Difference between revisions of "WXonline"

From HSYCO
Jump to navigation Jump to search
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
This driver provides weather information and forecasts retrieved from the [http://weather.yahoo.com/ Yahoo! Weather service].
+
This driver provides weather information and forecasts retrieved from [https://openweathermap.org/ OpenWeatherMap].
−
 
 
−
{{note | The information provided by this driver must be used in compliance with [http://developer.yahoo.com/weather/#terms Yahoo!'s Terms of Use].}}
 
  
 
[[Category:I/O Server]]
 
[[Category:I/O Server]]
  
 
== HSYCO Configuration ==
 
== HSYCO Configuration ==
−
Add an WXONLINE I/O Server in the [[Settings#I/O Servers|I/O Servers section of the Settings]] and set its parameters.
+
Add a WXONLINE I/O Server in the [[Settings#I/O Servers|I/O Servers section of the Settings]] and set its parameters.
  
 
{{note|Note that the WXONLINE I/O Server doesn't count in the I/O servers license total, so you don't need an extra I/O Server license to use WXONLINE with HSYCO.}}
 
{{note|Note that the WXONLINE I/O Server doesn't count in the I/O servers license total, so you don't need an extra I/O Server license to use WXONLINE with HSYCO.}}
Line 35: Line 33:
 
|pollinterval
 
|pollinterval
 
|10
 
|10
−
|n > 0
+
|n >= 10
 
|the data acquisition interval, in minutes
 
|the data acquisition interval, in minutes
  
Line 42: Line 40:
 
|location
 
|location
 
|
 
|
−
|<woeid>
+
|<id> or <lat>:<lon>
−
|WOEID of the target location
+
|ID of the target location or coordinates
 +
 
 +
|-
 +
 
 +
|key
 +
|
 +
|<key>
 +
|OpenWeatherMap API key
  
 
|}
 
|}
  
−
The 'location' option is required. To obtain the WOEID of the desired location, go to the [http://weather.yahoo.com Yahoo! Weather home page] and enter the location name in the search field. The WOEID will be at the end of the URL for the forecast page for that location. For example, if you search for Los Angeles, the forecast page for that city is <nowiki>"http://weather.yahoo.com/united-states/california/los-angeles-2442047"</nowiki>. The WOEID is 2442047.
+
The 'location' option is required. To obtain the ID of the desired location, look for it [http://bulk.openweathermap.org/sample/city.list.json.gz this list]. Otherwise, you can specify the geographic coordinates of the location using the format "<latitude>:<longitude>" (e.g. "45.461001:9.183567"), with latitude and longitude expressed as decimal degrees.
 +
 
 +
The 'key' option can be obtained [https://home.openweathermap.org/users/sign_up creating an account on OpenWeatherMap]. If this option is not specified, a default API key will be used and the 'pollinterval' option wont't allow for values below 60.
  
 
== Datapoints ==
 
== Datapoints ==
Line 70: Line 77:
 
|-
 
|-
  
−
|rowspan="3" |location
+
|rowspan="2" |location
 
|<location>
 
|<location>
 
|R
 
|R
 
|the target location is set to <location> (e.g. “New York, NY, United States”)
 
|the target location is set to <location> (e.g. “New York, NY, United States”)
 
|-
 
|-
−
|<woeid>
+
|<id> or <lat>:<lon>
−
|W
 
−
|set the location to the specified WOEID
 
−
|-
 
−
|refresh
 
 
|W
 
|W
−
|refresh the weather data for the current location
+
|set the location to the specified value
  
 
|-
 
|-
Line 178: Line 181:
 
|<val>
 
|<val>
 
|R
 
|R
−
|the reported current wind speed corresponds to <val>
+
|the reported current wind speed corresponds to <val> (expressed in Km/h)
  
 
|-
 
|-
Line 190: Line 193:
  
 
|forecast.day.<n>
 
|forecast.day.<n>
−
(<n> = 1 or 2)
+
(<n> = 1 ... 5)
 
|<day>
 
|<day>
 
|R
 
|R
Line 198: Line 201:
  
 
|forecast.temp.low.c.<n>
 
|forecast.temp.low.c.<n>
−
(<n> = 1 or 2)
 
 
|<val>
 
|<val>
 
|R
 
|R
Line 206: Line 208:
  
