Cle

CLE is an I/O servers that allows the supervision of CLE automation hotel management modules.

This driver complies with the Xcom communication protocol

This is the complete list of supported modules:

Thermostats	(various models, articles MCT5, MCT6, MCU5, MCU6) installed as TermoA and B
Internal pocket	(article MTS3) installed as MTS A and MTS B
External out of the door reader	(article MFP, PRX) or integrated on the control panel
Wireless receivers	article WRX only presence
Safe	CSF only presence

Communication

The driver supports communication through RS-485 serial interface.

RS-485 parameters:

Baud rate	<19200-57600>
Data bits	8
Stop bit	1
Parity	none
Flow control	none

Datapoints

ID	INDEX	R/W	VALUE	VALUE MEANING	INFO (ITA)	INFO (ENG)
cle.<addr>.digital.output.<x>.value	<x>: 1..8	W	Val: 0,1		Controlla uscita digitale X	Check digital output X
cle.<addr>.digital.input.reset		W	Val: 1	1 = reset	Resetta tutti gli ingressi digitali	Reset all digital inputs
cle.<addr>.digital.input.<x>.reset	<x>: 1..8	W	Val: 1	1 = reset	Resetta ingressi digitali X	Reset digital input X
cle.<addr>.settings.reset		W	Val: 1	1 = reset	Resetta impostazioni plugin	Reset plugin settings
cle.<addr>.digital.input.<x>.name	<x>: 1..8	W	Val: string		Cambia il nome all’ingresso digitale	Change name of digital input
cle.<addr>.digital.output.<x>.name	<x>: 1..8	W	Val: string		Cambia il nome all’uscita	Change name of output
cle.<addr>.<mct>.name	<mct>: mcta,mctb	W	Val: string		Cambia il nome al termostato	Change name of thermostat
cle.<addr>.<mct>.season	<mct>: mcta,mctb	W	Val: summer, winter		Modifica stagione termostato	Modify thermostat season
cle.<addr>.<mct>.temp.anti.freeze	<mct>: mcta,mctb	W	Val: integer		Modifica setpoint antigelo	Modify anti-freeze setpoint
cle.<addr>.<mct>.temp.comfort	<mct>: mcta,mctb	W	Val: integer		Modifica setpoint comfort	Modify comfort setpoint
cle.<addr>.<mct>.temp.maintenance	<mct>: mcta,mctb	W	Val: integer		Modifica setpoint manutenzione	Modify maintenance setpoint
cle.<addr>.<mct>.temp.maintenance.max	<mct>: mcta,mctb	W	Val: integer		Modifica setpoint max manutenzione	Modify max maintenance setpoint
cle.<addr>.<mct>.temp.max	<mct>: mcta,mctb	W	Val: integer		Modifica setpoint max	Modify max setpoint
cle.<addr>.<mct>.temp.min	<mct>: mcta,mctb	W	Val: integer		Modifica setpoint min	Modify min setpoint
cle.<addr>.<mct>.flag.maintenance.or.comfort	<mct>: mcta,mctb	W	Val: maintenance, comfort		Imposta MCT in manutenzione o comfort	Set MCT to maintenance or comfort
cle.<addr>.online		R	Val: 0,1	1=online	Stato connessione bus	Bus connection status
cle.<addr>.aux.digital.input.<x>.disabled	<x>: 1..8	R	Val: 0,1	1=disabled
cle.<addr>.card.<number>.enabled		R			Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.card.new.code		R			Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.card.new.enable		R			Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.date.time.byte.data		R			Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.date.time.day		R			Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.date.time.daylight.savings.time		R			Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.date.time.error		R			Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.date.time.hour		R	Val:0..23		Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.date.time.minute		R	Val:1.59		Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.date.time.month		R	Val:1..12		Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.date.time.second		R	Val:1.59		Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.date.time.week.day		R	Val:1..7		Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.date.time.year		R	Val:last two digits of current year		Usati da plugin, non usare	Used by plugin, do not use
