MQTTBROKER

From HSYCO
Revision as of 10:16, 22 July 2019 by Gianluca (talk | contribs)
Jump to navigation Jump to search

This driver acts as an MQTT broker for Hsyco. It can connects with many clients but can only receive messages without forwarding them.

HSYCO Configuration

Add the MQTTBROKER I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

  • IP Address: host name or IP address of the broker
  • IP Port: TCP/IP port assigned to the broker

Authentication

  • Username: default username
  • Password: default password

Options

ID Default Values Description
startupevents false true generate IO events also during the driver’s start-up phase
false start generating events only after HSYCO is aligned with the current status of the system
acceptunknown false true accept connection from clients whose id isn't specified in the authentication file
false doesn't accept connection from clients whose id isn't specified in the authentication file

Datapoints

ID Value R/W Description
connection online R connection established
offline R initialization of the driver failed or loop cycle failed
client.<clientId>.connected 1 R clientId is connected to the broker
0 R clientId isn't connected to the broker
client.<clientId>.connected <value> R identifier of target <m> (associated with alarm <n>)