 
|forecast.temp.low.f.<n>
 
|forecast.temp.low.f.<n>
−
(<n> = 1 or 2)
 
 
|<val>
 
|<val>
 
|R
 
|R
Line 214: Line 215:
  
 
|forecast.temp.high.c.<n>
 
|forecast.temp.high.c.<n>
−
(<n> = 1 or 2)
 
 
|<val>
 
|<val>
 
|R
 
|R
Line 222: Line 222:
  
 
|forecast.temp.high.f.<n>
 
|forecast.temp.high.f.<n>
−
(<n> = 1 or 2)
 
 
|<val>
 
|<val>
 
|R
 
|R
Line 230: Line 229:
  
 
|forecast.condition.<n>
 
|forecast.condition.<n>
−
(<n> = 1 or 2)
 
 
|<condition>
 
|<condition>
 
|R
 
|R
Line 514: Line 512:
  
 
|forecast.day.<n>
 
|forecast.day.<n>
−
(<n> = 1 or 2)
+
(<n> = 1 ... 5)
 
|value
 
|value
 
|colspan="2"|the week day identified by <n> (i.e. “Mon”, “Tue”, “Wed”, ...)
 
|colspan="2"|the week day identified by <n> (i.e. “Mon”, “Tue”, “Wed”, ...)
Line 521: Line 519:
  
 
|forecast.temp.low.c.<n>
 
|forecast.temp.low.c.<n>
−
(<n> = 1 or 2)
 
 
|value
 
|value
 
|colspan="2"|the forecasted lowest temperature for day <n> followed by "°C"
 
|colspan="2"|the forecasted lowest temperature for day <n> followed by "°C"
Line 528: Line 525:
  
 
|forecast.temp.low.c.<n>.nounit
 
|forecast.temp.low.c.<n>.nounit
−
(<n> = 1 or 2)
 
 
|value
 
|value
 
|colspan="2"|the forecasted lowest temperature for day <n> without unit (expressed in °C)
 
|colspan="2"|the forecasted lowest temperature for day <n> without unit (expressed in °C)
Line 536: Line 532:
  
 
|forecast.temp.low.f.<n>
 
|forecast.temp.low.f.<n>
−
(<n> = 1 or 2)
 
 
|value
 
|value
 
|colspan="2"|the forecasted lowest temperature for day <n> followed by "°F"
 
|colspan="2"|the forecasted lowest temperature for day <n> followed by "°F"
Line 543: Line 538:
  
 
|forecast.temp.low.f.<n>.nounit
 
|forecast.temp.low.f.<n>.nounit
−
(<n> = 1 or 2)
 
 
|value
 
|value
 
|colspan="2"|the forecasted lowest temperature for day <n> without unit (expressed in °F)
 
|colspan="2"|the forecasted lowest temperature for day <n> without unit (expressed in °F)
Line 550: Line 544:
  
 
|forecast.temp.high.c.<n>
 
|forecast.temp.high.c.<n>
−
(<n> = 1 or 2)
 
 
|value
 
|value
 
|colspan="2"|the forecasted highest temperature for day <n> followed by "°C"
 
|colspan="2"|the forecasted highest temperature for day <n> followed by "°C"
Line 557: Line 550:
  
 
|forecast.temp.high.c.<n>.nounit
 
|forecast.temp.high.c.<n>.nounit
−
(<n> = 1 or 2)
 
 
|value
 
|value
 
|colspan="2"|the forecasted highest temperature for day <n> without unit (expressed in °C)
 
|colspan="2"|the forecasted highest temperature for day <n> without unit (expressed in °C)
Line 565: Line 557:
  
 
|forecast.temp.high.f.<n>
 
|forecast.temp.high.f.<n>
−
(<n> = 1 or 2)
 
 
|value
 
|value
 
|colspan="2"|the forecasted highest temperature for day <n> followed by "°F"
 
|colspan="2"|the forecasted highest temperature for day <n> followed by "°F"
Line 572: Line 563:
  
 
|forecast.temp.high.f.<n>.nounit
 
|forecast.temp.high.f.<n>.nounit
−
(<n> = 1 or 2)
 
 
|value
 
|value
 
|colspan="2"|the forecasted highest temperature for day <n> without unit (expressed in °F)
 
