View source for Texecom

The Texecom Premier Elite control panels are advanced, multi-area security systems. The integration with HSYCO can be accomplished via RS-232 serial communication or via Ethernet connection.

This I/O Server has been tested with firmware version V3.02.00LS2.

[[Category:I/O Server]]

== Communication ==

RS-232 parameters:

{| class="wikitable"
| '''Baud rate'''
| 19200
|-
| '''Data bits'''
| 8
|-
| '''Stop bit'''
| 2
|-
| '''Parity'''
| none
|-
| '''Flow control'''
| none
|}

== HSYCO Configuration ==
Add a TEXECOM I/O Server in the [[Settings#I/O Servers|I/O Servers section of the Settings]] and set its parameters:

=== Communication ===
*'''Comm ID''': select the comm port the device is connected to.

=== High Availability ===
*'''Shutdown when inactive''': defaults to true.

=== Options ===

{| class="wikitable"
!ID
!Default
!Values
!Description

|-

|rowspan="2"|startupevents
|rowspan="2"|false
|true
|generate IO events also during the driver’s start-up phase
|-
|false
|start generating events only after HSYCO is aligned with the current status of the system

|-

|logsize
|20
|n &ge; 0
|the number of log lines to display in the UI object

|-

|pollinterval
|3
|n > 0
|the data acquisition interval, in seconds

|-

|maxzone
|256
|n > 0
|highest zone number among the ones used on the panel

|-

|maxpartition
|16
|n > 0
|highest partition number among the ones used on the panel

|-

|pinlength
|4
|n > 0
|length of the user pins

|}

== Datapoints ==

{| class="wikitable"
!ID
!Value
!R/W
!Description

|-

|rowspan="2" |connection
|online
|R
|connection established
|-
|offline
|R
|HSYCO can't connect to the panel

|-

|keypad.text
|<text>
|R
|reports the text shown by the keypad LCD

|-

|rowspan="2" |fault.ats
|0
|R
|no ATS Path Fault
|-
|1
|R
|ATS Path Fault

|-

|rowspan="2" |fault.mains
|0
|R
|Mains Power On
|-
|1
|R
|Mains Power Off

|-

|rowspan="2" |fault.fuse.aux
|0
|R
|Auxiliary Fuse OK
|-
|1
|R
|Auxiliary Fuse Blown

|-

|rowspan="2" |tamper.bell
|0
|R
|no bell tamper
|-
|1
|R
|bell tamper

|-

|rowspan="2" |tamper.aux
|0
|R
|no auxiliary tamper
|-
|1
|R
|auxiliary tamper

|-

|rowspan="2" |tamper.lid
|0
|R
|no panel lid tamper
|-
|1
|R
|panel lid tamper

|-

|rowspan="2" |engineer
|0
|R
|no engineer working
|-
|1
|R
|engineer working

|-

|rowspan="2" |confirm
|0
|R
|no confirm devices
|-
|1
|R
|confirm devices

|-

|rowspan="2" |service
|0
|R
|no service required
|-
|1
|R
|service required

|-

|rowspan="2" |fault.fuse.bell
|0
|R
|bell fuse OK
|-
|1
|R
|bell fuse blown

|-

|rowspan="2" |fault.battery
|0
|R
|battery OK
|-
|1
|R
|battery fault

|-

|rowspan="2" |test.battery
|0
|R
|battery test off
|-
|1
|R
|battery test on

|-

|rowspan="2" |light
|0
|R
|no courtesy light
|-
|1
|R
|courtesy light

|-

|rowspan="2" |open
|0
|R
|system closed
|-
|1
|R
|system open

|-

|rowspan="2" |armed
|0
|R
|not fully armed
|-
|1
|R
|fully armed

|-

|rowspan="2" |coms.fail
|0
|R
|coms OK
|-
|1
|R
|coms failed

|-

|rowspan="2" |coms.success
|0
|R
|no coms successful
|-
|1
|R
|coms successful

|-

|rowspan="2" |coms.active
|0
|R
|no coms active
|-
|1
|R
|coms active

|-

|rowspan="2" |udl.lockout
|0
|R
|no UDL lockout
|-
|1
|R
|UDL lockout

|-

|rowspan="2" |udl.call
|0
|R
|no UDL call active
|-
|1
|R
|UDL call active

|-

|rowspan="2" |udl.enabled
|0
|R
|UDL not enabled
|-
|1
|R
|UDL enabled

|-

|rowspan="2" |alarm.confirmed
|0
|R
|no confirmed alarm
|-
|1
|R
|confirmed alarm

