Difference between revisions of "Hidedgesolo"
Jump to navigation
Jump to search
Line 39: | Line 39: | ||
|R | |R | ||
|badge <nowiki><code></nowiki> not found | |badge <nowiki><code></nowiki> not found | ||
+ | |||
+ | |- | ||
+ | |||
+ | |rowspan="2" |pin.notfound | ||
+ | |<pin> | ||
+ | |R | ||
+ | |<pin> not found | ||
+ | |||
+ | |- | ||
+ | |||
+ | |rowspan="2" |access.granted | ||
+ | |<surname> | ||
+ | |R | ||
+ | | granted access for the user with surname <surname> | ||
|} | |} |
Revision as of 15:16, 23 December 2013
The HID Edge solo ESR40, ESRP40, ES400 are single-door IP access control solution. This driver allows the integration of HID Edge Solo devices by using a TCP/IP connection. More than one device can be controlled at the same time.
Communication
An IP address must be assigned to the HID Edge Solo.
HID Edge Solo configuration
The HID Edge Solo can be connected to a POE switch or to a normal ethernet switch. In this case the power supply must be provided with an external adapter. First of all, assign an IP address to the Edge Solo, then it’s mandatory to disable the SSL/TLS encryption in the installer settings interface.
Datapoints
ID | Value | R/W | Description |
---|---|---|---|
connection | online | R | connection established |
offline | R | HSYCO can't connect to the panel | |
card.notfound | <code> | R | badge <code> not found |
pin.notfound | <pin> | R | <pin> not found |
access.granted | <surname> | R | granted access for the user with surname <surname> |