Difference between revisions of "Hidedgesolo"
Line 51: | Line 51: | ||
|rowspan="2" |card.notfound | |rowspan="2" |card.notfound | ||
− | |code | + | |<code> |
|R | |R | ||
|badge <code> not found | |badge <code> not found | ||
|} | |} |
Revision as of 15:07, 23 December 2013
The HID Edge solo ESR40, ESRP40, ES400 are single-door IP access control solution. This driver allows the integration of HID Edge Solo devices by using a TCP/IP connection. More than one device can be controlled at the same time.
Communication
An IP address must be assigned to the HID Edge Solo.
HID Edge Solo configuration
The HID Edge Solo can be connected to a POE switch or to a normal ethernet switch. In this case the power supply must be provided with an external adapter. First of all, assign an IP address to the Edge Solo, then it’s mandatory to disable the SSL/TLS encryption in the installer settings interface.
HSYCO Configuration
You have to define an I/O Server in the hsyco.ini configuration file, for example:
ioServers = hid ioServersIP.hid = 192.168.1.57 ioServersType.hid = HIDEDGESOLO ioServersAuth.hid.User = admin ioServersAuth.hid.Password = 0000000
The ioServersType parameter must be set to “HIDEDGESOLO”, as this is the I/O driver’s type name, while the id of the I/O Server (i.e. “hid”) can be changed. Username and password are the same as defined in the installer settings of the Edge Solo.
Datapoints
ID | Value | R/W | Description |
---|---|---|---|
connection | online | R | connection established |
offline | R | HSYCO can't connect to the panel | |
card.notfound |
|
R | badge not found
|