|-

|rowspan="2" |custom1a
|0
|R
|no custom 1 stage A
|-
|1
|R
|custom 1 stage A

|-

|rowspan="2" |custom1b
|0
|R
|no custom 1 stage B
|-
|1
|R
|custom 1 stage B

|-

|rowspan="2" |custom2a
|0
|R
|no custom 2 stage A
|-
|1
|R
|custom 2 stage A

|-

|rowspan="2" |custom2b
|0
|R
|no custom 2 stage B
|-
|1
|R
|custom 2 stage B

|-

|rowspan="2" |custom2ab
|0
|R
|no custom 2 stage A or B
|-
|1
|R
|custom 2 stage A or B

|-

|rowspan="2" |radio.fail
|0
|R
|radio-pad OK
|-
|1
|R
|radio-pad failed

|-

|rowspan="2" |radio.success
|0
|R
|no radio-pad successful
|-
|1
|R
|radio-pad successful

|-

|rowspan="2" |radio.nosig
|0
|R
|radio-pad signal OK
|-
|1
|R
|no radio-pad signal

|-

|rowspan="2" |radio.lost
|0
|R
|radio-pad OK
|-
|1
|R
|radio-pad lost

|-

|rowspan="2" |custom3a
|0
|R
|no custom 3 stage A
|-
|1
|R
|custom 3 stage A

|-

|rowspan="2" |custom3b
|0
|R
|no custom 3 stage B
|-
|1
|R
|custom 3 stage B

|-

|rowspan="2" |custom3ab
|0
|R
|no custom 3 stage A or B
|-
|1
|R
|custom 3 stage A or B

|-

|rowspan="2" |custom4a
|0
|R
|no custom 4 stage A
|-
|1
|R
|custom 4 stage A

|-

|rowspan="2" |custom4b
|0
|R
|no custom 4 stage B
|-
|1
|R
|custom 4 stage B

|-

|rowspan="2" |custom4ab
|0
|R
|no custom 4 stage A or B
|-
|1
|R
|custom 4 stage A or B

|-

|rowspan="2" |com1.fault
|0
|R
|com 1 OK
|-
|1
|R
|com 1 fault

|-

|rowspan="2" |com2.fault
|0
|R
|com 2 OK
|-
|1
|R
|com 2 fault

|-

|rowspan="2" |com1.nosig
|0
|R
|com 1 signal OK
|-
|1
|R
|com 1 no signal

|-

|rowspan="2" |com2.nosig
|0
|R
|com 2 signal OK
|-
|1
|R
|com 2 no signal

|-

|rowspan="2" |coms.fault
|0
|R
|coms OK
|-
|1
|R
|coms fault

|-

|rowspan="2" |radio.jam
|0
|R
|no radio jamming
|-
|1
|R
|radio jamming

|-

|rowspan="2" |radio.tamper
|0
|R
|radio TX OK
|-
|1
|R
|radio TX tamper

|-

|rowspan="2" |test.detector
|0
|R
|no detector test
|-
|1
|R
|detector test

|-

|rowspan="2" |test.remote
|0
|R
|no ATS remote test
|-
|1
|R
|ATS remote test

|-

|rowspan="2" |noats
|0
|R
|ATS available
|-
|1
|R
|no ATS available

|-

|rowspan="2" |fault.cie
|0
|R
|no CIE fault
|-
|1
|R
|CIE fault

|-

|rowspan="2" |psu.fault.fuse
|0
|R
|PSU fuse OK
|-
|1
|R
|PSU fuse blown

|-

|rowspan="2" |psu.fault.battery
|0
|R
|PSU battery OK
|-
|1
|R
|PSU battery fault

