Difference between revisions of "Cle"
Jump to navigation
Jump to search
(7 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | + | CLE is an I/O servers that allows the supervision of CLE automation hotel management modules. | |
This driver complies with the Xcom communication protocol | This driver complies with the Xcom communication protocol | ||
+ | |||
+ | This is the complete list of supported modules: | ||
+ | |||
+ | {| class="wikitable" | ||
+ | ! Thermostats !! (various models, articles MCT5, MCT6, MCU5, MCU6) installed as TermoA and B | ||
+ | |- | ||
+ | | Internal pocket || (article MTS3) installed as MTS A and MTS B | ||
+ | |- | ||
+ | | External out of the door reader || (article MFP, PRX) or integrated on the control panel | ||
+ | |- | ||
+ | | Wireless receivers || article WRX only presence | ||
+ | |- | ||
+ | | Safe || CSF only presence | ||
+ | |} | ||
[[Category:I/O Server]] | [[Category:I/O Server]] | ||
Line 26: | Line 40: | ||
| none | | none | ||
|} | |} | ||
+ | |||
+ | == Datapoints == | ||
{| class="wikitable" | {| class="wikitable" |
Latest revision as of 16:56, 5 April 2023
CLE is an I/O servers that allows the supervision of CLE automation hotel management modules.
This driver complies with the Xcom communication protocol
This is the complete list of supported modules:
Thermostats | (various models, articles MCT5, MCT6, MCU5, MCU6) installed as TermoA and B |
---|---|
Internal pocket | (article MTS3) installed as MTS A and MTS B |
External out of the door reader | (article MFP, PRX) or integrated on the control panel |
Wireless receivers | article WRX only presence |
Safe | CSF only presence |
Communication
The driver supports communication through RS-485 serial interface.
RS-485 parameters:
Baud rate | <19200-57600> |
Data bits | 8 |
Stop bit | 1 |
Parity | none |
Flow control | none |
Datapoints
ID | INDEX | R/W | VALUE | VALUE MEANING | INFO (ITA) | INFO (ENG) |
---|---|---|---|---|---|---|
cle.<addr>.digital.output.<x>.value | <x>: 1..8 | W | Val: 0,1 | Controlla uscita digitale X | Check digital output X | |
cle.<addr>.digital.input.reset | W | Val: 1 | 1 = reset | Resetta tutti gli ingressi digitali | Reset all digital inputs | |
cle.<addr>.digital.input.<x>.reset | <x>: 1..8 | W | Val: 1 | 1 = reset | Resetta ingressi digitali X | Reset digital input X |
cle.<addr>.settings.reset | W | Val: 1 | 1 = reset | Resetta impostazioni plugin | Reset plugin settings | |
cle.<addr>.digital.input.<x>.name | <x>: 1..8 | W | Val: string | Cambia il nome all’ingresso digitale | Change name of digital input | |
cle.<addr>.digital.output.<x>.name | <x>: 1..8 | W | Val: string | Cambia il nome all’uscita | Change name of output | |
cle.<addr>.<mct>.name | <mct>: mcta,mctb | W | Val: string | Cambia il nome al termostato | Change name of thermostat | |
cle.<addr>.<mct>.season | <mct>: mcta,mctb | W | Val: summer, winter | Modifica stagione termostato | Modify thermostat season | |
cle.<addr>.<mct>.temp.anti.freeze | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint antigelo | Modify anti-freeze setpoint | |
cle.<addr>.<mct>.temp.comfort | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint comfort | Modify comfort setpoint | |
cle.<addr>.<mct>.temp.maintenance | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint manutenzione | Modify maintenance setpoint | |
cle.<addr>.<mct>.temp.maintenance.max | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint max manutenzione | Modify max maintenance setpoint | |
cle.<addr>.<mct>.temp.max | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint max | Modify max setpoint | |
