TSECMACS

The TSEC MACS MACS is a perimeter anti-intrusion system for rigid and semi-rigid metal fences.

HSYCO Configuration

Add the TSECMACS I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

• IP Address: host name or IP address of the panel
• IP Port: TCP/IP port assigned to the panel's web server

Authentication

• Username: username to access the web server
• Password: password to access the web server

Options

ID	Default	Values	Description
startupevents	false	true	generate IO events also during the driver’s start-up phase
		false	start generating events only after HSYCO is aligned with the current status of the system
gui	false	true
		false
pollinterval	1000	n >= 1000	the data acquisition interval, in milliseconds

Datapoints

Utility Datapoints

ID	Value	R/W	Description
connection	online	R	connection established
	offline	R	HSYCO can't connect to the sensor
sensor.<n>.isenabled	1	R/W	The sensor is enabled
	0	R/W	The sensor is NOT enabled
sensor.<n>.zoneid	<value>	R	Returns the zone id of the sensor
zone.<m>.name	<value>	R	Returns the zone name
zone.<m>.outputid	<value>	R	Returns the zone output id

Alarms Datapoints

Zones

ID	Value	R/W	Description
alarm	0/1	R	This datapoint will return 1 if just one sensor or zone is in alarm
zone.<n>.alarm.cumulative	0/1	R	Returns 1 if just one alarm is on for the requested zone
zone.<n>.alarm.accelerometer.fault	0/1	R	Accelerometer fault alarm
zone.<n>.alarm.bus.fault	0/1	R	Bus fault alarm
zone.<n>.alarm.climbing.alarm	0/1	R	Climbing alarm
zone.<n>.alarm.climbing.prealarm	0/1	R	Climbing pre alarm
zone.<n>.alarm.communication.mas-eth.lost	0/1	R	Communication to the mas-eth lost alarm
zone.<n>.alarm.communication.security.problem	0/1	R	Generic communication security problem alarm
zone.<n>.alarm.communication.with.sensor.failed	0/1	R	Communication with sensor failed alarm
zone.<n>.alarm.configuration.in.progress	0/1	R	Configuration in progress alarm
zone.<n>.alarm.consistency.error	0/1	R	Consistency error alarm
zone.<n>.alarm.cut.alarm	0/1	R	Cut alarm
zone.<n>.alarm.cut.prealarm	0/1	R	Cut pre alarm
zone.<n>.alarm.error.writing.parameters.on.sensor	0/1	R	Error writing parameters on sensor alarm
zone.<n>.alarm.magnetic.attack.alarm	0/1	R	Magnetic attack alarm
zone.<n>.alarm.persistent.perturbation.alarm	0/1	R	Persistent perturbation alarm
zone.<n>.alarm.persistent.perturbation.prealarm	0/1	R	Persistent perturbation pre alarm
zone.<n>.alarm.power.supply.problems	0/1	R	Power supply problems alarm
zone.<n>.alarm.remove.alarm	0/1	R	remove alarm
zone.<n>.alarm.remove.alarm	0/1	R	Returns 1 if the alarm is removed
zone.<n>.alarm.sd.card.not.inserted.or.damaged	0/1	R	SD card not inserted or damaged alarm
zone.<n>.alarm.sensor.fault	0/1	R	Sensor fault alarm
zone.<n>.alarm.sensor.not.found	0/1	R	Sensor not found alarm
zone.<n>.alarm.sporadic.cut.alarm	0/1	R	Sporadic cut alarm
zone.<n>.alarm.sporadic.cut.prealarm	0/1	R	Sporadic cut pre alarm
zone.<n>.alarm.tamper.mas	0/1	R	Tamper mas alarm
zone.<n>.zone.or.output.not.use	0/1	R	Zone or output not use alarm