|colspan="2"|the forecasted highest temperature for day <n> without unit (expressed in °F)
Line 579: Line 569:
  
 
|forecast.condition.<n>
 
|forecast.condition.<n>
−
(<n> = 1 or 2)
 
 
|value
 
|value
 
|colspan="2"|the forecasted weather condition for day <n> (e.g. “SUNNY”)
 
|colspan="2"|the forecasted weather condition for day <n> (e.g. “SUNNY”)
Line 592: Line 581:
  
 
|forecast.condition.<n>.label
 
|forecast.condition.<n>.label
−
(<n> = 1 or 2)
 
 
|img
 
|img
 
|colspan="2"|weather/<forecasted_condition_image>
 
|colspan="2"|weather/<forecasted_condition_image>
Line 795: Line 783:
  
 
== Release Notes ==
 
== Release Notes ==
 +
=== 3.7.0 ===
 +
*data source changed from Yahoo to OpenWeatherMap
 +
*increased number of forecasted days from 2 to 5
 +
*location can be set to latitude and longitude, as well as with the location id
 +
 
=== 3.5.1 ===
 
=== 3.5.1 ===
 
*updated Yahoo API calls (new format required after March 15th, 2016)
 
*updated Yahoo API calls (new format required after March 15th, 2016)
Line 817: Line 810:
  
  
−
''Yahoo! and Yahoo! Weather are registered trademarks of Yahoo! Inc.''
+
''OpenWeatherMap is a registered trademark of OpenWeatherMap, Inc.''

Latest revision as of 09:38, 14 January 2019

This driver provides weather information and forecasts retrieved from OpenWeatherMap.

HSYCO Configuration

Add a WXONLINE I/O Server in the I/O Servers section of the Settings and set its parameters.

Note that the WXONLINE I/O Server doesn't count in the I/O servers license total, so you don't need an extra I/O Server license to use WXONLINE with HSYCO.


High Availability

  • Shutdown when inactive: defaults to true.

Options

ID Default Values Description
gui true true enable support for the UI object and UISET actions
false disable UI support
pollinterval 10 n >= 10 the data acquisition interval, in minutes
location <id> or <lat>:<lon> ID of the target location or coordinates
key <key> OpenWeatherMap API key

The 'location' option is required. To obtain the ID of the desired location, look for it this list. Otherwise, you can specify the geographic coordinates of the location using the format "<latitude>:<longitude>" (e.g. "45.461001:9.183567"), with latitude and longitude expressed as decimal degrees.

The 'key' option can be obtained creating an account on OpenWeatherMap. If this option is not specified, a default API key will be used and the 'pollinterval' option wont't allow for values below 60.

Datapoints

ID Value R/W Description
connection online R connection established
offline R HSYCO can't connect to the panel
location <location> R the target location is set to <location> (e.g. “New York, NY, United States”)
<id> or <lat>:<lon> W set the location to the specified value
condition <condition> R the current weather condition (refer to the conditions table for a complete list of possible values)
condition.clear 1 R the current condition is categorized as “clear”
0 R the current condition is not categorized as “clear”
condition.precipitation 1 R the current condition is categorized as “precipitation”
0 R the current condition is not categorized as “precipitation”
condition.storm 1 R the current condition is categorized as “storm”
0 R the current condition is not categorized as “storm”
condition.partly_cloudy 1 R the current condition is categorized as “partly cloudy”
0 R the current condition is not categorized as "partly cloudy”
condition.low_visibility 1 R the current condition is categorized as “low visibility”
0 R the current condition is not categorized as “low visibility”
temp.c <val> R the reported current temperature corresponds to <val> (expressed in °C)
temp.f <val> R the reported current temperature corresponds to <val> (expressed in °F)
humidity <val> R the reported current humidity percentage corresponds to <val>
pressure <val> R the reported current pressure in inches of mercury (inHg) corresponds to <val>. Multiply by 33.86389 to obtain the equivalent hPa value
wind.speed <val> R the reported current wind speed corresponds to <val> (expressed in Km/h)
wind.dir <val> R the reported current wind direction corresponds to <val> (expressed in degrees)
forecast.day.<n>

(<n> = 1 ... 5)