|-

|rowspan="2" |test.wd
|0
|R
|WD test not active
|-
|1
|R
|WD test active

|-

|rowspan="2" |psu.fault.mains
|0
|R
|PSU mains OK
|-
|1
|R
|PSU mains fault

|-

|rowspan="2" |com1.power
|0
|R
|com 1 power off
|-
|1
|R
|com 1 power on

|-

|rowspan="2" |com2.power
|0
|R
|com 2 power off
|-
|1
|R
|com 2 power on

|-

|rowspan="2" |com3.power
|0
|R
|com 3 power off
|-
|1
|R
|com 3 power on

|-

|rowspan="2" |fault.ip
|0
|R
|IP path OK
|-
|1
|R
|IP path fault

|-

|rowspan="2" |battery.low
|0
|R
|battery OK
|-
|1
|R
|battery low

|-

|rowspan="2" |fault.ps
|0
|R
|PS OK
|-
|1
|R
|PS failure

|-

|rowspan="2" |fault.charger
|0
|R
|charger OK
|-
|1
|R
|charger fault

|-

|rowspan="2" |p<n>.alarm
|0
|R
|no alarm on partition <n>
|-
|1
|R
|alarm on partition <n>

|-

|rowspan="2" |p<n>.alarm.guard
|0
|R
|no guard alarm on partition <n>
|-
|1
|R
|guard alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.guard.access
|0
|R
|no guard access alarm on partition <n>
|-
|1
|R
|guard access alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.entry
|0
|R
|no entry alarm on partition <n>
|-
|1
|R
|entry alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.confirmed
|0
|R
|no confirmed alarm on partition <n>
|-
|1
|R
|confirmed alarm on partition <n>

|-

|rowspan="2" |p<n>.alarm.audible
|0
|R
|no 24h audible alarm on partition <n>
|-
|1
|R
|24h audible alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.silent
|0
|R
|no 24h silent alarm on partition <n>
|-
|1
|R
|24h silent alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.gas
|0
|R
|no 24h gas alarm on partition <n>
|-
|1
|R
|24h gas alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.pa
|0
|R
|no PA alarm on partition <n>
|-
|1
|R
|PA alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.pa.silent
|0
|R
|no PA silent alarm on partition <n>
|-
|1
|R
|PA silent alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.duress
|0
|R
|no duress alarm on partition <n>
|-
|1
|R
|duress alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.fire
|0
|R
|no fire alarm on partition <n>
|-
|1
|R
|fire alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.medical
|0
|R
|no medical alarm on partition <n>
|-
|1
|R
|medical alarm active on partition <n>

|-

|rowspan="2" |p<n>.alarm.aux
|0
|R
|no auxiliary alarm on partition <n>
|-
|1
|R
|auxiliary alarm active on partition <n>

|-

|rowspan="2" |p<n>.tamper
|0
|R
|no tamper alarm on partition <n>
|-
|1
|R
|tamper alarm active on partition <n>

|-

|rowspan="2" |p<n>.abort
|0
|R
|no abort on partition <n>
|-
|1
|R
|abort on partition <n>

|-

|rowspan="2" |p<n>.ready
|0
|R
|partition <n> not ready
|-
|1
|R
|partition <n> ready

|-

|rowspan="2" |p<n>.entry
|0
|R
|no entry
|-
|1
|R
|entry

|-

|rowspan="2" |p<n>.entry.2
|0
|R
|no second entry
|-
|1
|R
|second entry

|-

|rowspan="2" |p<n>.exit
|0
|R
|no exit
|-
|1
|R
|exit

|-

|rowspan="2" |p<n>.entryexit
|0
|R
|no entry/exit
|-
|1
|R
|entry/exit

|-

|rowspan="4" |p<n>.armed
|rowspan="2" |0
|R
|partition <n> not armed
|-
|W
|disarm partition <n>
|-
|rowspan="2" |1
|R
|partition <n> armed
|-
|W
|arm partition <n>

|-

|rowspan="2" |p<n>.armed.full
|0
|R
|partition <n> not full armed
|-
|1
|R
|partition <n> full armed

|-

|rowspan="3" |p<n>.armed.part
|0
|R
|partition <n> not part armed
|-
|rowspan="2" |1
|R
|partition <n> part armed
|-
|W
|part arm partition <n>

|-

|rowspan="2" |p<n>.arming.part
|0
|R
|partition <n> not part arming
|-
|1
|R
|partition <n> part arming

|-

|rowspan="2" |p<n>.armable.force
|0
|R
|partition <n> not force armable
|-
|1
|R
|partition <n> force armable

|-

|rowspan="2" |p<n>.armed.force
|0
|R
|partition <n> not force armed
|-
|1
|R
|partition <n> force armed

