Difference between revisions of "MQTTBROKER"
Jump to navigation
Jump to search
Line 37: | Line 37: | ||
|rowspan="2"|false | |rowspan="2"|false | ||
|true | |true | ||
− | |accept connection from clients whose id isn't specified in | + | |accept connection from clients whose id isn't specified in mqttbrokerauth.ini |
|- | |- | ||
|false | |false | ||
− | |doesn't accept connection from clients whose id isn't specified in | + | |doesn't accept connection from clients whose id isn't specified in mqttbrokerauth.ini |
|} | |} |
Revision as of 10:27, 22 July 2019
This driver acts as an MQTT broker for Hsyco. It can connects with many clients but can only receive messages without forwarding them.
HSYCO Configuration
Add the MQTTBROKER I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- IP Address: host name or IP address of the broker
- IP Port: TCP/IP port assigned to the broker
Authentication
- Username: optional default username for clients
- Password: optional default password for clients
Options
ID | Default | Values | Description |
---|---|---|---|
startupevents | false | true | generate IO events also during the driver’s start-up phase |
false | start generating events only after HSYCO is aligned with the current status of the system | ||
acceptunknown | false | true | accept connection from clients whose id isn't specified in mqttbrokerauth.ini |
false | doesn't accept connection from clients whose id isn't specified in mqttbrokerauth.ini |
Datapoints
ID | Value | R/W | Description |
---|---|---|---|
connection | online | R | connection established |
offline | R | initialization of the driver failed or loop cycle failed | |
client.<clientId>.connected | 1 | R | clientId is connected to the broker |
0 | R | clientId isn't connected to the broker | |
client.<clientId>.topic.<topicName> | <message> | R | clientId published a message on topicName |