Boschmap
The Bosch MPA panels are multi-area intrusion detection systems.
The integration with HSYCO can be accomplished via Ethernet connection.
Contents
HSYCO Configuration
Add a BOSCHMPA I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- IP Address: IP address of the panel
- IP Port: TCP/IP port to use, leave blank to use default port 6793.
Authentication
- Password: password set on for the BIS user. Leave blank to use the default password.
High Availability
- Shutdown when inactive: defaults to true.
Options
ID | Default | Values | Description |
---|---|---|---|
startupevents | false | true | generate IO events also during the driver’s start-up phase |
false | start generating events only after HSYCO is aligned with the current status of the system |
galaxy.ini
The boschmpa.ini file is a specific configuration file located in the root directory. This file is required to specify which areas and zones are configured on the panel and to assign them a name.
Add a new line for each area followed by a new line for each zone belonging to that area, using the following format:
<io_server_id>.<area_siid> = <name> <io_server_id>.<zone_siid> = <name>
where <area_siid>/<zone_siid> is the security identifier of the area/zone as specified in the configuration software of the panel.
For instance:
bsc.1.1.ControlPanelArea.1.1 = Control Panel bsc.1.1.Area.2.4 = Internal area bsc.1.1.Point.01001.006 = Front door bsc.1.1.Point.01001.007 = Back door bsc.1.1.Area.2.5 = External area bsc.1.1.Point.01001.008 = Gate
specifies three areas: the Control Panel area with no zones, an internal area with two zones and an external area with one zone.
Datapoints
ID | Value | R/W | Description |
---|---|---|---|
connection | online | R | connection established |
offline | R | HSYCO can't connect to the panel | |
<siid>.name | <name> | R | the name of the area/zone is set to <name> |
<area_siid>.armed | 0 | R | area disarmed |
W | disarm the area | ||
1 | R | area all armed, delayed | |
W | arm all the area, delayed | ||
2 | R | area all armed, delayed with bypass | |
W | arm all the area, instant | ||
3 | R | area all armed, instant | |
W | arm the area partially, delayed | ||
4 | R | area al armed, instant with bypass | |
W | arm the area partially, instant | ||
5 | R | area partially armed, delayed | |
W | custom-arm the area, delayed | ||
6 | R | area partially armed, delayed with bypass | |
W | custom-arm the area, instant | ||
7 | R | area partially armed, instant | |
W | arm all the area, delay zero | ||
8 | R | area partially armed, instant with bypass | |
W | arm the area partially, delay zero | ||
9 | R | area custom armed, delayed | |
W | custom-arm the area, delay zero | ||
10 | R | area custom armed, delayed with bypass | |
11 | R | area custom armed, instant | |
12 | R | area custom armed, instant with bypass | |
<area_siid>.ready.arm.instant | 0 | R | the area is not ready to be armed instantly |
1 | R | the area is ready to be armed instantly | |
<area_siid>.ready.arm.delay | 0 | R | the area is not ready to be armed with delay |
1 | R | the area is ready to be armed with delay | |
<area_siid>.ready.disarm | 0 | R | the area is not ready to be disarmed |
1 | R | the area is ready to be disarmed | |
<area_siid>.force.instant | 0 | R | the area is not ready to be force armed instantly |
1 | R | the area is ready to be force armed instantly | |
<area_siid>.force.delay | 0 | R | the area is not ready to be force armed with delay |
1 | R | the area is ready to be force armed with delay |