cle.<addr>.digital.input.<x>.normally.open	<x>: 1..8	R	Val: 0,1	1=NA	Se l’ingresso digitale X è normalmente aperto	If digital input X is normally open
cle.<addr>.digital.input.<x>.retentive	<x>: 1..8	R	Val: 0,1	1=latching	Se l’ingresso digitale X è ritentivo	Digital input X status is latching
cle.<addr>.digital.input.<x>.value	<x>: 1..8	R	Val: 0,1	1=close	Stato dell’ingresso digitale X	Indicate if output X is linked to digital input Y
cle.<addr>.digital.output.<x>.bind.di<y>	<x>: 1..8 - <y>: 1..8	R	Val: 0,1	1=binded	Indica se l’uscita X è legata all’ingresso digitale Y
cle.<addr>.digital.output.<x>.bind.virtual.input.incma	<x>: 1..8	R	Val: 0,1	1=binded	Indica se l’uscita X è legata alll’input virtuale incma	Indicate if output X is linked to virtual input incma
cle.<addr>.digital.output.<x>.bind.virtual.input.incmb	<x>: 1..8	R	Val: 0,1	1=binded	Indica se l’uscita X è legata alll’input virtuale incmb	Indicate if output X is linked to virtual input incmb
cle.<addr>.digital.output.<x>.disabled	<x>: 1..8	R	Val: 0,1	1=disabled	Uscita X disabilitata	Output X disabled
cle.<addr>.digital.output.<x>.inputs.mode	<x>: 1..8	R	Val: and,or
cle.<addr>.digital.output.<x>.normally.open	<x>: 1..8	R	Val: 0,1	1=NA	Uscita X normalmente aperta	Output X normally open
cle.<addr>.digital.output.<x>.type	<x>: 1..8	R	Val: timerized,monostable,bistable		Tipo dell’uscita X	Type of output X
cle.<addr>.digital.output.<x>.value	<x>: 1..8	R	Val: 0,1	1=close	Stato dell’uscita X	Status of output X
cle.<addr>.esxj4r_a.exists		R	Val: 0,1	1=exists
cle.<addr>.esxj4r_a.offline		R	Val: 0,1	1=offline
cle.<addr>.esxj4r_b.exists		R	Val: 0,1	1=exists
cle.<addr>.esxj4r_b.offline		R	Val: 0,1	1=offline
cle.<addr>.esxj4r_c.exists		R	Val: 0,1	1=exists
cle.<addr>.esxj4r_c.offline		R	Val: 0,1	1=offline
cle.<addr>.esxy4.exists		R	Val: 0,1	1=exists
cle.<addr>.esxy4.offline		R	Val: 0,1	1=offline
cle.<addr>.firmware.name		R	Val: string		Nome del firmware installato sul modulo hotel	Firmware name installed on hotel module
cle.<addr>.firmware.release		R	Val: string		Release del firmware installato sul modulo hotel	Firmware release installed on hotel module
cle.<addr>.firmware.version		R	Val: string		Versione del firmware installato sul modulo hotel	Firmware version installed on hotel module
cle.<addr>.function.anti.intrusion.insertion		R	Val: manual,automatc
cle.<addr>.function.anti.theft.active		R	Val: 0,1	1=active	Stato antifurto	Anti-theft status
cle.<addr>.function.call.cleaner.active		R	Val: 0,1	1=active	Stato chiamata pulizia camera	Housekeeping call status
cle.<addr>.function.dbk.active		R	Val: 0,1
cle.<addr>.function.door.open.without.card.in.pouch.active		R	Val: 0,1	1=active	Porta camera aperta e tessera non presente nella tasca	Room door open and keycard not present
cle.<addr>.function.fc8.active		R	Val: 0,1
cle.<addr>.function.intrusion.alarm.active		R	Val: 0,1
cle.<addr>.function.maintenance.request.active		R	Val: 0,1	1=active	Allarme antifurto	Alarm activated
cle.<addr>.function.not.disturb.active		R	Val: 0,1	1=active	Do not Disturb attivato	Do Not Disturb mode activated
cle.<addr>.function.pouch.input.simulation.active		R	Val: 0,1	1=active	Simulazione ingresso tasca attivato	"Pocket entry simulation activated
