Difference between revisions of "Avigilon"

From HSYCO
Jump to navigation Jump to search
Line 10: Line 10:
 
Here's an example of how to configure Avigilon Control Center to get a message from HSYCO and trigger an action.
 
Here's an example of how to configure Avigilon Control Center to get a message from HSYCO and trigger an action.
  
[[File:IO Server Avigilon 2.png|center]]
+
[[File:IO Server Avigilon 2.png|center|600px]]
  
 
== HSYCO Configuration ==
 
== HSYCO Configuration ==

Revision as of 15:41, 26 May 2020

Avigilon Control Center (ACC) 7 is a video management software that can be integrated in HSYCO with a TCP/IP connection. The current release of the I/O Server has been tested with the Avigilon Control Center 7.6.0.22

Note This driver supports only a single connection with an Avigilon Control Server. If you have multiple Avigilon Control Servers it is mandatory to add more I/O servers to HSYCO, one for each Avigilon Control Server. Every I/O server must use a different TCP/IP port.

Communication

Here's an example of how to configure Avigilon Control Center to get a message from HSYCO and trigger an action.

IO Server Avigilon 2.png

HSYCO Configuration

Add an AVIGILON I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

  • IP Address: IP address of the AVIGILON ACC 7 server. Set to 0.0.0.0 to allow any remote IP address to connect.
  • IP Port: TCP/IP port to use, leave blank to use default port 10001

High Availability

  • Shutdown when inactive: defaults to false.


Release Notes

3.7.0

  • initial release


AVIGILON is a registered trademark of Avigilon Corporation