Difference between revisions of "RACKPDU"
| Line 9: | Line 9: | ||
== PDU Configuration == | == PDU Configuration == | ||
In order to be able to control the device with HSYCO SERVER, remote access to the command line interface via SSH must be enabled. | In order to be able to control the device with HSYCO SERVER, remote access to the command line interface via SSH must be enabled. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== HSYCO Configuration == | == HSYCO Configuration == | ||
Revision as of 18:19, 14 June 2017
The APC by Schneider Electric Rack Power Distribution Unit (PDU) may be used as a stand-alone, network- manageable power distribution device or up to four devices can be connected together using one network connection. The Rack PDU provides real-time remote monitoring of connected loads.
The HSYCO RACKPDU driver supports the AP88XX and AP78XXB Metered models.
Contents
PDU Configuration
In order to be able to control the device with HSYCO SERVER, remote access to the command line interface via SSH must be enabled.
HSYCO Configuration
Add a WXT520 I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- Comm ID: select the comm port connected to the device.
High Availability
- Shutdown when inactive: defaults to true.
Options
| ID | Default | Values | Description |
|---|---|---|---|
| gui | false | true | enable support for the UISET actions |
| false | disable UI support | ||
| altitude | 0 | integer number | the station's installation altitude above mean sea level.
This optional parameter is used to convert the measured local atmospheric pressure to mean sea level pressure (MSLP). The conversion function takes into account the altitude and local temperature. If this paramter is not set or set to 0, the measured pressure value will be returned unmodified. |
Datapoints
All measured values returned as datapoints use the units as set in the WXT520. The unit is not returned in the datapoint value.
| ID | Value | R/W | Description |
|---|---|---|---|
| status | online | R | connection established |
| offline | R | HSYCO can’t connect to the WXT520 | |
| sn | <value> | R | wind speed minimum (m/s, km/h, mph, knots) |
| sm | <value> | R | wind speed average (m/s, km/h, mph, knots) |
| sx | <value> | R | wind speed maximum (m/s, km/h, mph, knots) |
| dn | <value> | R | wind direction minimum (deg) |
| dm | <value> | R | wind direction average (deg) |
| dx | <value> | R | wind direction maximum (deg) |
| pa | <value> | R | air pressure (hPa, Pa, bar, mmHg, inHg), converted to mean sea level pressure if the altitude option is set |
| ta | <value> | R | air temperature (C, F) |
| tp | <value> | R | internal temperature (C, F) |
| ua | <value> | R | relative humidity (%RH) |
| rc | <value> | R | rain accumulation (mm, in) |
| rd | <value> | R | rain duration (s) |
| ri | <value> | R | rain intensity (mm/h, in/h) |
| rp | <value> | R | rain peak intensity (mm/h, in/h) |
| hc | <value> | R | hail accumulation (hits/cm2, hits/in2, hits) |
| hd | <value> | R | hail duration (s) |
| hi | <value> | R | hail intensity (hits/cm2h, hits/in2h, hits/ h) |
| hp | <value> | R | hail peak intensity (hits/cm2h, hits/in2h, hits/ h) |
| th | <value> | R | heating temperature (C, F) |
| vh | <value> | R | heating voltage (V) |
| vs | <value> | R | supply voltage (V) |
| vr | <value> | R | 3.5 V ref. voltage (V) |
| id | <value> | R | information field |
UISET Actions
| ID | Attribute | Set to | Description |
|---|---|---|---|
| sn | value | <value> <unit> | wind speed minimum (m/s, km/h, mph, knots) |
| sm | value | <value> <unit> | wind speed average (m/s, km/h, mph, knots) |
| sx | value | <value> <unit> | wind speed maximum (m/s, km/h, mph, knots) |
| dn | value | <value> <unit> | wind direction minimum (deg) |
| dm | value | <value> <unit> | wind direction average (deg) |
| dn | value | <value> <unit> | wind direction minimum (deg) |
| dx | value | <value> <unit> | wind direction maximum (deg) |
| pa | value | <value> <unit> | air pressure (hPa, Pa, bar, mmHg, inHg), converted to mean sea level pressure if the altitude option is set |
| ta | value | <value> <unit> | air temperature (C, F) |
| tp | value | <value> <unit> | internal temperature (C, F) |
| ua | value | <value> <unit> | relative humidity (%RH) |
| rc | value | <value> <unit> | rain accumulation (mm, in) |
| rd | value | <value> <unit> | rain duration (s) |
| ri | value | <value> <unit> | rain intensity (mm/h, in/h) |
| rp | value | <value> <unit> | rain peak intensity (mm/h, in/h) |
| hc | value | <value> <unit> | hail accumulation (hits/cm2, hits/in2, hits) |
| hd | value | <value> <unit> | hail duration (s) |
| hi | value | <value> <unit> | hail intensity (hits/cm2h, hits/in2h, hits/ h) |
| hp | value | <value> <unit> | hail peak intensity (hits/cm2h, hits/in2h, hits/ h) |
| th | value | <value> <unit> | heating temperature (C, F) |
| vh | value | <value> <unit> | heating voltage (V) |
| vs | value | <value> <unit> | supply voltage (V) |
| vr | value | <value> <unit> | 3.5 V ref. voltage (V) |
| id | value | <value> <unit> | information field |
Release Notes
3.4.0
- initial version release
Vaisala is a registered trademarks of Vaisala Oyj.