cle.<addr>.function.programming.authorization.active		R	Val: 0,1
cle.<addr>.function.room.checked.and.ready.active		R	Val: 0,1	1=active	Stanza pronta e effettuato check-in	Room ready and check-in done
cle.<addr>.function.room.checked.not.ready.active		R	Val: 0,1	1=active	Stanza non pronta	Room not ready
cle.<addr>.function.room.cleaning.request.active		R	Val: 0,1	1=active	Richiesta pulizia camera attiva	Housekeeping request active
cle.<addr>.function.room.maintance.done.and.ready.active		R	Val: 0,1	1=active	Manutenzione camera effettuata	Room maintenance done
cle.<addr>.function.room.maintance.done.not.ready.active		R	Val: 0,1	1=active	Manutenzione camera non effettuata	Room maintenance not done
cle.<addr>.function.room.ready.active		R	Val: 0,1	1=active	Stanza pronta	Room ready
cle.<addr>.function.serial.bus.alarm.simulation.active		R	Val: 0,1	1=active	Simulazione allarme sul bus seriale	Serial bus alarm simulation activated
cle.<addr>.function.sos.active		R	Val: 0,1	1=active	Funzione SOS attivata	SOS function activated
cle.<addr>.function.st43.active		R	Val: 0,1	1=active
cle.<addr>.function.st44.active		R	Val: 0,1	1=active
cle.<addr>.function.stac.active		R	Val: 0,1	1=active
cle.<addr>.function.stad.active		R	Val: 0,1	1=active
cle.<addr>.function.starc.active		R	Val: 0,1	1=active
cle.<addr>.function.stard.active		R	Val: 0,1	1=active
cle.<addr>.function.stc.active		R	Val: 0,1	1=active
cle.<addr>.function.std.active		R	Val: 0,1	1=active
cle.<addr>.function.wd43.active		R	Val: 0,1	1=active
cle.<addr>.function.wd44.active		R	Val: 0,1	1=active
cle.<addr>.function.wdc.active		R	Val: 0,1	1=active
cle.<addr>.function.wdd.active		R	Val: 0,1	1=active
cle.<addr>.mcb.exists		R	Val: 0,1	1=exists	MCB esiste	MCB exists
cle.<addr>.mcb.offline		R	Val: 0,1	1=offline	MCB offline	MCB offline
cle.<addr>.<mct>.exists	<mct>: mcta,mctb	R	Val: 0,1	1=esiste	MCT esiste	MCT exists
cle.<addr>.<mct>.fancoil.speed	<mct>: mcta,mctb	R	Val: automatic, off or number		Modo fancoil	Fan coil mode
cle.<addr>.<mct>.flag.actuator.work.mode	<mct>: mcta,mctb	R	Val: remoteoff,localoff,aautomatic,chrono		Velocità fancoil	Fan coil speed
cle.<addr>.<mct>.flag.auto.summer.winter.commutation	<mct>: mcta,mctb	R	Val: 0,1	1=automatic	Commutazione estate inverno automatica	Automatic summer/winter switch
cle.<addr>.<mct>.flag.datetime.error	<mct>: mcta,mctb	R	Val: 0,1	1=error	Errore data	Date error
cle.<addr>.<mct>.flag.display.intensity.included	<mct>: mcta,mctb	R	Val: 0,1
cle.<addr>.<mct>.flag.electrovalve.work.mode	<mct>: mcta,mctb	R	Val: regular,setpoint
cle.<addr>.<mct>.flag.external.sensor.fault	<mct>: mcta,mctb	R	Val: 0,1	1=error	Errore sensore temperatura esterno	External temperature sensor error
cle.<addr>.<mct>.flag.external.sensor.temp.anomaly	<mct>: mcta,mctb	R	Val: 0,1	1=error	Anomalia sensore temperatura esterno	External temperature sensor anomaly
cle.<addr>.<mct>.flag.fahrenheit.or.celsius	<mct>: mcta,mctb	R	Val:fahrenheit,celsius
cle.<addr>.<mct>.flag.internal.sensor.fault	<mct>: mcta,mctb	R	Val: 0,1		Errore sensore temperatura interno	Internal temperature sensor error
cle.<addr>.<mct>.flag.internal.sensor.temp.anomaly	<mct>: mcta,mctb	R	Val: 0,1		Anomalia sensore temperatura interno	Internal temperature sensor anomaly
cle.<addr>.<mct>.flag.ir.input.function.b.enabled	<mct>: mcta,mctb	R	Val: 0,1
cle.<addr>.<mct>.flag.ir.status	<mct>: mcta,mctb	R	Val: 0,1
cle.<addr>.<mct>.flag.is.winter	<mct>: mcta,mctb	R	Val: 0,1	1=winter	E’ inverno?	Is it winter?
