Difference between revisions of "Kilsen"

From HSYCO
Jump to navigation Jump to search
Line 8: Line 8:
  
 
KILSEN panels can be connected via ethernet. A valid IP address must be assigned to the panel. MODBUS PROTOCOL must be enabled. Please refer to the manual for detailed instruction about MODBUS protocol configuration.
 
KILSEN panels can be connected via ethernet. A valid IP address must be assigned to the panel. MODBUS PROTOCOL must be enabled. Please refer to the manual for detailed instruction about MODBUS protocol configuration.
 +
 +
== HSYCO Configuration ==
 +
 +
Add a KILSEN I/O Server in the [[Settings#I/O Servers|I/O Servers section of the Settings]] and set its parameters:
 +
 +
=== Communication ===
 +
*'''Comm ID''': select a MODBUSTCP I/O server if using a Modbus gateway, or the serial port id when using a direct RS-485 port with HSYCO acting as Modbus RTU master.
 +
 +
=== High Availability ===
 +
*'''Shutdown when inactive''': defaults to false.
 +
 +
=== Options ===
 +
 +
{| class="wikitable"
 +
!ID
 +
!Default
 +
!Values
 +
!Description
 +
|-
 +
 +
|address
 +
|1
 +
|1 ... 32
 +
|the panel’s Modbus address
 +
|-
 +
 +
|rowspan="2"|gui
 +
|rowspan="2"|true
 +
|true
 +
|enable support for the UI object, UISET actions and USER commands
 +
|-
 +
|false
 +
|disable UI support
 +
|-
 +
 +
|rowspan="2"|startupevents
 +
|rowspan="2"|false
 +
|true
 +
|generate IO events also during the driver’s start-up phase
 +
|-
 +
|false
 +
|start generating events only after HSYCO is aligned with the current status of the system
 +
|-
 +
 +
|pollinterval
 +
|1
 +
|> 0
 +
|the data acquisition interval, in seconds
 +
 +
|-
 +
 +
|lastzone
 +
|150
 +
|style="white-space:nowrap"|0 ... 150
 +
|set to the highest zone number configured in the panel. Set to 0 to disable zone status polling and control commands
 +
|-
 +
 +
|loglines
 +
|100
 +
|≥ 0
 +
|if GUI support is enabled, set to the maximum number of lines to show in the log text object. Set to 0 to disable the GUI log
 +
|-
 +
 +
|rowspan="2"|protocolversion
 +
|rowspan="2"|2
 +
|1
 +
|set this option to 1 only if the panel is using the old firmware
 +
|-
 +
|2
 +
|default protocol support for panels with new firmware (N models)
 +
|-
 +
 +
|}

Revision as of 08:16, 19 April 2019

KILSEN KFP-A are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation P/N 00-3243-505-1603-01 • ISS 14DEC15

IO Server Kilsen Panel.jpg

Communication

KILSEN panels can be connected via ethernet. A valid IP address must be assigned to the panel. MODBUS PROTOCOL must be enabled. Please refer to the manual for detailed instruction about MODBUS protocol configuration.

HSYCO Configuration

Add a KILSEN I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

  • Comm ID: select a MODBUSTCP I/O server if using a Modbus gateway, or the serial port id when using a direct RS-485 port with HSYCO acting as Modbus RTU master.

High Availability

  • Shutdown when inactive: defaults to false.

Options

ID Default Values Description
address 1 1 ... 32 the panel’s Modbus address
gui true true enable support for the UI object, UISET actions and USER commands
false disable UI support
startupevents false true generate IO events also during the driver’s start-up phase
false start generating events only after HSYCO is aligned with the current status of the system
pollinterval 1 > 0 the data acquisition interval, in seconds
lastzone 150 0 ... 150 set to the highest zone number configured in the panel. Set to 0 to disable zone status polling and control commands
loglines 100 ≥ 0 if GUI support is enabled, set to the maximum number of lines to show in the log text object. Set to 0 to disable the GUI log
protocolversion 2 1 set this option to 1 only if the panel is using the old firmware
2 default protocol support for panels with new firmware (N models)