NMEA

From HSYCO
Jump to navigation Jump to search

The NMEA I/O Server implements a basic NMEA 0183 TCP client that connects to a NMEA 0183 source and receives all sentences, checking and discarding the checksum of valid messages, and ignoring invalid messages.

Different datapoints are generated for each sentence. The datapoint name is the lowercase sentence tag.

The value is a comma separated string of all fields following the tag. The checksum field and its "*" delimiter character are not included in the value string. The "$" or "!" start delimiters are not included in the datapoint names. Sentences not starting with the "$" or "!" start delimiters or with a wrong checksum are discarded.

HSYCO Configuration

Add an NMEA I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

  • IP Address: host name or IP address of the NMEA 0183 server
  • IP Port: TCP/IP port to use, leave blank to use default port 80

High Availability

  • Shutdown when inactive: defaults to false.

Options

n/a

Datapoints

ID Value R/W Description
connection online R connection established
offline R HSYCO can't connect to the Arteco Open Connector server
event value W send an event notification
io.<s>.<p> 0 R pin <p> of server <s> successfully set to 0
W set pin <p> of server <s> to 0
1 R pin pin <p> of server <s> successfully set to 1
W set pin <p> of server <s> to 1

You can send simple events, with only a text description, by writing a plain text message to the event datapoint, for example:

init : io connector.event = "this is the description of an event sent to Open Connector wevery time the events code is updated"

You can also sent any custom XML section data compatibile with the Open Connector protocol specification, by simply passing the full XML string of all relevant sections in the value, including empty sections, after the plain text description. For example, the following function cound be used to send an event with custom XML data:

function OCURLEventDataBlock(text, icon, label, datablock, url) {
	ioSet('connector.event', text + '<cameras />' + datablock +
		'<io /><web><web-device id="10"><icon id="' + icon + '" /><label>' + label + '</label><target><url>' +
		url + '</url></target></web-device></web>');
}

Release Notes

3.5.1

  • initial release


ARTECO is a registered trademark of Arteco Srl.