Yamaha RX

The Yamaha RX series is a collection of multi-source, multi-zone AV receiver/amplifier that can be integrated to work with external control systems and servers via ethernet connection.

This I/O server has been tested on the following models: RX-V1067, RX-V2067, RX-V3067, RX-V777 and RXA-2030 SINTO DSP.

It should be compatible as well with the following models: RX-A740, RX-A840, RX-A1040, RX-A2040, RX-A3040, RX-V677, RX-V1077, RX-V2077 and RX-V3077.

Yamaha Configuration

In order to be able to control the device with HSYCO SERVER some initial configuration of the Yamaha device is needed.

Using the supplied remote control, go to the "home screen" and select the "setup" menu. From here, configure the network setting a fixed IP address compatible with the network the device is connected to. Further, make sure the option "network standby" is set to "on".

HSYCO Configuration

Add a YAMAHARX I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

• IP Address: the IP address of the device.

High Availability

• Shutdown when inactive: defaults to true.

Options

ID	Default	Values	Description
gui	true	true	enable support for UISET actions and USER commands
		false	disable UI support
pollinterval	1	n > 0	the data acquisition interval, in seconds

Datapoints

For datapoints addressing a specific zone, replace <zone> with the name of the zone, i.e. use "main" for the main zone and "z2", "z3" or "z4" for the other zones (the number of zones depends on the Yamaha model).

ID	Value	R/W	Description
connection	online	R	connection established
	offline	R	HSYCO can't connect to the panel
system.power	1	R	at least one zone is on
		W	turn all zones on
	0	R	all zones are off
		W	turn all zones off
system.party (for models supporting this feature)	1	R	party mode is on
		W	set party mode on
	0	R	party mode is off
		W	set party mode off
<zone>.power	1	R	zone <zone> is on
		W	turn zone <zone> on
	0	R	zone <zone> is off
		W	turn zone <zone> off
<zone>.sleep	off	R	the sleep time of this zone is set to off
		W	set the sleep time of this zone to off
	30	R	the sleep time of this zone is set to 30 minutes
		W	set the sleep time of this zone to 30 minutes
	60	R	the sleep time of this zone is set to 60 minutes
		W	set the sleep time of this zone to 60 minutes
	90	R	the sleep time of this zone is set to 90 minutes
		W	set the sleep time of this zone to 90 minutes
	120	R	the sleep time of this zone is set to 120 minutes
		W	set the sleep time of this zone to 120 minutes
<zone>.source	<src>[Note 1]	R	the source for this zone is set to <src>[Note 1]
		W	set the source for this zone to <src>[Note 1]
<zone>.source.name	<name>	R	the current source on this zone is named <name>
<zone>.volume	off	R	this zone volume is muted
		W	mute this zone
	on	W	un-mute this zone
	1% ... 100%	R	this zone's volume is set to the reported value
		W	set this zone's volume to the specified value (the '%' character can be omitted)
	up	W	increase this zone's volume
	down	W	decrease this zone's volume
<zone>.mute	1	R	this zone's volume is muted
		W	mute this zone
	0	R	this zone's volume is not muted
		W	un-mute this zone
main.scene	1 ... 12	W	set the main zone to the specified scene number
z<n>.scene	1 ... 4	W	set zone <n> to the specified scene number
main.surround	<prg>[Note 2]	R	the surround program is set to <prg>[Note 2]
		W	set the surround program to <prg>[Note 2]
main.enhancer	1	R	the enhancer is on
		W	set the enhancer on
	0	R	the enhancer is off
		W	set the enhancer off

Note 1 

The main zone accepts the following parameters as sources: "av1", "av2", "av3", "av4", "av5", "av6", "av7", "tuner", "phono", "vaux", "multich", "ipod", "pc", "hdmi", "netradio", "usb", "audio1", "audio2", "audio3", "audio4". The other zones accept the following parameters as source: "av1", "av2", "av3", "av4", "tuner", "phono", "vaux", "ipod", "pc", "hdmi", "netradio", "usb", "audio1", "audio2", "audio3", "audio4".

Note 2 

The following is the list of accepted surround programs for the main zone: "straight", "hallinmunich", "hallinvienna", "chamber", "cellarclub", "theroxytheatre", "thebottomline", "sports", "actiongame", "roleplayinggame", "musicvideo", "standard", "spectacle", "scifi", "adventure", "drama", "monomovie", "2chstereo", "7chstereo", "surrounddecoder".

User Interface

UISET Actions

ID	Attribute	Set to
connection	visible	true	when datapoint connection = offline
		false	when datapoint connection = online
system.power	value	ON	when at least one zone is active
		OFF	when all zones are off
system.party (for models supporting this feature)	value	ON	when party mode is on
		OFF	when party mode is off
	visible	true	when the device is on
		false	when the device is off
<zone>.power	value	ON	when the zone is on
		OFF	when the zone is off
<zone>.source	value	the source name, as set in the Yamaha device
	visible	true	when the zone is on
		false	when the zone is off
<zone>.source.name	value	the user-defined source name
	visible	true	when the zone is on
		false	when the zone is off
<zone>.sleep	value	OFF	when the sleep time of this zone is set to off
		30 min	when the sleep time of this zone is set to 30 min
		60 min	when the sleep time of this zone is set to 60 min
		90 min	when the sleep time of this zone is set to 90 min
		120 min	when the sleep time of this zone is set to 120 min
	visible	true	when the zone is on
		false	when the zone is off
<zone>.volume.status	value	MUTE	when tis zone is muted
		1% ... 100%	when the volume is set to the shown value
	visible	true	when the zone is on
		false	when the zone is off
main.surround	value	the active surround program for the main zone
	visible	true	when the zone is on
		false	when the zone is off
main.enhancer	value	ON	when the enhancer on the main zone is on
		OFF	when the enhancer on the main zone is off
	visible	true	when the zone is on
		false	when the zone is off

USER Commands

Name	Param	Action
system	power	switch the state of the device on/off
	on	turn all zones on
	off	turn all zones off
	party	switch the party mode (for models supporting this feature)
<zone>.volume	0%	mute the zone
	1% ... 100%	set the volume of the zone to the specified value
	up	increase volume of the zone by 5%
	down	decrease volume of the zone by 5%
<zone>	power	switch the zone on/off
	on	turn the zone on
	off	turn the zone off
	sleep	switch the sleep time of the zone (off → 30 min → 60 min → 90 min → 120 min → off)
	mute	mute/unmute the zone
<zone>.mute	on	mute the zone
	off	unmute the zone
<zone>.source	<src>[Note 1]	set the source for this zone to <src>[Note 1]
main.scene	1 ... 12	set the main zone to the specified scene number
z<n>.scene	1 ... 4	set zone <n> to the specified scene number
main.surround	<prg>[Note 2]	set the surround program to <prg>[Note 2]
main	enhancer	switch the enhancer of the main zone on/off
main.enhancer	on	activate the enhancer on the main zone
	on	deactivate the enhancer on the main zone

Release Notes

3.5.0

• added support for RXA-2030 SINTO DSP
• added support for hdmi sources selection
• fixed bug for models not supporting party mode

3.4.0

• added support for new RX-series models

3.0.0

• initial version release

---

Yamaha is a registered trademark of Yamaha Corporation