CSx75
Aritech CSx75 is a multi-area security system. The integration with HSYCO can be accomplished via direct control through the RS-232 port on its panel.
Contents
Communication
Use the Aritech CS590 RS232 cable to connect the panel directly to HSYCO or to an Ethernet/RS-232 gateway.
RS-232 parameters:
Baud rate | same as configured on panel (default 9600) |
Data bits | 8 |
Stop bit | 1 |
Parity | none |
Flow control | none |
CSx75 Configuration
The panel must be previously configured to have the serial port enabled and to use the binary control protocol. Refer to its configuration manual for more details.
HSYCO Configuration
Options
ID | Default | Values | Description |
---|---|---|---|
pin | <code> | 4 or 6-digits code. Use the specified PIN code to perform operations that require user authentication. If this option is not specified it will be required to manually insert the pin every time such operations are performed | |
gui | true | true | enable support for the UI object, UISET actions and USER commands |
false | disable UI support | ||
startupevents | false | true | generate IO events also during the driver’s start-up phase |
false | start generating events only after HSYCO is aligned with the current status of the system | ||
pollinterval | 3 | n > 0 | the data acquisition interval, in seconds |
logsize | 20 | n ≥ 0 | the number of log lines to display in the UI object |
csx75.ini
The csx75.ini file is a specific configuration file located in the root directory. Here you can define the names of the users so that they will be automatically added to the user interface. Add a new line for each user using this format:
<io_server_id>.user.<n> = <name>
For instance:
cs.user.1 = Bob cs.user.2 = Alice
Datapoints
ID | Value | R/W | Description |
---|---|---|---|
connection | online | R | connection established |
offline | R | HSYCO can't connect to the panel | |
alarm | 0 | R | no partition is alarmed |
1 | R | at least one partition is alarmed | |
armed | 0 | R | all partitions are disarmed |
W | disarm all partitions | ||
1 | R | the system is (partially) armed | |
away | W | arm all partitions in away mode | |
stay | W | arm all partitions in stay mode | |
auto | W | initiate auto-arm for all partitions | |
p<n>.armed | 0 | R | partition <n> is disarmed |
W | disarm partition <n> | ||
away | R | partition <n> is armed in away mode | |
W | arm partition <n> in away mode | ||
stay | R | partition <n> is armed in stay mode | |
W | arm partition <n> in stay mode | ||
auto | W | initiate auto-arm on partition <n> | |
p<n>.alarm | 0 | R | partition <n> is not in an alarm state |
1 | R | partition <n> is in an alarm state | |
p<n>.tamper | 0 | R | no tamper condition for partition <n> |
1 | R | partition <n> has been tampered | |
p<n>.last.user | <num> | R | last user number entered was <num> |
p<n>.fire | 0 | R | no fire on partition <n> |
1 | R | fire on partition <n> | |
p<n>.fire.trouble | 0 | R | no fire trouble on partition <n> |
1 | R | fire trouble on partition <n> | |
p<n>.buzzer | 0 | R | buzzer off on partition <n> |
1 | R | buzzer on on partition <n> | |
W | start buzzer on partition <n> | ||
p<n>.tlm.fault | 0 | R | TLM ok |
1 | R | TLM memory fault | |
p<n>.instant | 0 | R | instant flag not set on partition <n> |
1 | R | instant flag set on partition <n> | |
p<n>.siren | 0 | R | siren off on partition <n> |
1 | R | siren on on partition <n> | |
p<n>.steady.siren | 0 | R | steady siren off on partition <n> |
1 | R | steady siren on on partition <n> | |
p<n>.alarm.mem | 0 | R | alarm memory flag not set on partition <n> |
1 | R | alarm memory flag set on partition <n> | |
p<n>.cancel | 0 | R | no cancel command entered on partition <n> |
1 | R | cancel command entered on partition <n> | |
W | issue cancel command | ||
p<n>.exit.silent | 0 | R | silent exit disabled on partition <n> |
1 | R | silent exit enabled on partition <n> | |
W | enable silent exit for this arm cycle on partition <n> | ||
p<n>.chime.mode | 0 | R | chime mode off on partition <n> |
1 | R | chime mode on on partition <n> | |
toggle | W | toggle chime mode on partition <n> | |
p<n>.entry | 0 | R | entry inactive on partition <n> |
1 | R | entry active on partition <n> | |
p<n>.delay.exp | 0 | R | delay expiration warning off |
1 | R | delay expiration warning on | |
p<n>.exit.1 | 0 | R | exit 1 inactive on partition <n> |
1 | R | exit 1 active on partition <n> | |
p<n>.exit.2 | 0 | R | exit 2 inactive on partition <n> |
1 | R | exit 2 active on partition <n> | |
p<n>.exit.error | 0 | R | exit error not triggered on partition <n> |
1 | R | exit error triggered on partition <n> | |
p<n>.night.mode | 0 | R | night mode inactive on partition <n> |
1 | R | night mode active on partition <n> | |
p<n>.reexit | 0 | R | re-exit inactive on partition <n> |
1 | R | re-exit active on partition <n> | |
p<n>.force.arm | 0 | R | no force arm triggered on partition <n> |
1 | R | force arm triggered by auto arm on partition <n> | |
p<n>.arm.ready | 0 | R | partition <n> not ready to arm |
1 | R | partition <n> ready to arm | |
p<n>.force.arm.ready | 0 | R | partition <n> not ready to force arm |
1 | R | partition <n> ready to force arm | |
p<n>.chime | 0 | R | chime off on partition <n> |
1 | R | chime on on partition <n> | |
p<n>.error.beep | 0 | R | error beep off on partition <n> |
1 | R | error beep on on partition <n> | |
p<n>.tone | 0 | R | activation tone off on partition <n> |
1 | R | activation tone on on partition <n> |