cle.<addr>.<mct>.temp.min | <mct>: mcta,mctb | W | Val: integer | Modifica setpoint min | Modify min setpoint | |
cle.<addr>.<mct>.flag.maintenance.or.comfort | <mct>: mcta,mctb | W | Val: maintenance, comfort | Imposta MCT in manutenzione o comfort | Set MCT to maintenance or comfort | |
cle.<addr>.online | R | Val: 0,1 | 1=online | Stato connessione bus | Bus connection status | |
cle.<addr>.aux.digital.input.<x>.disabled | <x>: 1..8 | R | Val: 0,1 | 1=disabled | ||
cle.<addr>.card.<number>.enabled | R | Usati da plugin, non usare | Used by plugin, do not use | |||
cle.<addr>.card.new.code | R | Usati da plugin, non usare | Used by plugin, do not use | |||
cle.<addr>.card.new.enable | R | Usati da plugin, non usare | Used by plugin, do not use | |||
cle.<addr>.date.time.byte.data | R | Usati da plugin, non usare | Used by plugin, do not use | |||
cle.<addr>.date.time.day | R | Usati da plugin, non usare | Used by plugin, do not use | |||
cle.<addr>.date.time.daylight.savings.time | R | Usati da plugin, non usare | Used by plugin, do not use | |||
cle.<addr>.date.time.error | R | Usati da plugin, non usare | Used by plugin, do not use | |||
cle.<addr>.date.time.hour | R | Val:0..23 | Usati da plugin, non usare | Used by plugin, do not use | ||
cle.<addr>.date.time.minute | R | Val:1.59 | Usati da plugin, non usare | Used by plugin, do not use | ||
cle.<addr>.date.time.month | R | Val:1..12 | Usati da plugin, non usare | Used by plugin, do not use | ||
cle.<addr>.date.time.second | R | Val:1.59 | Usati da plugin, non usare | Used by plugin, do not use | ||
cle.<addr>.date.time.week.day | R | Val:1..7 | Usati da plugin, non usare | Used by plugin, do not use | ||
cle.<addr>.date.time.year | R | Val:last two digits of current year | Usati da plugin, non usare | Used by plugin, do not use | ||
cle.<addr>.digital.input.<x>.normally.open | <x>: 1..8 | R | Val: 0,1 | 1=NA | Se l’ingresso digitale X è normalmente aperto | If digital input X is normally open |
cle.<addr>.digital.input.<x>.retentive | <x>: 1..8 | R | Val: 0,1 | 1=latching | Se l’ingresso digitale X è ritentivo | Digital input X status is latching |
cle.<addr>.digital.input.<x>.value | <x>: 1..8 | R | Val: 0,1 | 1=close | Stato dell’ingresso digitale X | Indicate if output X is linked to digital input Y |
cle.<addr>.digital.output.<x>.bind.di<y> | <x>: 1..8 - <y>: 1..8 | R | Val: 0,1 | 1=binded | Indica se l’uscita X è legata all’ingresso digitale Y | |
cle.<addr>.digital.output.<x>.bind.virtual.input.incma | <x>: 1..8 | R | Val: 0,1 | 1=binded | Indica se l’uscita X è legata alll’input virtuale incma | Indicate if output X is linked to virtual input incma |
cle.<addr>.digital.output.<x>.bind.virtual.input.incmb | <x>: 1..8 | R | Val: 0,1 | 1=binded | Indica se l’uscita X è legata alll’input virtuale incmb | Indicate if output X is linked to virtual input incmb |
cle.<addr>.digital.output.<x>.disabled | <x>: 1..8 | R | Val: 0,1 | 1=disabled | Uscita X disabilitata | Output X disabled |
cle.<addr>.digital.output.<x>.inputs.mode | <x>: 1..8 | R | Val: and,or | |||
cle.<addr>.digital.output.<x>.normally.open | <x>: 1..8 | R | Val: 0,1 | 1=NA | Uscita X normalmente aperta | Output X normally open |
cle.<addr>.digital.output.<x>.type | <x>: 1..8 | R | Val: timerized,monostable,bistable | Tipo dell’uscita X | Type of output X | |
cle.<addr>.digital.output.<x>.value | <x>: 1..8 | R | Val: 0,1 | 1=close | Stato dell’uscita X | Status of output X |
cle.<addr>.esxj4r_a.exists | R | Val: 0,1 | 1=exists | |||
cle.<addr>.esxj4r_a.offline | R | Val: 0,1 | 1=offline | |||
cle.<addr>.esxj4r_b.exists | R | Val: 0,1 | 1=exists | |||
cle.<addr>.esxj4r_b.offline | R | Val: 0,1 | 1=offline | |||