|-

|rowspan="2" |p<n>.armed.fail
|0
|R
|partition <n> arm ok
|-
|1
|R
|partition <n> arm failed

|-

|rowspan="2" |p<n>.bell.sab
|0
|R
|no bell SAB on partition <n>
|-
|1
|R
|bell SAB on partition <n>

|-

|rowspan="2" |p<n>.bell.scb
|0
|R
|no bell SCB on partition <n>
|-
|1
|R
|bell SCB on partition <n>

|-

|rowspan="2" |p<n>.strobe
|0
|R
|strobe off on partition <n>
|-
|1
|R
|strobe on on partition <n>

|-

|rowspan="2" |p<n>.detector.latch
|0
|R
|no detector latch on partition <n>
|-
|1
|R
|detector latch on partition <n>

|-

|rowspan="2" |p<n>.detector.reset
|0
|R
|no detector reset on partition <n>
|-
|1
|R
|detector reset on partition <n>

|-

|rowspan="2" |p<n>.test.walk
|0
|R
|no walk test on partition <n>
|-
|1
|R
|walk test on partition <n>

|-

|rowspan="2" |p<n>.bypass
|0
|R
|no bypassed zone in partition <n>
|-
|1
|R
|bypassed zones in partition <n>

|-

|rowspan="2" |p<n>.bypass24
|0
|R
|no 24h bypassed zone in partition <n>
|-
|1
|R
|24h bypassed zones in partition <n>

|-

|rowspan="3" |p<n>.reset
|0
|R
|no reset required on partition <n>
|-
|rowspan="2" |1
|R
|reset required on partition <n>
|-
|W
|reset partition <n>

|-

|rowspan="2" |p<n>.strike
|0
|R
|no door strike on partition <n>
|-
|1
|R
|door strike on partition <n>

|-

|rowspan="2" |p<n>.chime.mimic
|0
|R
|no chime mimic on partition <n>
|-
|1
|R
|chime mimic on partition <n>

|-

|rowspan="2" |p<n>.chime.enabled
|0
|R
|chime not enabled on partition <n>
|-
|1
|R
|chime enabled on partition <n>

|-

|rowspan="2" |p<n>.doubleknowck
|0
|R
|double knock not active on partition <n>
|-
|1
|R
|double knock active on partition <n>

|-

|rowspan="2" |p<n>.beampair
|0
|R
|no beam pair on partition <n>
|-
|1
|R
|beam pair on partition <n>

|-

|rowspan="2" |p<n>.test.zone
|0
|R
|no zone on test in partition <n>
|-
|1
|R
|zone on test in partition <n>

|-

|rowspan="2" |p<n>.test.fail
|0
|R
|test not failed on partition <n>
|-
|1
|R
|test failed on partition <n>

|-

|rowspan="2" |p<n>.alarm.internal
|0
|R
|no internal alarm on partition <n>
|-
|1
|R
|internal alarm on partition <n>

|-

|rowspan="2" |p<n>.arming.auto
|0
|R
|no auto arming on partition <n>
|-
|1
|R
|auto arming on partition <n>

|-

|rowspan="2" |p<n>.arming.time
|0
|R
|no time arming on partition <n>
|-
|1
|R
|time arming on partition <n>

|-

|rowspan="2" |p<n>.code.1
|0
|R
|first code not entered on partition <n>
|-
|1
|R
|first code entered on partition <n>

|-

|rowspan="2" |p<n>.code.2
|0
|R
|second code not entered on partition <n>
|-
|1
|R
|second code entered on partition <n>

|-

|rowspan="2" |p<n>.secured
|0
|R
|area not secured on partition <n>
|-
|1
|R
|area secured on partition <n>

|-

|rowspan="2" |p<n>.arm.part.1
|0
|R
|no part arm 1 on partition <n>
|-
|1
|R
|part arm 1 on partition <n>

|-

|rowspan="2" |p<n>.arm.part.2
|0
|R
|no part arm 2 on partition <n>
|-
|1
|R
|part arm 2 on partition <n>

|-

|rowspan="2" |p<n>.arm.part.3
|0
|R
|no part arm 3 on partition <n>
|-
|1
|R
|part arm 3 on partition <n>