<day> R the week day identified by <n> corresponds to <day> (i.e. “mon”, "tue", "wed", ...)
forecast.temp.low.c.<n> <val> R the forecasted lowest temperature for day <n> is <val> (expressed in °C)
forecast.temp.low.f.<n> <val> R the forecasted lowest temperature for day <n> is <val> (expressed in °F)
forecast.temp.high.c.<n> <val> R the forecasted highest temperature for day <n> is <val> (expressed in °C)
forecast.temp.high.f.<n> <val> R the forecasted highest temperature for day <n> is <val> (expressed in °F)
forecast.condition.<n> <condition> R the forecasted weather condition for day <n> corresponds to <condition> (refer to the conditions table for a complete list of possible values)
forecast.condition.clear.<n> 1 R the forecasted condition for day <n> is categorized as "clear"
0 R the forecasted condition for day <n> is not categorized as "clear"
forecast.condition.precipitation.<n> 1 R the forecasted condition for day <n> is categorized as "precipitation"
0 R the forecasted condition for day <n> is not categorized as "precipitation"
forecast.condition.storm.<n> 1 R the forecasted condition for day <n> is categorized as "storm"
0 R the forecasted condition for day <n> is not categorized as "storm"
forecast.condition.partly_cloudy.<n> 1 R the forecasted condition for day <n> is categorized as "partly cloudy"
0 R the forecasted condition for day <n> is not categorized as "partly cloudy"
forecast.condition.low_visibility.<n> 1 R the forecasted condition for day <n> is categorized as "low visibility"
0 R the forecasted condition for day <n> is not categorized as "low visibility"

Conditions and categories

The following table shows the possible weather condition values and their categorization.

Categories are used to summarize relevant aspects of a specific condition so to simplify programming logic. The available categories are: clear (c), precipitation (p), storm (s), partly cloudy (pc), and low visibility (lv). For some conditions (e.g. “windy”) the categorization is not feasible; in such cases (denoted by "xx") the category datapoints will not be updated so to maintain the previous condition.

Condition Categories
blowing_snow p, lv
blustery xx
clear_night c
cloudy
cold xx
drizzle p
dust lv
fair_day pc
fair_night pc
foggy lv
freezing_drizzle p
freezing_rain p
hail p
haze lv
heavy_snow p,lv
hot c
hurricane p, s, lv
isolated_thundershowers p, s, lv
isolated_thunderstorms p, s, lv
light_snow_showers p, lv
mixed_rain_hail p
mixed_rain_sleet p
mixed_rain_snow p
mixed_snow_sleet p
mostly_cloudy_day
mostly_cloudy_night
partly_cloudy pc
partly_cloudy_day pc
partly_cloudy_night pc
scattered_showers p, lv
scattered_snow_showers p, lv
scattered_thunderstorms p, s, lv
severe_thunderstorms p, s, lv
showers p, lv
sleet p
smoky lv
snow p
snow_flurries p
snow_showers p, lv
sunny c
thundershowers p, s, lv
thunderstorms p, s, lv
tornado s
tropical_storm p, s, lv
windy xx
unknown xx

User Interface

Weather Object

Shows a weather panel with current conditions and forecast.


UI Object weather.png

Parameters

  • id: the object's ID, used by UISets. Required
  • position: the object's position. Use the pixels or rows and columns coordinates format

Syntax

(weather!<id> <position>)

E.g. 

(weather!wx x10y20)

UISET Actions

ID Attribute Set to
connection.label visible true when datapoint connection = offline
false when datapoint connection = online
location value the target location (e.g. “New York, NY, United States”)
temp.c value the reported current temperature followed by "°C"
temp.c.nounit value the reported current temperature without unit (expressed in °C)
temp.f value the reported current temperature followed by "°F"
temp.f.nounit value the reported current temperature without unit (expressed in °F)
humidity value the reported current humidity percentage
wind.speed value the reported current wind speed in Km/h
wind.speed value the reported current wind direction in degrees
forecast.day.<n>

