Yamaha RX

From HSYCO
Jump to navigation Jump to search

The Yamaha RX series is a collection of multi-source, multi-zone AV receiver/amplifier that can be integrated to work with external control systems and servers via ethernet connection.

This I/O server has been tested on the following models: RX-V1067, RX-V2067, RX-V3067, RX-V777 and RXA-2030 SINTO DSP.

It should be compatible as well with the following models: RX-A740, RX-A840, RX-A1040, RX-A2040, RX-A3040, RX-V677, RX-V1077, RX-V2077 and RX-V3077.

Yamaha Configuration

In order to be able to control the device with HSYCO SERVER some initial configuration of the Yamaha device is needed.

Using the supplied remote control, go to the "home screen" and select the "setup" menu. From here, configure the network setting a fixed IP address compatible with the network the device is connected to. Further, make sure the option "network standby" is set to "on".

HSYCO Configuration

Add a YAMAHARX I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

  • IP Address: the IP address of the device.

High Availability

  • Shutdown when inactive: defaults to true.

Options

ID Default Values Description
gui true true enable support for UISET actions and USER commands
false disable UI support
pollinterval 1 n > 0 the data acquisition interval, in seconds

Datapoints

For datapoints addressing a specific zone, replace <zone> with the name of the zone, i.e. use "main" for the main zone and "z2", "z3" or "z4" for the other zones (the number of zones depends on the Yamaha model).

ID Value R/W Description
connection online R connection established
offline R HSYCO can't connect to the panel
system.power 1 R at least one zone is on
W turn all zones on
0 R all zones are off
W turn all zones off
system.party

(for models supporting this feature)

1 R party mode is on
W set party mode on
0 R party mode is off
W set party mode off
<zone>.power 1 R zone <zone> is on
W turn zone <zone> on
0 R zone <zone> is off
W turn zone <zone> off
<zone>.sleep off R the sleep time of this zone is set to off
W set the sleep time of this zone to off
30 R the sleep time of this zone is set to 30 minutes
W set the sleep time of this zone to 30 minutes
60 R the sleep time of this zone is set to 60 minutes
W set the sleep time of this zone to 60 minutes
90 R the sleep time of this zone is set to 90 minutes
W set the sleep time of this zone to 90 minutes
120 R the sleep time of this zone is set to 120 minutes
W set the sleep time of this zone to 120 minutes
<zone>.source <src>[Note 1] R the source for this zone is set to <src>[Note 1]
W set the source for this zone to <src>[Note 1]
<zone>.source.name <name> R the current source on this zone is named <name>
<zone>.volume off R this zone volume is muted
W mute this zone
on W un-mute this zone
1% ... 100% R this zone's volume is set to the reported value
W set this zone's volume to the specified value (the '%' character can be omitted)
up W increase this zone's volume
down W decrease this zone's volume
<zone>.mute 1 R this zone's volume is muted
W mute this zone
0 R this zone's volume is not muted
W un-mute this zone
main.scene 1 ... 12 W set the main zone to the specified scene number
z<n>.scene 1 ... 4 W set zone <n> to the specified scene number
main.surround <prg>[Note 2] R the surround program is set to <prg>[Note 2]
W set the surround program to <prg>[Note 2]
main.enhancer 1 R the enhancer is on
W set the enhancer on
0 R the enhancer is off
W set the enhancer off

Note 1 
The main zone accepts the following parameters as sources: "av1", "av2", "av3", "av4", "av5", "av6", "av7", "tuner", "phono", "vaux", "multich", "ipod", "pc", "hdmi", "netradio", "usb", "audio1", "audio2", "audio3", "audio4". The other zones accept the following parameters as source: "av1", "av2", "av3", "av4", "tuner", "phono", "vaux", "ipod", "pc", "hdmi", "netradio", "usb", "audio1", "audio2", "audio3", "audio4".

Note 2 
The following is the list of accepted surround programs for the main zone: "straight", "hallinmunich", "hallinvienna", "chamber", "cellarclub", "theroxytheatre", "thebottomline", "sports", "actiongame", "roleplayinggame", "musicvideo", "standard", "spectacle", "scifi", "adventure", "drama", "monomovie", "2chstereo", "7chstereo", "surrounddecoder".

User Interface

UISET Actions

ID Attribute Set to
connection visible true when datapoint connection = offline
false when datapoint connection = online
system.power value ON when at least one zone is active
OFF when all zones are off
system.party

(for models supporting this feature)

value ON when party mode is on
OFF when party mode is off
visible true when the device is on
false when the device is off
<zone>.power value ON when the zone is on
OFF when the zone is off
<zone>.source value the source name, as set in the Yamaha device
visible true when the zone is on
false when the zone is off
<zone>.source.name value the user-defined source name
visible true when the zone is on
false when the zone is off
<zone>.sleep value OFF when the sleep time of this zone is set to off
30 min when the sleep time of this zone is set to 30 min
60 min when the sleep time of this zone is set to 60 min
90 min when the sleep time of this zone is set to 90 min
120 min when the sleep time of this zone is set to 120 min
visible true when the zone is on
false when the zone is off
<zone>.volume.status value MUTE when tis zone is muted
1% ... 100% when the volume is set to the shown value
visible true when the zone is on
false when the zone is off
main.surround value the active surround program for the main zone
visible true when the zone is on
false when the zone is off
main.enhancer value ON when the enhancer on the main zone is on
OFF when the enhancer on the main zone is off
visible true when the zone is on
false when the zone is off

USER Commands

Name Param Action
system power switch the state of the device on/off
on turn all zones on
off turn all zones off
party switch the party mode (for models supporting this feature)
<zone>.volume 0% mute the zone
1% ... 100% set the volume of the zone to the specified value
up increase volume of the zone by 5%
down decrease volume of the zone by 5%
<zone> power switch the zone on/off
on turn the zone on
off turn the zone off
sleep switch the sleep time of the zone (off → 30 min → 60 min → 90 min → 120 min → off)
mute mute/unmute the zone
<zone>.mute on mute the zone
off unmute the zone
<zone>.source <src>[Note 1] set the source for this zone to <src>[Note 1]
main.scene 1 ... 12 set the main zone to the specified scene number
z<n>.scene 1 ... 4 set zone <n> to the specified scene number
main.surround <prg>[Note 2] set the surround program to <prg>[Note 2]
main enhancer switch the enhancer of the main zone on/off
main.enhancer on activate the enhancer on the main zone
on deactivate the enhancer on the main zone

Release Notes

3.5.0

  • added support for RXA-2030
  • added support for hdmi sources selection
  • fixed bug for models not supporting party mode

3.4.0

  • added support for new RX-series models

3.0.0

  • initial version release



Yamaha is a registered trademark of Yamaha Corporation