cle.<addr>.esxj4r_c.exists | R | Val: 0,1 | 1=exists | |||
cle.<addr>.esxj4r_c.offline | R | Val: 0,1 | 1=offline | |||
cle.<addr>.esxy4.exists | R | Val: 0,1 | 1=exists | |||
cle.<addr>.esxy4.offline | R | Val: 0,1 | 1=offline | |||
cle.<addr>.firmware.name | R | Val: string | Nome del firmware installato sul modulo hotel | Firmware name installed on hotel module | ||
cle.<addr>.firmware.release | R | Val: string | Release del firmware installato sul modulo hotel | Firmware release installed on hotel module | ||
cle.<addr>.firmware.version | R | Val: string | Versione del firmware installato sul modulo hotel | Firmware version installed on hotel module | ||
cle.<addr>.function.anti.intrusion.insertion | R | Val: manual,automatc | ||||
cle.<addr>.function.anti.theft.active | R | Val: 0,1 | 1=active | Stato antifurto | Anti-theft status | |
cle.<addr>.function.call.cleaner.active | R | Val: 0,1 | 1=active | Stato chiamata pulizia camera | Housekeeping call status | |
cle.<addr>.function.dbk.active | R | Val: 0,1 | ||||
cle.<addr>.function.door.open.without.card.in.pouch.active | R | Val: 0,1 | 1=active | Porta camera aperta e tessera non presente nella tasca | Room door open and keycard not present | |
cle.<addr>.function.fc8.active | R | Val: 0,1 | ||||
cle.<addr>.function.intrusion.alarm.active | R | Val: 0,1 | ||||
cle.<addr>.function.maintenance.request.active | R | Val: 0,1 | 1=active | Allarme antifurto | Alarm activated | |
cle.<addr>.function.not.disturb.active | R | Val: 0,1 | 1=active | Do not Disturb attivato | Do Not Disturb mode activated | |
cle.<addr>.function.pouch.input.simulation.active | R | Val: 0,1 | 1=active | Simulazione ingresso tasca attivato | "Pocket entry simulation activated | |
cle.<addr>.function.programming.authorization.active | R | Val: 0,1 | ||||
cle.<addr>.function.room.checked.and.ready.active | R | Val: 0,1 | 1=active | Stanza pronta e effettuato check-in | Room ready and check-in done | |
cle.<addr>.function.room.checked.not.ready.active | R | Val: 0,1 | 1=active | Stanza non pronta | Room not ready | |
cle.<addr>.function.room.cleaning.request.active | R | Val: 0,1 | 1=active | Richiesta pulizia camera attiva | Housekeeping request active | |
cle.<addr>.function.room.maintance.done.and.ready.active | R | Val: 0,1 | 1=active | Manutenzione camera effettuata | Room maintenance done | |
cle.<addr>.function.room.maintance.done.not.ready.active | R | Val: 0,1 | 1=active | Manutenzione camera non effettuata | Room maintenance not done | |
cle.<addr>.function.room.ready.active | R | Val: 0,1 | 1=active | Stanza pronta | Room ready | |
cle.<addr>.function.serial.bus.alarm.simulation.active | R | Val: 0,1 | 1=active | Simulazione allarme sul bus seriale | Serial bus alarm simulation activated | |
cle.<addr>.function.sos.active | R | Val: 0,1 | 1=active | Funzione SOS attivata | SOS function activated | |
cle.<addr>.function.st43.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.st44.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.stac.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.stad.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.starc.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.stard.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.stc.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.std.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.wd43.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.wd44.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.wdc.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.function.wdd.active | R | Val: 0,1 | 1=active | |||
cle.<addr>.mcb.exists | R | Val: 0,1 | 1=exists | MCB esiste | MCB exists | |
