggerSave ===
- dataLoggerSave(type, names, path, timestamp)
-Creates or updates a CSV file containing the data processed by the specified data loggers.
-The possible types are:
-* log: append the last acquired value by the data logger to the specified file
-* stat: updates the specified file with the currently gathered data by the specified data logger.
-'''Parameters:'''
-* type: string - log type (log or stat)
-* names: string array - data logger names
-* path: string - path of the file to be created
-* timestamp: boolean - if true and the type is log adds a timestamp column in the CSV file for the logged values.
-'''Returns:'''
-* boolean - true if successful, false if not
-'''Examples:'''
-The following code appends a new line every minute to the userdata/log.csv file with the most recent values of three data loggers, "a", "b" and "c".
-<syntaxhighlight lang="javascript">
- time : { dataLoggerSave('log', ['a','b','c'], 'userdata/log.csv', true); }
 </syntaxhighlight>
-=== dataLoggerUpdate ===
- dataLoggerUpdate(name, value)
-Supplies the specified data logger with a new value to be processed.
-'''Parameters:'''
-* name: string - data logger name
-* value: numeric - value to be processed. Setting value to null, with counter data loggers only, resets the internal delta baseline.
-'''Returns:'''
-* boolean - true if successful, false if not
-== DMX ==
-=== dmxGet ===
- dmxGet(channel)
-=== dmxOff ===
- dmxOff(channel)
-=== dmxOn ===
- dmxOn(channel)
-=== dmxMerge ===
- dmxMerge(fromChannel, toChannel, merge)
-=== dmxSet ===
- dmxSet(channel, state)
-== Infrared Control ==
-=== irtransCommand ===
- irtransCommand(irId, command)
-== I/O Servers ==
-=== deviceFunctionGet ===
- deviceFunctionGet(name)
-=== ioGet ===
- ioGet(id)
-=== ioServersRestart ===
- ioServersRestart(name)
-=== ioServersStop ===
- ioServersStop(name)
-=== ioSet ===
- ioSet(id, value)
-== Leak Detector ==
-=== leakDetectorClear ===
- leakDetectorClear(name)
-=== leakDetectorOptions ===
- leakDetectorOptions(name, param, value)
-=== leakDetectorUpdate ===
- leakDetectorUpdate(name, value)
-== Log ==
-=== errorLog ===
- errorLog(message)
-=== fileLog ===
- fileLog(pathname, message)
-=== messageLog ===
- messageLog(message)
-== Mail ==
-=== sendMail ===
- sendMail(to, from, subject, body)
-== Modbus ==
-=== modbusReadCoils ===
- modbusReadCoils(name, unit, address, quantity)
-=== modbusReadDiscreteInputs ===
- modbusReadDiscreteInputs(name, unit, address, quantity)
-=== modbusReadHoldingRegisters ===
- modbusReadHoldingRegisters(name, unit, address, quantity)
-=== modbusReadInputRegisters ===
- modbusReadInputRegisters(name, unit, address, quantity)
-=== modbusWriteMaskRegister ===
- modbusWriteMaskRegister(name, unit, address, mask, bytes)
-=== modbusWriteMultipleCoils ===
- modbusWriteMultipleCoils(name, unit, address, coils, bytes)
-=== modbusWriteMultipleRegisters ===
- modbusWriteMultipleRegisters(name, unit, address, bytes)
-=== modbusWriteSingleCoil ===
- modbusWriteSingleCoil(name, unit, address, value)
-=== modbusWriteSingleRegister ===
- modbusWriteSingleRegister(name, unit, address, bytes)
-== Network Services ==
-=== ping ===
- ping(host, timeout)
-=== wakeOnLan ===
- wakeOnLan(broadcast, address)
-== Public Announcement ==
-=== audioPlayFile ===
- audioPlayFile(where, file)
-=== audioPlayText ===
- audioPlayText(where, voice, text)
-== Serial Communication Ports ==
-=== closeComm ===
- closeComm(portName)
-=== readComm ===
- readComm(portName, len)
-=== writeComm ===
- writeComm(portName, data)
-== Squeezebox ==
-=== slimButton ===
- slimButton(player, button)
-=== slimCommand ===
- slimCommand(player, command)
-== User Interface ==
-=== uiClear ===
- uiClear(session)
-=== uiGet ===
- uiGet(id, attr)
-=== uiSessionGet ===
- uiSessionGet(session, id, attr)
-=== uiSessionSet ===
- uiSessionSet(session, id, attr, value)
-=== uiSet ===
- uiSet(id, attr, value)
-=== user ===
- user(name, param)

Difference between revisions of "JavaScript Callback Functions API"

Latest revision as of 14:27, 8 July 2015

Contents

System Functions

DaylightEvent

haActiveEvent

PowerEvent

programTimerEvent

SchedulerEvent

StartupEvent

SunPositionEvent

TimeEvent

varEvent

Cameras

CameraCommandEvent

CameraMotionEvent

CameraViewEvent

DMX

DmxEvent

DmxFilter

DmxStartupEvent

Infrared Control

IREvent

I/O Servers

IOEvent

IOStartupEvent

Modbus

ModbusEvent

Network Services

httpCallEvent

LocationEvent

SysLogEvent

PBX

PBXCallEvent

Squeezebox

SlimPowerEvent

SlimStatusEvent

SlimVolumeEvent

Timers and Schedulers

UserTimerEvent

User Interface

pageEvent

uiClearEvent

userCommand

userSubmit

WebRootRequestEvent

Navigation menu

Search