Difference between revisions of "IonoPiMax"

From HSYCO
Jump to navigation Jump to search
(Created page with "[http://www.sferalabs.cc/iono-pi-max/ Iono Pi Max] is an extremely versatile industrial server with a huge variety of Input/Output lines and standard communication interfaces,...")
 
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[http://www.sferalabs.cc/iono-pi-max/ Iono Pi Max] is an extremely versatile industrial server with a huge variety of Input/Output lines and standard communication interfaces, all routed to the incredibly powerful quad-core processor of the Raspberry Pi.
 
[http://www.sferalabs.cc/iono-pi-max/ Iono Pi Max] is an extremely versatile industrial server with a huge variety of Input/Output lines and standard communication interfaces, all routed to the incredibly powerful quad-core processor of the Raspberry Pi.
  
−
[[File:iono_pi_module_board.png|200px|thumb|iono Pi]]
+
[[File:Iono-pi-max-1.png|200px|thumb|Iono Pi Max]]
  
−
This driver provides support for a local installation of HSYCO on Iono Pi Max itself.
+
This driver provides support for a local installation of HSYCO on Iono Pi Max itself. The Raspberry Pi OS Kernel module for Iono Pi Max must be installed. The kernel module documentation is available at [https://github.com/sfera-labs/iono-pi-max-kernel-module GitHub] and the Iono Pi Max [https://www.sferalabs.cc/files/ionopimax/doc/ionopimax-user-guide.pdf User Guide].
  
  
Line 9: Line 9:
  
 
== HSYCO Configuration ==
 
== HSYCO Configuration ==
−
Add a IONO Pi I/O Server in the [[Settings#I/O Servers|I/O Servers section of the Settings]] and set its parameters:
+
Add a IONO Pi Max I/O Server in the [[Settings#I/O Servers|I/O Servers section of the Settings]] and set its parameters:
  
−
{{note|Note that the IONO Pi I/O Server doesn't count in the I/O servers license total, so you don't need an extra I/O Server license to use IONO Pi with HSYCO.}}
+
{{note|Note that the IONO Pi Max I/O Server doesn't count in the I/O servers license total, so you don't need an extra I/O Server license to use IONO Pi Max with HSYCO.}}
−
 
 
−
=== Communication ===
 
−
*'''IP Address''': the IP address assigned to Iono Pi, leave blank for a local installation;
 
−
*'''Port''': TCP port configured on Iono Pi, leave blank for a local installation;
 
  
 
=== High Availability ===
 
=== High Availability ===
Line 31: Line 27:
  
 
|rowspan="2"|startupevents
 
|rowspan="2"|startupevents
−
|rowspan="2"|true
+
|rowspan="2"|false
 
|true
 
|true
 
|generate IO events also during the driver’s start-up phase
 
|generate IO events also during the driver’s start-up phase
Line 40: Line 36:
 
|-
 
|-
  
−
|rowspan="2"|wiegandbits
+
|pollinterval
−
|rowspan="2"|false
+
|250
−
|true
+
|10 <= n <= 30000
−
|the wiegand datapoints report bits count and data value
+
|the data acquisition interval, in milliseconds
−
|-
 
−
|false
 
−
|the wiegand datapoints report the data value only
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="2"|https
 
−
|rowspan="2"|false
 
−
|true
 
−
|use HTTPS to communicate with a remote Iono Pi
 
−
|-
 
−
|false
 
−
|use HTTP to communicate with a remote Iono Pi
 
−
 
 
−
|-
 
−
 
 
−
|readinterval
 
−
|2000
 
−
|<ms>
 
−
|For local installation only. Interval, in milliseconds, between subsequent readings of analog inputs and 1-Wire devices. If the value is set below 2000 (i.e. less than 2 seconds) the specified interval is only applied to analog inputs; 1-Wire devices will be polled with a 2 seconds interval. Set to 0 to disable analog inputs polling
 
−
 
 
−
|-
 
−
 
 
−
|analogminvariation
 
−
|100
 
−
|<mV>
 
−
|For local installation only. Minimum voltage variation (in millivolts) to be measured on analog inputs, after an event has been triggered, for a new one to occur. Defaults to 0
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="2"|digitalinputs
 
