Cradlepoint
The Cradlepoint driver for HSYCO allows you to monitor the real-time status of the Cradlepoint IBR6xx series of routers.
Contents
HSYCO Configuration
Add a CRADLEPOINT I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- IP Address: LAN IP address of the IBR6xx router
- IP Port: TCP/IP port to use for the SSH CLI (Command Line Interface), leave blank to use default port 22.
High Availability
- Shutdown when inactive: defaults to false.
Options
| ID | Default | Values | Description |
|---|---|---|---|
| startupevents | false | true | generate IO events also during the driver’s start-up phase |
| false | start generating events only after HSYCO is aligned with the current status of the system | ||
| query | /status/wan/connection_state /status/system/wan_signal_strength /status/wan/stats | space-separated pathnames | this parameter can be used to retrieve specific status data from the router. Use / to retrieve all data (note that using / the router will need several seconds to return all data, and the number of generated data points will be huge. You should specify the / full path only for development purposes |
Datapoints
The status information that the driver retrieves from the Cradlepoint router depends on the pathnames defined in the query option.
Refer to the CRADLEPOINT Router CLI Overview document for the description of the file system structure and the list of valid directories. Each directory contains status information that this driver translates into standard HSYCO data points.
When no query option is explicitly set, the driver retrieves all data located in the following directories:
- /status/wan/connection_state
- /status/system/wan_signal_strength
- /status/wan/stats
| ID | Value | R/W | Description |
|---|---|---|---|
| send | <command_code> | W | send the specified control command (see table below) |
Release Notes
3.3.1
- initial release version
Cradlepoint is a registered trademark of CradlePoint Technology, Inc. 2014'