|-

|rowspan="2" |p<n>.alarm.custom
|0
|R
|no custom alarm on partition <n>
|-
|1
|R
|custom alarm on partition <n>

|-

|rowspan="2" |p<n>.warning.zone
|0
|R
|no zone warning on partition <n>
|-
|1
|R
|zone warning on partition <n>

|-

|rowspan="2" |p<n>.warning.arm
|0
|R
|no arm fail warning on partition <n>
|-
|1
|R
|arm fail warning on partition <n>

|-

|rowspan="2" |p<n>.forced
|0
|R
|no forced entry on partition <n>
|-
|1
|R
|forced entry on partition <n>

|-

|rowspan="2" |p<n>.locked
|0
|R
|no zones locked out on partition <n>
|-
|1
|R
|zones locked out on partition <n>

|-

|rowspan="2" |p<n>.armed.all
|0
|R
|not all armed on partition <n>
|-
|1
|R
|all armed on partition <n>

|-

|rowspan="2" |p<n>.arm.time.disabled
|0
|R
|time arm not disabled on partition <n>
|-
|1
|R
|time arm disabled on partition <n>

|-

|rowspan="2" |p<n>.armedalarm
|0
|R
|not armed/alarm on partition <n>
|-
|1
|R
|armed/alarm on partition <n>

|-

|rowspan="2" |p<n>.alarm.intruder
|0
|R
|no intruder alarm on partition <n>
|-
|1
|R
|intruder alarm on partition <n>

|-

|rowspan="2" |p<n>.speaker.mimic
|0
|R
|no speaker mimic on partition <n>
|-
|1
|R
|speaker mimic on partition <n>

|-

|rowspan="2" |p<n>.armedexit
|0
|R
|no full armed/exit on partition <n>
|-
|1
|R
|full armed/exit on partition <n>

|-

|rowspan="2" |p<n>.detector.fault
|0
|R
|no detector fault on partition <n>
|-
|1
|R
|detector fault on partition <n>

|-

|rowspan="2" |p<n>.detector.masked
|0
|R
|no detector masked on partition <n>
|-
|1
|R
|detector masked on partition <n>

|-

|rowspan="2" |p<n>.fault
|0
|R
|no fault on partition <n>
|-
|1
|R
|fault on partition <n>

|-

|rowspan="2" |p<n>.led
|0
|R
|no LED control on partition <n>
|-
|1
|R
|LED control on partition <n>

|-

|rowspan="2" |p<n>.armed.full.entry
|0
|R
|no full armed entry on partition <n>
|-
|1
|R
|full armed entry on partition <n>

|-

|rowspan="2" |p<n>.fire
|0
|R
|no fire sounder on partition <n>
|-
|1
|R
|fire sounder on partition <n>

|-

|rowspan="2" |p<n>.pa.confirmed
|0
|R
|no PA confirmed on partition <n>
|-
|1
|R
|PA confirmed on partition <n>

|-

|rowspan="2" |p<n>.alarm.confirmed2
|0
|R
|no confirmed alarm on partition <n>
|-
|1
|R
|confirmed alarm on partition <n>

|-

|rowspan="2" |z<n>.open
|0
|R
|zone <n> is closed
|-
|1
|R
|zone <n> is open

|-

|rowspan="2" |z<n>.tamper
|0
|R
|zone <n> is not tampered
|-
|1
|R
|zone <n> is tampered

|-

|rowspan="2" |z<n>.short
|0
|R
|zone <n> is not shorted
|-
|1
|R
|zone <n> is shorted

|-

|rowspan="2" |z<n>.fault
|0
|R
|zone <n> is not faulty
|-
|1
|R
|zone <n> is faulty

|-

|rowspan="2" |z<n>.test
|0
|R
|no failed test on zone <n>
|-
|1
|R
|failed test on zone <n>

|-

|rowspan="2" |z<n>.alarm
|0
|R
|zone <n> is not alarmed
|-
|1
|R
|zone <n> is alarmed

|-

|rowspan="2" |z<n>.bypass.man
|0
|R
|zone <n> is not manually bypassed
|-
|1
|R
|zone <n> is manually bypassed

|-

|rowspan="2" |z<n>.bypass.auto
|0
|R
|zone <n> is not auto bypassed
|-
|1
|R
|zone <n> is auto bypassed

