Difference between revisions of "Strato"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| + | [[Category:I/O Server]] | ||
| + | |||
Strato Pi is an expansion board developed by Sfera Labs for the Raspberry Pi computer board. | Strato Pi is an expansion board developed by Sfera Labs for the Raspberry Pi computer board. | ||
| Line 11: | Line 13: | ||
*buzzer for audible feedback. | *buzzer for audible feedback. | ||
| − | |||
| − | |||
| − | |||
== HSYCO Configuration == | == HSYCO Configuration == | ||
Revision as of 14:47, 17 August 2015
Strato Pi is an expansion board developed by Sfera Labs for the Raspberry Pi computer board.
Strato Pi implements a number of hardware features to expand the Pi and allow its use in professional applications:
- 9-28 Vdc extended-range power supply
- integrated UPS with external NiCd rechargeable battery
- real-time clock with dedicated back-up battery
- opto-isolated RS-232 or RS-485 serial port
- configurable hardware watchdog
- buzzer for audible feedback.
Contents
HSYCO Configuration
Add a STRATO I/O Server in the I/O Servers section of the Settings and set its parameters.
Note that the Strato I/O Server doesn't count in the I/O servers license total, so you don't need an extra I/O Server license to use Strato with HSYCO.
High Availability
- Shutdown when inactive: defaults to false.
Options
| ID | Default | Values | Description |
|---|---|---|---|
| startupevents | true | true | generate IO events also during the driver’s start-up phase |
| false | start generating events only after HSYCO is aligned with the current status of the system | ||
| pollinterval | 0 | 0 | the driver will use the push notifications sent by iono to monitor its changes |
| int > 0 | the driver will poll iono's state with the specified time interval (in seconds). Push notifications won't be enabled | ||
| input1 | digital | digital | the specified multi-mode input will be read as digital signal (DI<n>) |
| input2 | |||
| input3 | voltage | the specified multi-mode input will be read as analog voltage (AV<n>) | |
| input4 | current | the specified multi-mode input will be read as analog current (AI<n>) | |
| stabletime | 100 | int > 0 | number of milliseconds an input must be stable before a push notification is sent by iono to HSYCO |
| minvariation | 0.1 | float > 0 | minimun value variation (for analog inputs) to trigger a push notification |
| subscribehost | <host_name> | hostname or IP address to be used by iono to send push notifications. Leave blank to let the driver discover the local address |
Datapoints
For inputs 1 to 4, depending on the 'input1' ... 'input4' options, only the corresponding datapoint will be created, i.e. di<n> (if digital), av<n> (if voltage) or ai<n> (if curent).
| ID | Value | R/W | Description |
|---|---|---|---|
| connection | online | R | connection established |
| offline | R | HSYCO can't connect to the device | |
| do<n> | 0 | R | relay <n> (digital output) is off |
| W | switch off relay <n> | ||
| 1 | R | relay <n> (digital output) is on | |
| W | switch on relay <n> | ||
| di<n> | 0 | R | digital input <n> is low |
| 1 | R | digital input <n> is high | |
| av<n> | <val> | R | analog input <n> is reading a voltage equal to <val> (in Volts) |
| ai<n> | <val> | R | analog input <n> is reading a current equal to <val> (in mA) |
| ao1 | <val> | W | set the analog output to <val> Volts |
User Interface
To control a digital output (DO1 ... DO6), add a button or a buttonicon object to your project page and set its address field to the corresponding datapoint:
Release Notes
3.5.0
- initial release
Strato is a registered trademarks of Home Systems Consulting S.p.A.
