Difference between revisions of "RACKPDU"
(→3.6.0) |
|||
| Line 207: | Line 207: | ||
== Release Notes == | == Release Notes == | ||
| − | === 3. | + | === 3.6.0 === |
*initial version release | *initial version release | ||
| Line 213: | Line 213: | ||
| − | '' | + | ''APC, StruxureWare, and PowerNet are trademarks owned by Schneider Electric Industries, S.A.S., or its affiliated companies. All other trademarks are property of their respective owners.'' |
Revision as of 18:26, 14 June 2017
The APC by Schneider Electric Rack Power Distribution Unit (PDU) may be used as a stand-alone, network- manageable power distribution device or up to four devices can be connected together using one network connection. The Rack PDU provides real-time remote monitoring of connected loads.
The HSYCO RACKPDU driver supports the AP88XX and AP78XXB Metered models.
Contents
PDU Configuration
In order to be able to control the device with HSYCO SERVER, remote access to the command line interface via SSH must be enabled.
HSYCO Configuration
Add a RACKPDU I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- IP Address: the IP address of the device
- IP Port: TCP/IP port to use (defaults to 22)
- User: the SSH user (defaults to "apc")
- Password: the SSH password (defaults to "apc").
High Availability
- Shutdown when inactive: defaults to false.
Options
| ID | Default | Values | Description |
|---|---|---|---|
| startupevents | false | true | generate IO events also during the driver’s start-up phase |
| false | start generating events only after HSYCO is aligned with the current status of the system |
Datapoints
All measured values returned as datapoints use the units as set in the PDU. The unit is not returned in the datapoint value.
| ID | Value | R/W | Description |
|---|---|---|---|
| status | online | R | connection established |
| offline | R | HSYCO can’t connect to the WXT520 | |
| sn | <value> | R | wind speed minimum (m/s, km/h, mph, knots) |
| sm | <value> | R | wind speed average (m/s, km/h, mph, knots) |
| sx | <value> | R | wind speed maximum (m/s, km/h, mph, knots) |
| dn | <value> | R | wind direction minimum (deg) |
| dm | <value> | R | wind direction average (deg) |
| dx | <value> | R | wind direction maximum (deg) |
| pa | <value> | R | air pressure (hPa, Pa, bar, mmHg, inHg), converted to mean sea level pressure if the altitude option is set |
| ta | <value> | R | air temperature (C, F) |
| tp | <value> | R | internal temperature (C, F) |
| ua | <value> | R | relative humidity (%RH) |
| rc | <value> | R | rain accumulation (mm, in) |
| rd | <value> | R | rain duration (s) |
| ri | <value> | R | rain intensity (mm/h, in/h) |
| rp | <value> | R | rain peak intensity (mm/h, in/h) |
| hc | <value> | R | hail accumulation (hits/cm2, hits/in2, hits) |
| hd | <value> | R | hail duration (s) |
| hi | <value> | R | hail intensity (hits/cm2h, hits/in2h, hits/ h) |
| hp | <value> | R | hail peak intensity (hits/cm2h, hits/in2h, hits/ h) |
| th | <value> | R | heating temperature (C, F) |
| vh | <value> | R | heating voltage (V) |
| vs | <value> | R | supply voltage (V) |
| vr | <value> | R | 3.5 V ref. voltage (V) |
| id | <value> | R | information field |
Release Notes
3.6.0
- initial version release
APC, StruxureWare, and PowerNet are trademarks owned by Schneider Electric Industries, S.A.S., or its affiliated companies. All other trademarks are property of their respective owners.
