AvigilonWEB

Avigilon Control Center (ACC) 7 is a video management software that can be integrated in HSYCO with a TCP/IP connection. The current release of the I/O Server has been tested with the Avigilon Control Center WebEndpoint

 This driver supports only a single connection with an Avigilon Control Server. If you have multiple Avigilon Control Servers it is mandatory to add more I/O servers to HSYCO, one for each Avigilon Control Server. Every I/O server must use a different IP address and TCP/IP port.

Communication

Here's an example of how to configure Avigilon Control Center using WebEndpoint to send an alarm status to HSYCO.

Download the Avigilon WebEndpoint executable from the Avigilon download page

Creating an alarm

Create a new alarm in ACC

Select your camera as the trigger source

Select your camera as the linked device

Select the users that should be notified by ACC

Select the alarm acknowledgment action

Give the alarm a lowercase name  only use characters from the english alphabet, don't use spaces, the only special characters allowed are - _

Creating a Motion Detection

Setup a new motion detection under your camera

HSYCO Configuration

Add an AVIGILON I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

• IP Address: IP address of the AVIGILON ACC 7 server. Set to 0.0.0.0 to allow any remote IP address to connect.
• IP Port: TCP/IP port to use, leave blank to use default port 10001

High Availability

• Shutdown when inactive: defaults to false.

Datapoints

ID	Value	R/W	Description
connection	online	R	HSYCO connection socket is open
	offline	R	HSYCO cannot create the connection socket
write	value	W	write the message <value> on the connection socket