cle.<addr>.<mct>.flag.keypad.locked	<mct>: mcta,mctb	R	Val: 0,1	1=active	Blocco keypad	Keypad lock
cle.<addr>.<mct>.flag.normally.closed.contact.window	<mct>: mcta,mctb	R	Val: 0,1	1=NC	Contatto finestra normalmente chiuso	Normally closed window contact
cle.<addr>.<mct>.flag.pgm.allow	<mct>: mcta,mctb	R	Val: 0,1
cle.<addr>.<mct>.flag.rsir1.function.b.enabled	<mct>: mcta,mctb	R	Val: 0,1
cle.<addr>.<mct>.flag.window.open	<mct>: mcta,mctb	R	Val: 0,1	1=open	Finestra aperta	Window open
cle.<addr>.<mct>.flag.window.open.control.included	<mct>: mcta,mctb	R	Val: 0,1	1=included	Controllo finestra aperta	Window open check
cle.<addr>.<mct>.flag.wrx.auto.learning	<mct>: mcta,mctb	R	Val: 0,1
cle.<addr>.<mct>.keypad.event	<mct>: mcta,mctb	R	Val:click,down,up		Evento dal keypad	Keypad event
cle.<addr>.<mct>.keypad.event.data	<mct>: mcta,mctb	R	Val: plus, minus, fan, manu,cr		Tipo di dato inviato dal keypad	Data type sent from keypad
cle.<addr>.<mct>.offline	<mct>: mcta,mctb	R	Val: 0,1	1=offline	Offline	Offline
cle.<addr>.<mct>.percentage.pi	<mct>: mcta,mctb	R	Val: 0,100		Percentuale di apertura della valvola	Valve opening percentage
cle.<addr>.<mct>.relay.<x>.active	<mct>: mcta,mctb, <x>: 1..8	R	Val: 0,1	1=active	Relè X attivo o no	Relay X active or not
cle.<addr>.<mct>.temp.actual	<mct>: mcta,mctb	R	Val: yy.zzzz		Es: 22.3456 Temperatura corrente della stanza	Ex: 22.3456 Current room temperature
cle.<addr>.<mct>.temp.setpoint	<mct>: mcta,mctb	R	Val: integer		Temperature di setpoint della stanza	Room setpoint temperature
cle.<addr>.<mfp>.card.code	<mfp>: mfpa,mfpb	R	Val: integer		Codice carta presente nella MFP	Code card present in MFP
cle.<addr>.<mfp>.card.dnd	<mfp>: mfpa,mfpb	R	Val: 0,1	1=active	Carta non disturbare presente	Do Not Disturb card present
cle.<addr>.<mfp>.card.due.day	<mfp>: mfpa,mfpb	R	Val: 0..31		Giorno di scadenza carta	Card expiration day
cle.<addr>.<mfp>.card.due.hour	<mfp>: mfpa,mfpb	R	Val:0..23		Ora di scadenza carta	Card expiration time
cle.<addr>.<mfp>.card.due.month	<mfp>: mfpa,mfpb	R	Val:1..12		Mese di scadenza carta	Card expiration month
cle.<addr>.<mfp>.card.due.year	<mfp>: mfpa,mfpb	R	Val:last two digits of current year		Anno di scadenza carta	Card expiration year
cle.<addr>.<mfp>.card.level	<mfp>: mfpa,mfpb	R	Val: integer		Livello carta inserita in MFP	Card level inserted in MFP
cle.<addr>.<mfp>.card.reader.validity	<mfp>: mfpa,mfpb	R	Val: enabled, disabled, outoftime, clientinroom, cardexpired,abdisabled,safeopen		Tipo validità carta inserita in MFP	Validity type of card inserted in MFP
cle.<addr>.<mfp>.card.slot<x>	<mfp>: mfpa,mfpb - <x>: 1..5	R	Val: 0,1	1=active