cle.<addr>.mcb.offline | R | Val: 0,1 | 1=offline | MCB offline | MCB offline | |
cle.<addr>.<mct>.exists | <mct>: mcta,mctb | R | Val: 0,1 | 1=esiste | MCT esiste | MCT exists |
cle.<addr>.<mct>.fancoil.speed | <mct>: mcta,mctb | R | Val: automatic, off or number | Modo fancoil | Fan coil mode | |
cle.<addr>.<mct>.flag.actuator.work.mode | <mct>: mcta,mctb | R | Val: remoteoff,localoff,aautomatic,chrono | Velocità fancoil | Fan coil speed | |
cle.<addr>.<mct>.flag.auto.summer.winter.commutation | <mct>: mcta,mctb | R | Val: 0,1 | 1=automatic | Commutazione estate inverno automatica | Automatic summer/winter switch |
cle.<addr>.<mct>.flag.datetime.error | <mct>: mcta,mctb | R | Val: 0,1 | 1=error | Errore data | Date error |
cle.<addr>.<mct>.flag.display.intensity.included | <mct>: mcta,mctb | R | Val: 0,1 | |||
cle.<addr>.<mct>.flag.electrovalve.work.mode | <mct>: mcta,mctb | R | Val: regular,setpoint | |||
cle.<addr>.<mct>.flag.external.sensor.fault | <mct>: mcta,mctb | R | Val: 0,1 | 1=error | Errore sensore temperatura esterno | External temperature sensor error |
cle.<addr>.<mct>.flag.external.sensor.temp.anomaly | <mct>: mcta,mctb | R | Val: 0,1 | 1=error | Anomalia sensore temperatura esterno | External temperature sensor anomaly |
cle.<addr>.<mct>.flag.fahrenheit.or.celsius | <mct>: mcta,mctb | R | Val:fahrenheit,celsius | |||
cle.<addr>.<mct>.flag.internal.sensor.fault | <mct>: mcta,mctb | R | Val: 0,1 | Errore sensore temperatura interno | Internal temperature sensor error | |
cle.<addr>.<mct>.flag.internal.sensor.temp.anomaly | <mct>: mcta,mctb | R | Val: 0,1 | Anomalia sensore temperatura interno | Internal temperature sensor anomaly | |
cle.<addr>.<mct>.flag.ir.input.function.b.enabled | <mct>: mcta,mctb | R | Val: 0,1 | |||
cle.<addr>.<mct>.flag.ir.status | <mct>: mcta,mctb | R | Val: 0,1 | |||
cle.<addr>.<mct>.flag.is.winter | <mct>: mcta,mctb | R | Val: 0,1 | 1=winter | E’ inverno? | Is it winter? |
cle.<addr>.<mct>.flag.keypad.locked | <mct>: mcta,mctb | R | Val: 0,1 | 1=active | Blocco keypad | Keypad lock |
cle.<addr>.<mct>.flag.normally.closed.contact.window | <mct>: mcta,mctb | R | Val: 0,1 | 1=NC | Contatto finestra normalmente chiuso | Normally closed window contact |
cle.<addr>.<mct>.flag.pgm.allow | <mct>: mcta,mctb | R | Val: 0,1 | |||
cle.<addr>.<mct>.flag.rsir1.function.b.enabled | <mct>: mcta,mctb | R | Val: 0,1 | |||
cle.<addr>.<mct>.flag.window.open | <mct>: mcta,mctb | R | Val: 0,1 | 1=open | Finestra aperta | Window open |
cle.<addr>.<mct>.flag.window.open.control.included | <mct>: mcta,mctb | R | Val: 0,1 | 1=included | Controllo finestra aperta | Window open check |
cle.<addr>.<mct>.flag.wrx.auto.learning | <mct>: mcta,mctb | R | Val: 0,1 | |||
cle.<addr>.<mct>.keypad.event | <mct>: mcta,mctb | R | Val:click,down,up | Evento dal keypad | Keypad event | |
cle.<addr>.<mct>.keypad.event.data | <mct>: mcta,mctb | R | Val: plus, minus, fan, manu,cr | Tipo di dato inviato dal keypad | Data type sent from keypad | |
cle.<addr>.<mct>.offline | <mct>: mcta,mctb | R | Val: 0,1 | 1=offline | Offline | Offline |
cle.<addr>.<mct>.percentage.pi | <mct>: mcta,mctb | R | Val: 0,100 | Percentuale di apertura della valvola | Valve opening percentage | |
cle.<addr>.<mct>.relay.<x>.active | <mct>: mcta,mctb, <x>: 1..8 | R | Val: 0,1 | 1=active | Relè X attivo o no | Relay X active or not |
cle.<addr>.<mct>.temp.actual | <mct>: mcta,mctb | R | Val: yy.zzzz | Es: 22.3456 Temperatura corrente della stanza | Ex: 22.3456 Current room temperature | |
cle.<addr>.<mct>.temp.setpoint | <mct>: mcta,mctb | R | Val: integer | Temperature di setpoint della stanza | Room setpoint temperature | |
