Arteco

Arteco Everywhere is a general purpose digital input-output Ethernet controller. It is available in two versions, a 4 inputs, 4 outputs module, and an 8 inputs 8 outputs module. The ARTECOIO I/O Server in HSYCO creates a data point representation that you can use in the EVENTS language and Java to read the input pins and control the outputs. It also automatically allows you to create control objects for the Web user interface.

Arteco Configuration

The IP address must correspond to the IP address of the Arteco module. The port number is optional and can be omitted if the module is configured to the 80 default HTTP port number. The user and password parameters are also optional, and can be omitted if the module is configured with the default “admin” user and “arteco” password.

HSYCO Configuration

Options

ID	Default	Values	Description
startupevents	false	true	generate IO events also during the driver’s start-up phase
		false	start generating events only after HSYCO is aligned with the current status of the system
inputdiscovery	false	true	automatically creates the list of all inputs in the systemtopo.txt file. Should be enabled to allow the automatic update of (button) objects’ states
		false	auto-detect for input devices is disabled
outputdiscovery	false	true	automatically creates the list of all outputs in the systemtopo.txt file. Should be enabled to allow the automatic update of (button) objects’ states
		false	auto-detect for output devices is disabled
inputs	8	0...8	use input pins from 0 to 8
outputs	8	0...8	use output pins from 0 to 8

Datapoints

ID	Value	R/W	Description
connection	online	R	connection established
	offline	R	HSYCO can't connect to the panel
i<n>	0	R	input <n> is low
	1	R	input <n> is high
o<n>	0	R	output <n> is low
		W	set output <n> to off
	1	R	output <n> is high
		W	set output N to on
	flip	W	invert the status of output <n>
	blink	W	continuously blink output <n>
	pulse	W	set output <n> to on, then off after 1 sec.