cle.<addr>.<mfp>.excluded.festivity	<mfp>: mfpa,mfpb	R	Val: 0,1	1=disabled
cle.<addr>.<mfp>.excluded.friday	<mfp>: mfpa,mfpb	R	Val: 0,1	1=disabled
cle.<addr>.<mfp>.excluded.monday	<mfp>: mfpa,mfpb	R	Val: 0,1	1=disabled
cle.<addr>.<mfp>.excluded.saturday	<mfp>: mfpa,mfpb	R	Val: 0,1	1=disabled
cle.<addr>.<mfp>.excluded.sunday	<mfp>: mfpa,mfpb	R	Val: 0,1	1=disabled
cle.<addr>.<mfp>.excluded.thursday	<mfp>: mfpa,mfpb	R	Val: 0,1	1=disabled
cle.<addr>.<mfp>.excluded.tuesday	<mfp>: mfpa,mfpb	R	Val: 0,1	1=disabled
cle.<addr>.<mfp>.excluded.wednesday	<mfp>: mfpa,mfpb	R	Val: 0,1	1=disabled
cle.<addr>.<mfp>.exists	<mfp>: mfpa,mfpb	R	Val: 0,1	1=exists	MFP esiste o no	MFP exists or not
cle.<addr>.<mfp>.flag.card.inserted	<mfp>: mfpa,mfpb	R	Val: 0,1	1=present	Carta inserita	Card inserted
cle.<addr>.<mfp>.flag.card.read.error	<mfp>: mfpa,mfpb	R	Val: 0,1	1=error	Errore di lettura carta	Card reading error
cle.<addr>.<mfp>.flag.card.read.error.different.password	<mfp>: mfpa,mfpb	R	Val: 0,1	1=error
cle.<addr>.<mfp>.flag.password.error	<mfp>: mfpa,mfpb	R	Val: 0,1	1=error
cle.<addr>.<mfp>.flag.plant.code.error	<mfp>: mfpa,mfpb	R	Val: 0,1	1=error
cle.<addr>.<mfp>.led.call.cleaner	<mfp>: mfpa,mfpb	R	Val: on,off,slow,quick		Stato led cleaner	Cleaner LED status
cle.<addr>.<mfp>.led.customer.in.camera	<mfp>: mfpa,mfpb	R	Val: on,off,slow,quick		Stato led cliente nella stanza	Room client LED status
cle.<addr>.<mfp>.led.not.disturb	<mfp>: mfpa,mfpb	R	Val: on,off,slow,quick		Stato led DND	Do Not Disturb LED status
cle.<addr>.<mfp>.led.rejection	<mfp>: mfpa,mfpb	R	Val: on,off,slow,quick		Stato led carta rifiutata	Rejected card LED status
cle.<addr>.<mfp>.led.sos	<mfp>: mfpa,mfpb	R	Val: on,off,slow,quick		Stato led SOS	SOS LED status
cle.<addr>.<mfp>.offline	<mfp>: mfpa,mfpb	R	Val: 0,1	1=offline	MFP offline o no	MFP offline or not
cle.<addr>.<mfp>.plant.code	<mfp>: mfpa,mfpb	R	Val: integer		Codice impianto	System code
cle.<addr>.<mfp>.transit.day	<mfp>: mfpa,mfpb	R	Val:1..31
cle.<addr>.<mfp>.transit.hour	<mfp>: mfpa,mfpb	R	Val:0..23
cle.<addr>.<mfp>.transit.minute	<mfp>: mfpa,mfpb	R	Val:1..59
cle.<addr>.<mfp>.transit.month	<mfp>: mfpa,mfpb	R	Val:1..12
cle.<addr>.<mfp>.transit.times	<mfp>: mfpa,mfpb	R	Val: integer
cle.<addr>.<mfp>.value	<mfp>: mfpa,mfpb	R	Val: 0,1
cle.<addr>.pouch.simulation.inputs		R	Val: integer
cle.<addr>.scf.exists		R	Val: 0,1	1=exists
cle.<addr>.scf.offline		R	Val: 0,1	1=exists
cle.<addr>.slot<x>.end.hour	<x>: 0..4	R	Val:0..23
cle.<addr>.slot<x>.end.minute	<x>: 0..4	R	Val:1..59
cle.<addr>.slot<x>.start.hour	<x>: 0..4	R	Val:0..23
cle.<addr>.slot<x>.start.minute	<x>: 0..4	R	Val:1..59
cle.<addr>.tr.value		R	Val: integer