cle.<addr>.<mfp>.card.code | <mfp>: mfpa,mfpb | R | Val: integer | Codice carta presente nella MFP | Code card present in MFP | |
cle.<addr>.<mfp>.card.dnd | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=active | Carta non disturbare presente | Do Not Disturb card present |
cle.<addr>.<mfp>.card.due.day | <mfp>: mfpa,mfpb | R | Val: 0..31 | Giorno di scadenza carta | Card expiration day | |
cle.<addr>.<mfp>.card.due.hour | <mfp>: mfpa,mfpb | R | Val:0..23 | Ora di scadenza carta | Card expiration time | |
cle.<addr>.<mfp>.card.due.month | <mfp>: mfpa,mfpb | R | Val:1..12 | Mese di scadenza carta | Card expiration month | |
cle.<addr>.<mfp>.card.due.year | <mfp>: mfpa,mfpb | R | Val:last two digits of current year | Anno di scadenza carta | Card expiration year | |
cle.<addr>.<mfp>.card.level | <mfp>: mfpa,mfpb | R | Val: integer | Livello carta inserita in MFP | Card level inserted in MFP | |
cle.<addr>.<mfp>.card.reader.validity | <mfp>: mfpa,mfpb | R | Val: enabled, disabled, outoftime, clientinroom, cardexpired,abdisabled,safeopen | Tipo validità carta inserita in MFP | Validity type of card inserted in MFP | |
cle.<addr>.<mfp>.card.slot<x> | <mfp>: mfpa,mfpb - <x>: 1..5 | R | Val: 0,1 | 1=active | ||
cle.<addr>.<mfp>.excluded.festivity | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
cle.<addr>.<mfp>.excluded.friday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
cle.<addr>.<mfp>.excluded.monday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
cle.<addr>.<mfp>.excluded.saturday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
cle.<addr>.<mfp>.excluded.sunday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
cle.<addr>.<mfp>.excluded.thursday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
cle.<addr>.<mfp>.excluded.tuesday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
cle.<addr>.<mfp>.excluded.wednesday | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=disabled | ||
cle.<addr>.<mfp>.exists | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=exists | MFP esiste o no | MFP exists or not |
cle.<addr>.<mfp>.flag.card.inserted | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=present | Carta inserita | Card inserted |
cle.<addr>.<mfp>.flag.card.read.error | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=error | Errore di lettura carta | Card reading error |
cle.<addr>.<mfp>.flag.card.read.error.different.password | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=error | ||
cle.<addr>.<mfp>.flag.password.error | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=error | ||
cle.<addr>.<mfp>.flag.plant.code.error | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=error | ||
cle.<addr>.<mfp>.led.call.cleaner | <mfp>: mfpa,mfpb | R | Val: on,off,slow,quick | Stato led cleaner | Cleaner LED status | |
cle.<addr>.<mfp>.led.customer.in.camera | <mfp>: mfpa,mfpb | R | Val: on,off,slow,quick | Stato led cliente nella stanza | Room client LED status | |
cle.<addr>.<mfp>.led.not.disturb | <mfp>: mfpa,mfpb | R | Val: on,off,slow,quick | Stato led DND | Do Not Disturb LED status | |
cle.<addr>.<mfp>.led.rejection | <mfp>: mfpa,mfpb | R | Val: on,off,slow,quick | Stato led carta rifiutata | Rejected card LED status | |
cle.<addr>.<mfp>.led.sos | <mfp>: mfpa,mfpb | R | Val: on,off,slow,quick | Stato led SOS | SOS LED status | |
cle.<addr>.<mfp>.offline | <mfp>: mfpa,mfpb | R | Val: 0,1 | 1=offline | MFP offline o no | MFP offline or not |
cle.<addr>.<mfp>.plant.code | <mfp>: mfpa,mfpb | R | Val: integer | Codice impianto | System code | |
cle.<addr>.<mfp>.transit.day | <mfp>: mfpa,mfpb | R | Val:1..31 | |||