(<n> = 1 ... 5)

value the week day identified by <n> (i.e. “Mon”, “Tue”, “Wed”, ...)
forecast.temp.low.c.<n> value the forecasted lowest temperature for day <n> followed by "°C"
forecast.temp.low.c.<n>.nounit value the forecasted lowest temperature for day <n> without unit (expressed in °C)


forecast.temp.low.f.<n> value the forecasted lowest temperature for day <n> followed by "°F"
forecast.temp.low.f.<n>.nounit value the forecasted lowest temperature for day <n> without unit (expressed in °F)
forecast.temp.high.c.<n> value the forecasted highest temperature for day <n> followed by "°C"
forecast.temp.high.c.<n>.nounit value the forecasted highest temperature for day <n> without unit (expressed in °C)


forecast.temp.high.f.<n> value the forecasted highest temperature for day <n> followed by "°F"
forecast.temp.high.f.<n>.nounit value the forecasted highest temperature for day <n> without unit (expressed in °F)
forecast.condition.<n> value the forecasted weather condition for day <n> (e.g. “SUNNY”)
condition.label img weather/<current_condition_image>
forecast.condition.<n>.label img weather/<forecasted_condition_image>

Weather conditions images

The following table shows the mapping between each condition and the corresponding image.

To customize the images add a folder named "weather" inside the "img" folder of your project and add your images named accordingly to the table.

Condition Image name Default image
blowing_snow snow.png Wx online snow.png
blustery windy.png Wx online windy.png
clear_night sunny.png Wx online sunny.png
cloudy cloudy.png Wx online cloudy.png
cold icy.png Wx online icy.png
drizzle drizzle.png Wx online drizzle.png
dust dust.png Wx online dust.png
fair_day partly_cloudy.png Wx online partly cloudy.png
fair_night partly_cloudy.png Wx online partly cloudy.png
foggy fog.png Wx online fog.png
freezing_drizzle drizzle.png Wx online drizzle.png
freezing_rain rain.png Wx online rain.png
hail hail.png Wx online hail.png
haze haze.png Wx online haze.png
heavy_snow snow.png Wx online snow.png
hot sunny.png Wx online sunny.png
hurricane storm.png Wx online storm.png
isolated_thundershowers chance_of_storm.png Wx online chance of storm.png
isolated_thunderstorms chance_of_storm.png Wx online chance of storm.png
light_snow_showers snow.png Wx online snow.png
mixed_rain_hail hail.png Wx online hail.png
mixed_rain_sleet snow.png Wx online snow.png
mixed_rain_snow snow.png Wx online snow.png
mixed_snow_sleet snow.png Wx online snow.png
mostly_cloudy_day cloudy.png Wx online cloudy.png
mostly_cloudy_night cloudy.png Wx online cloudy.png
partly_cloudy partly_cloudy.png Wx online partly cloudy.png
partly_cloudy_day partly_cloudy.png Wx online partly cloudy.png
partly_cloudy_night partly_cloudy.png Wx online partly cloudy.png
scattered_showers chance_of_rain.png Wx online chance of rain.png
scattered_snow_showers chance_of_snow.png Wx online chance of snow.png
scattered_thunderstorms chance_of_storm.png Wx online chance of storm.png
severe_thunderstorms storm.png Wx online storm.png
showers rain.png Wx online rain.png
sleet snow.png Wx online snow.png
smoky dust.png Wx online dust.png
snow snow.png Wx online snow.png
snow_flurries snow.png Wx online snow.png
snow_showers snow.png Wx online snow.png
sunny sunny.png Wx online sunny.png
thundershowers storm.png Wx online storm.png
thunderstorms storm.png Wx online storm.png
tornado tornado.png Wx online tornado.png
tropical_storm storm.png Wx online storm.png
windy windy.png Wx online windy.png
unknown unknown_weather_condition.png

Release Notes

3.7.0

  • data source changed from Yahoo to OpenWeatherMap
  • increased number of forecasted days from 2 to 5
  • location can be set to latitude and longitude, as well as with the location id

3.5.1

  • updated Yahoo API calls (new format required after March 15th, 2016)

3.4.0

  • fixed Fahrenheit to Celsius conversion

3.1.1

  • pressure datapoint added

3.1.0

  • changed weather provider
  • modified I/O Datapoints
  • modified I/O Server options

3.0.1

  • added weather object

3.0.0

  • initial release


OpenWeatherMap is a registered trademark of OpenWeatherMap, Inc.

Retrieved from "https://wiki.hsyco.com/3.7/index.php?title=WXonline&oldid=7642"