Teledata

Teledata TeledataONE and MiniONE are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection using Teledata ONEconnect as gateway. ONEconnect gateway must be configured in Gateway / Printer Mode. This driver was developed following the MODBUS documentation "Documento Interfacciamento Modbus Antincendio Rev. 2.1"

  This driver could handle 12 panels each one with 16 loops of 240 sensors. This I/O server can be slow in case of high amount of loops, sensors, modules. To partially solve the issue this I/O servers has a double polling implementation: fast polling for global status, slow polling for sensors status. This means that the global panel status is requested more frequently. For example in case of fire alarm the global alarm will be approximately notified within 3 seconds or less, the specific sensor alarm will be notified later, with a delay proportional to the numbers of loop, sensors, modules declared in the driver's options.

HSYCO Configuration

Add a TELEDATA I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

• Address: IP address of the TELEDATA ONEconnect gateway
• Port: TCP/IP port for MODBUS communication (default 502)

High Availability

• Shutdown when inactive: defaults to false.

Options

ID	Default	Values	Description
gui	true	true	enable support for the UI object, UISET actions and USER commands
		false	disable UI support
startupevents	false	true	generate IO events also during the driver’s start-up phase
		false	start generating events only after HSYCO is aligned with the current status of the system
unitid	1	> 0	MODBUS unit ID of the KILSEN panel
nodes	1		nodes list. Multiple nodes should be separated by semicolons
loopsnumber	1	> 0	total number of loops
sensorsnsumber	1	0 ... 128	set to the highest sensor number configured in the panel
modulesnumber	1	0 ... 128	set to the highest module number configured in the panel