cle.<addr>.<mfp>.transit.hour | <mfp>: mfpa,mfpb | R | Val:0..23 | |||
cle.<addr>.<mfp>.transit.minute | <mfp>: mfpa,mfpb | R | Val:1..59 | |||
cle.<addr>.<mfp>.transit.month | <mfp>: mfpa,mfpb | R | Val:1..12 | |||
cle.<addr>.<mfp>.transit.times | <mfp>: mfpa,mfpb | R | Val: integer | |||
cle.<addr>.<mfp>.value | <mfp>: mfpa,mfpb | R | Val: 0,1 | |||
cle.<addr>.pouch.simulation.inputs | R | Val: integer | ||||
cle.<addr>.scf.exists | R | Val: 0,1 | 1=exists | |||
cle.<addr>.scf.offline | R | Val: 0,1 | 1=exists | |||
cle.<addr>.slot<x>.end.hour | <x>: 0..4 | R | Val:0..23 | |||
cle.<addr>.slot<x>.end.minute | <x>: 0..4 | R | Val:1..59 | |||
cle.<addr>.slot<x>.start.hour | <x>: 0..4 | R | Val:0..23 | |||
cle.<addr>.slot<x>.start.minute | <x>: 0..4 | R | Val:1..59 | |||
cle.<addr>.tr.value | R | Val: integer | ||||
cle.<addr>.<tsc>.card.code | <tsc>:tsca,tscb | R | Val: integer | Codice carta presenta nella tasca TSC | Code card present in TSC pocket | |
cle.<addr>.<tsc>.card.dnd | <tsc>:tsca,tscb | R | Val: 0,1 | Carta non disturbare presente | Do Not Disturb card present | |
cle.<addr>.<tsc>.card.due.day | <tsc>:tsca,tscb | R | Val:1..31 | Giorno di scadenza carta | Card expiration day | |
cle.<addr>.<tsc>.card.due.hour | <tsc>:tsca,tscb | R | Val:0..23 | Ora di scadenza carta | Card expiration time | |
cle.<addr>.<tsc>.card.due.month | <tsc>:tsca,tscb | R | Val:1..12 | Mese di scadenza carta | Card expiration month | |
cle.<addr>.<tsc>.card.due.year | <tsc>:tsca,tscb | R | Val:last two digits of current year | Anno di scadenza carta | Card expiration year | |
cle.<addr>.<tsc>.card.level | <tsc>:tsca,tscb | R | Val: integer | Livello carta inserita in TSC | Card level inserted in TSC pocket | |
cle.<addr>.<tsc>.card.reader.validity | <tsc>:tsca,tscb | R | Val: enabled, disabled, outoftime, clientinroom, cardexpired,abdisabled,safeopen | Tipo validità carta inserita in TSC | Validity type of card inserted in TSC pocket | |
cle.<addr>.<tsc>.card.slot<x> | <tsc>:tsca,tscb - <x>: 1..5" | R | Val: 0,1 | |||
cle.<addr>.<tsc>.excluded.festivity | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.excluded.friday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.excluded.monday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.excluded.saturday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.excluded.sunday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.excluded.thursday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.excluded.tuesday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.excluded.wednesday | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.exists | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.flag.card.inserted | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.flag.card.read.error | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.flag.card.read.error.different.password | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.flag.password.error | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.flag.plant.code.error | <tsc>:tsca,tscb | R | Val: 0,1 | |||
cle.<addr>.<tsc>.led.arrow | <tsc>:tsca,tscb | R | Val: on,off,slow,quick | |||
cle.<addr>.<tsc>.led.call.cleaner | <tsc>:tsca,tscb | R | Val: on,off,slow,quick | |||
cle.<addr>.<tsc>.offline | <tsc>:tsca,tscb | R | Val: 0,1 | 1=offline | TSC offline o no | TSC offline or not |
cle.<addr>.<tsc>.plant.code | <tsc>:tsca,tscb | R | Val: integer | Codice impianto | System code | |
cle.<addr>.virtual.input.incma.mode | R | Val: normal, relative | ||||
cle.<addr>.virtual.input.incmb.mode | R | Val: normal, relative | ||||
cle.<addr>.wrx.exists | R | Val: 0,1 | 1=exists | |||
cle.<addr>.wrx.offline | R | Val: 0,1 | 1=exists |