cle.<addr>.<tsc>.card.code	<tsc>:tsca,tscb	R	Val: integer		Codice carta presenta nella tasca TSC	Code card present in TSC pocket
cle.<addr>.<tsc>.card.dnd	<tsc>:tsca,tscb	R	Val: 0,1		Carta non disturbare presente	Do Not Disturb card present
cle.<addr>.<tsc>.card.due.day	<tsc>:tsca,tscb	R	Val:1..31		Giorno di scadenza carta	Card expiration day
cle.<addr>.<tsc>.card.due.hour	<tsc>:tsca,tscb	R	Val:0..23		Ora di scadenza carta	Card expiration time
cle.<addr>.<tsc>.card.due.month	<tsc>:tsca,tscb	R	Val:1..12		Mese di scadenza carta	Card expiration month
cle.<addr>.<tsc>.card.due.year	<tsc>:tsca,tscb	R	Val:last two digits of current year		Anno di scadenza carta	Card expiration year
cle.<addr>.<tsc>.card.level	<tsc>:tsca,tscb	R	Val: integer		Livello carta inserita in TSC	Card level inserted in TSC pocket
cle.<addr>.<tsc>.card.reader.validity	<tsc>:tsca,tscb	R	Val: enabled, disabled, outoftime, clientinroom, cardexpired,abdisabled,safeopen		Tipo validità carta inserita in TSC	Validity type of card inserted in TSC pocket
cle.<addr>.<tsc>.card.slot<x>	<tsc>:tsca,tscb - <x>: 1..5"	R	Val: 0,1
cle.<addr>.<tsc>.excluded.festivity	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.excluded.friday	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.excluded.monday	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.excluded.saturday	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.excluded.sunday	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.excluded.thursday	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.excluded.tuesday	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.excluded.wednesday	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.exists	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.flag.card.inserted	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.flag.card.read.error	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.flag.card.read.error.different.password	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.flag.password.error	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.flag.plant.code.error	<tsc>:tsca,tscb	R	Val: 0,1
cle.<addr>.<tsc>.led.arrow	<tsc>:tsca,tscb	R	Val: on,off,slow,quick
cle.<addr>.<tsc>.led.call.cleaner	<tsc>:tsca,tscb	R	Val: on,off,slow,quick
cle.<addr>.<tsc>.offline	<tsc>:tsca,tscb	R	Val: 0,1	1=offline	TSC offline o no	TSC offline or not
cle.<addr>.<tsc>.plant.code	<tsc>:tsca,tscb	R	Val: integer		Codice impianto	System code
cle.<addr>.virtual.input.incma.mode		R	Val: normal, relative
cle.<addr>.virtual.input.incmb.mode		R	Val: normal, relative
cle.<addr>.wrx.exists		R	Val: 0,1	1=exists
cle.<addr>.wrx.offline		R	Val: 0,1	1=exists