Difference between revisions of "Dummy"
Line 160: | Line 160: | ||
== Release Notes == | == Release Notes == | ||
+ | |||
+ | === 3.0.0 === | ||
*initial release | *initial release |
Revision as of 16:44, 18 February 2014
The DUMMY I/O Server is a virtual server that doesn’t actually connect to any external system, but simulates basic lighting and automation devices. It could be used for project’s development, demonstrations, and to easily implement virtual devices with complex logic connecting to actual systems.
HSYCO Configuration
Options
ID | Default | Values | Description |
---|---|---|---|
discovery | true | true | automatically lists all virtual devices in the systemtopo.txt file |
false | auto-detect for devices is disabled | ||
lights | 10 | 0 ... 10000 | number of on/off light devices to generate |
dimmers | 10 | 0 ... 10000 | number of dimmer devices to generate |
automations | 10 | 0 ... 10000 | number of automation devices to generate |
Datapoints
ID | Value | R/W | Description |
---|---|---|---|
connection | online | R | I/O Server ready |
light.<n> | 0 | R | light <n> is off |
W | switch off light <n> | ||
off | W | ||
1 | R | light <n> is on | |
W | switch on light <n> | ||
on | W | ||
dimmer.<n> | 0 | R | dimmer <n> is off |
W | switch off dimmer <n> | ||
off | W | ||
1 | W | switch on dimmer <n> | |
on | W | ||
1% ... 100% | R | the light level of dimmer <n> corresponds to the reported value | |
W | set the light level of dimmer <n> to the specified value | ||
autom.<n> | offup | R | autom <n> is stopped in upper position
(set to this value 30 seconds after a 'up' command) |
offdown | R | autom <n> is stopped in lower position
(set to this value 30 seconds after a 'down' command) | |
stop | W | stop autom <n> | |
off | |||
0 | |||
up | R | autom <n> is moving upwards (opening) | |
W | move autom <n> upwards | ||
down | R | autom <n> is moving downwards (closing) | |
W | move autom <n> downwards |
Virtual automation devices automatically go to the offup or offdown state 30 seconds after the up or down command.
User Interface
All the devices that have been added in systemtopo.txt (automatically or manually) are listed in the Project Editor and can be directly associated to button and dimmer objects.
For example, adding a slider for a dimmer requires just a few clicks and no additional EVENTS logic.
Release Notes
3.0.0
- initial release