Ats

Aritech ATS panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the serial module.

Communication

Employ an RS-232 cable to connect the panel directly to HSYCO or to an Ethernet/RS-232 gateway. The cable must follow this pinout diagram:

RS-232 parameters:

Baud rate	same as panel settings (default 4800)
Data bits	8
Stop bit	1
Parity	none
Flow control	RTS/CTS

HSYCO Configuration

Options

ID	Default	Values	Description
gui	true	true	enable support for the UI object, UISET actions and USER commands
		false	disable UI support
startupevents	false	true	generate IO events also during the driver’s start-up phase
		false	start generating events only after HSYCO is aligned with the current status of the system
pollinterval	5	n > 0	the data acquisition interval, in seconds
logsize	20	n ≥ 0	the number of log lines to display in the UI object
maxzone	256	0 ≤ n ≤ 256	highest zone index set on the panel. This option is recommended to improve the I/O Server's performances
maxoutput	256	0 ≤ n ≤ 256	highest output index set on the panel. This option is recommended to improve the I/O Server's performances
maxras	16	0 ≤ n ≤ 16	highest RAS (Remote Arming Station) index set on the panel. This option is recommended to improve the I/O Server's performances

ats.ini

The ats.ini file is a specific configuration file located in the root directory. Here you can define the names of zones and areas so that they will be automatically added to the user interface. Add a new line for each name using this format:

<io_server_id>.zone.<n> = <name>
<io_server_id>.area.<n> = <name>

For instance:

ats.zone.1 = Kitchen
ats.zone.2 = Corridor
ats.area.1 = Floor 1

Datapoints

ID	Value	R/W	Description