−
|rowspan="2"|true
 
−
|true
 
−
|For local installation only. Enable digital inputs monitoring
 
−
|-
 
−
|false
 
−
|For local installation only. Disable digital inputs monitoring
 
−
 
 
−
|-
 
−
 
 
−
|digitaldebounce
 
−
|30
 
−
|<ms>
 
−
|For local installation only. Time, in milliseconds, required for digital inputs to maintain a value, after a variation, before an event is triggered
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="2"|wiegand1
 
−
|rowspan="2"|false
 
−
|true
 
−
|For local installation only. Enable and monitor Wiegand interface 1
 
−
|-
 
−
|false
 
−
|For local installation only. Disable Wiegand interface 1
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="2"|wiegand2
 
−
|rowspan="2"|false
 
−
|true
 
−
|For local installation only. Enable and monitor Wiegand interface 2
 
−
|-
 
−
|false
 
−
|For local installation only. Disable Wiegand interface 2
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="3"|onewirebus
 
−
|rowspan="3"|
 
−
|true
 
−
|For local installation only. Enable reading of the 1-Wire bus devices connected on TTL1
 
−
|-
 
−
|false
 
−
|For local installation only. Disable reading of the 1-Wire bus devices connected on TTL1
 
−
|-
 
−
|
 
−
|If not specified the monitoring will be enabled if the 1-Wire interface is enabled in the Raspberry Pi OS configuration
 
  
 
|}
 
|}
Line 126: Line 45:
 
== Datapoints ==
 
== Datapoints ==
  
−
{| class="wikitable"
+
The Iono Pi Max implements all data points provided by the underlying Iono Pi Max kernel module. Refer to the documentation is available at [https://github.com/sfera-labs/iono-pi-max-kernel-module GitHub].
−
!ID
 
−
!Value
 
−
!R/W
 
−
!Description
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="2" |connection
 
−
|online
 
−
|R
 
−
|connection established
 
−
|-
 
−
|offline
 
−
|R
 
−
|HSYCO can't connect to the device
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="3" |driverstate
 
−
|init
 
−
|R
 
−
|Sfera driver is initializing
 
−
|-
 
−
|quit
 
−
|R
 
−
|Sfera driver quit
 
−
|-
 
−
|running
 
−
|R
 
−
|Sfera driver is running (normal state)
 
  
−
|-
+
Each readable file name exposed by the kernel module under the /sys/class/ionopimax/ sub-directories appears as a data point with id <subdir>.<file>. For example, as the buzzer's status file is /sys/class/ionopimax/buzzer/status, the corresponding data point is "buzzer.status".
−
 
 
−
|rowspan="4" |led
 
−
|rowspan="2" |0
 
−
|R
 
−
|LED L1 is off
 
−
|-
 
−
|W
 
−
|turn LED L1 off
 
−
|-
 
−
|rowspan="2" |1
 
−
|R
 
−
|LED L1 is on
 
−
|-
 
−
|W
 
−
|turn LED L1 on
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="4" |o<1-4>
 
−
|rowspan="2" |0
 
−
|R
 
−
|relay <1-4> is off
 
−
|-
 
−
|W
 
−
|switch off relay <1-4>
 
−
|-
 
−
|rowspan="2" |1
 
−
|R
 
−
|relay <1-4> is on
 
−
|-
 
−
|W
 
−
|switch on relay <1-4>
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="4" |oc<1-3>
 
−
|rowspan="2" |0
 
−
|R
 
−
|open collector output <1-3> is off (not grounded)
 
−
|-
 
−
|W
 
−
|switch off open collector output <1-3>
 
−
|-
 
−
|rowspan="2" |1
 
−
|R
 
−
|open collector output <1-3> is on (grounded)
 
−
|-
 
−
|W
 
−
|switch on open collector output <1-3>
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="2" |di<1-6>
 