|-

|rowspan="2" |z<n>.bypass
|0
|W
|unbypass zone <n>
|-
|1
|R
|bypass zone <n>

|-

|rowspan="2" |z<n>.latched
|0
|R
|no latched alarm on zone <n>
|-
|1
|R
|latched alarm on zone <n>

|-

|rowspan="2" |z<n>.walk
|0
|R
|zone <n> no walk test
|-
|1
|R
|zone <n> walk tested

|-

|rowspan="2" |z<n>.activity
|0
|R
|no activity required on zone <n>
|-
|1
|R
|activity required on zone <n>

|-

|rowspan="2" |o<n>
|0
|R
|PC controlled output <n> not active
|-
|1
|R
|PC controlled output <n> active

|-

|rowspan="2" |ox<n>
|0
|R
|X-10 controlled output <n> not active
|-
|1
|R
|X-10 controlled output <n> active

|-

|time
|<YY-MM-DD HH:mm>
|R
|date and time set on the panel (e.g. 17-06-29 16:44)

|}

== User Interface ==

=== Hesa Object ===

{{:Hesa_(UI Object)}}

=== UISET Actions ===

{| class="wikitable"
!ID
!Attribute
!colspan="2"|Set to

|-

|log
|value
|colspan="2"|latest security log lines (as many as specified by the 'logsize' option)

|-

|rowspan="2"|connection.online
|rowspan="2"|visible
|true
|when datapoint connection = online
|-
|false
|when datapoint connection = offline

|-

|rowspan="2"|connection.offline
|rowspan="2"|visible
|true
|when datapoint connection = offline
|-
|false
|when datapoint connection = online

|-

|rowspan="2"|<datapoint_id>.1
|rowspan="2"|visible
|true
|when datapoint with ID <datapoint_id> has value '1'
|-
|false
|when datapoint with ID <datapoint_id> has value '0'

|-

|rowspan="2"|<datapoint_id>.0
|rowspan="2"|visible
|true
|when datapoint with ID <datapoint_id> has value '0'
|-
|false
|when datapoint with ID <datapoint_id> has value '1'

|}

=== USER Commands ===

{| class="wikitable"
!Name
!Param
!Action

|-

|rowspan="4" |a<n>.armed
|0
|disarm area <n>
|-
|stay
|arm area <n> in "stay" mode
|-
|away
|arm area <n> in "away" mode
|-
|inst
|arm area <n> in "instantaneous" mode

|-

|a<n>.reset
|1
|reset alarms on area <n>

|-

|rowspan="2" |z<n>.bypassed<br />z<n>d.bypassed
|0
|unbypass zone <n> (base or double)
|-
|1
|bypass zone <n> (base or double)

|-

|rowspan="2" |or
|0
|deactivate the relay output on the panel
|-
|1
|activate the relay output on the panel

|-

|rowspan="2" |oc1
|0
|deactivate the open collector 1 on the panel
|-
|1
|activate the open collector 1 on the panel

|-

|rowspan="2" |oc2
|0
|deactivate the open collector 2 on the panel
|-
|1
|activate the open collector 2 on the panel

|-

|rowspan="2" |o<n>
|0
|deactivate output <n>
|-
|1
|activate output <n>

|}

To perform any of the above operations it is necessary to enter the user code first. To enter the user code through the user interface use [[User|user buttons]] to create a virtual keypad and assign them name and param values according to this table:

{| class="wikitable"
!Name
!Param
!Action
|-
|rowspan="2"|digit
|{0 ... 9}
|append the specified digit to the entered user code
|-
|c
|delete the last entered digit
|}

To visualize the number of entered digits use up to 6 [[Text|text objects]] (depending on the number of digits used for user codes) and set their IDs to:

{| class="wikitable"
!ID
!Description
|-
|pin.<n><br />(0 &le; <n> &le; 5)
|shows the character '*' when the corresponding digit has been entered, shows '_' otherwise

|}

The entered code will be cleared after a short period of inactivity.

== Log Files ==
A permanent detailed record of all the Hesa log messages is saved in a file called security.log in the logs/YYYY directory for the current year. This file is never overwritten or deleted by HSYCO. 

Other information related to the TEXECOM I/O Server are saved in the daily message.log files.

== Release Notes ==

=== 3.6.0 ===
*initial release

----


''Texecom is a registered trademark of Texecom Ltd.''