−
|0
 
−
|R
 
−
|digital input <1-6> is low
 
−
|-
 
−
|1
 
−
|R
 
−
|digital input <1-6> is high
 
−
 
 
−
|-
 
−
 
 
−
|ai<1-4>
 
−
|<val>
 
−
|R
 
−
|analog input <1-4> is reading a voltage equal to <val> (in Volts)
 
−
 
 
−
|-
 
−
 
 
−
|rowspan="2" |wiegand.<1-2>
 
−
|<val>
 
−
|R
 
−
|if option "wiegandbits" set to false. Value as an unsigned integer in base 16 (hex) read on the specified Wiegand interface (e.g. "2c646a2")
 
−
|-
 
−
|<bits>/<val>
 
−
|R
 
−
|if option "wiegandbits" set to true. Number of bits and value (hex) read on the specified Wiegand interface (e.g. "26/2c646a2")
 
−
 
 
−
|-
 
−
 
 
−
|onewire.bus.<id>
 
−
|<val>
 
−
|R
 
−
|1-Wire device <id> value
 
−
 
 
−
|}
 
  
−
== User Interface ==
+
Command files that are marked as write only in the documentation (W), are not shown as visible data points in HSYCO, but can be used in the IO events action or ioSet() methods to send a command.
  
−
To control a digital output (O1 ... O4, OC1 ... OC3, LED), add a [[button]] or a [[buttonicon]] object to your project page and set its address field to the corresponding datapoint:
+
For example, if "max" is the id assigned to the Iono Pi Max I/O Server, then:
 +
TIME : IO max.buzzer.beep = 1000
 +
will make the buzzer beep for 1 second (1000 ms).
  
−
[[File:IonoPi_UI_Button.png|500px|border]]
+
Note that "max.buzzer.beep" is not visible in the Status Browser and doesn't generate events, because it is write only, and only the "max.buzzer.status" data point will be visible, with a value of 0 if the buzzer is not active, or 1 if active.
  
 
== Release Notes ==
 
== Release Notes ==

Latest revision as of 15:41, 1 October 2020

Iono Pi Max is an extremely versatile industrial server with a huge variety of Input/Output lines and standard communication interfaces, all routed to the incredibly powerful quad-core processor of the Raspberry Pi.

Iono Pi Max

This driver provides support for a local installation of HSYCO on Iono Pi Max itself. The Raspberry Pi OS Kernel module for Iono Pi Max must be installed. The kernel module documentation is available at GitHub and the Iono Pi Max User Guide.

HSYCO Configuration

Add a IONO Pi Max I/O Server in the I/O Servers section of the Settings and set its parameters:

Note that the IONO Pi Max I/O Server doesn't count in the I/O servers license total, so you don't need an extra I/O Server license to use IONO Pi Max with HSYCO.


High Availability

  • Shutdown when inactive: defaults to false.

Options

ID Default Values Description
startupevents false true generate IO events also during the driver’s start-up phase
false start generating events only after HSYCO is aligned with the current status of the system
pollinterval 250 10 <= n <= 30000 the data acquisition interval, in milliseconds

Datapoints

The Iono Pi Max implements all data points provided by the underlying Iono Pi Max kernel module. Refer to the documentation is available at GitHub.

Each readable file name exposed by the kernel module under the /sys/class/ionopimax/ sub-directories appears as a data point with id <subdir>.<file>. For example, as the buzzer's status file is /sys/class/ionopimax/buzzer/status, the corresponding data point is "buzzer.status".

Command files that are marked as write only in the documentation (W), are not shown as visible data points in HSYCO, but can be used in the IO events action or ioSet() methods to send a command.

For example, if "max" is the id assigned to the Iono Pi Max I/O Server, then: 

TIME : IO max.buzzer.beep = 1000

will make the buzzer beep for 1 second (1000 ms).

Note that "max.buzzer.beep" is not visible in the Status Browser and doesn't generate events, because it is write only, and only the "max.buzzer.status" data point will be visible, with a value of 0 if the buzzer is not active, or 1 if active.

Release Notes

3.7.0

  • initial release


Iono Pi Max is a registered trademark of Sfera Labs Srl

Retrieved from "https://wiki.hsyco.com/3.7/index.php?title=IonoPiMax&oldid=9034"