WXonline

This driver provides weather information and forecasts retrieved from the OpenWeatherMap.

HSYCO Configuration

Add an WXONLINE I/O Server in the I/O Servers section of the Settings and set its parameters.

Note that the WXONLINE I/O Server doesn't count in the I/O servers license total, so you don't need an extra I/O Server license to use WXONLINE with HSYCO.

High Availability

• Shutdown when inactive: defaults to true.

Options

ID	Default	Values	Description
gui	true	true	enable support for the UI object and UISET actions
		false	disable UI support
pollinterval	10	n >= 10	the data acquisition interval, in minutes
location		<id> or <lat>:<lon>	ID of the target location or coordinates
key		<key>	OpenWeatherMap API key

The 'location' option is required. To obtain the ID of the desired location, look for it this list. Otherwise, you can specify the geographic coordinates of the location using the format "<latitude>:<longitude>" (e.g. "45.461001:9.183567").

The 'key' option can be obtained creating an account on OpenWeatherMap. If this option is not specified, a default API key will be used and the 'pollinterval' option wont't allow for values below 60.

Datapoints

ID	Value	R/W	Description
connection	online	R	connection established
	offline	R	HSYCO can't connect to the panel
location	<location>	R	the target location is set to <location> (e.g. “New York, NY, United States”)
	<id> or <lat>:<lon>	W	set the location to the specified value
condition	<condition>	R	the current weather condition (refer to the conditions table for a complete list of possible values)
condition.clear	1	R	the current condition is categorized as “clear”
	0	R	the current condition is not categorized as “clear”
condition.precipitation	1	R	the current condition is categorized as “precipitation”
	0	R	the current condition is not categorized as “precipitation”
condition.storm	1	R	the current condition is categorized as “storm”
	0	R	the current condition is not categorized as “storm”
condition.partly_cloudy	1	R	the current condition is categorized as “partly cloudy”
	0	R	the current condition is not categorized as "partly cloudy”
condition.low_visibility	1	R	the current condition is categorized as “low visibility”
	0	R	the current condition is not categorized as “low visibility”
temp.c	<val>	R	the reported current temperature corresponds to <val> (expressed in °C)
temp.f	<val>	R	the reported current temperature corresponds to <val> (expressed in °F)
humidity	<val>	R	the reported current humidity percentage corresponds to <val>
pressure	<val>	R	the reported current pressure in inches of mercury (inHg) corresponds to <val>. Multiply by 33.86389 to obtain the equivalent hPa value
wind.speed	<val>	R	the reported current wind speed corresponds to <val>
wind.dir	<val>	R	the reported current wind direction corresponds to <val> (expressed in degrees)
forecast.day.<n> (<n> = 1 ... 5)	<day>	R	the week day identified by <n> corresponds to <day> (i.e. “mon”, "tue", "wed", ...)
forecast.temp.low.c.<n> (<n> = 1 ... 5)	<val>	R	the forecasted lowest temperature for day <n> is <val> (expressed in °C)
forecast.temp.low.f.<n> (<n> = 1 ... 5)	<val>	R	the forecasted lowest temperature for day <n> is <val> (expressed in °F)
forecast.temp.high.c.<n> (<n> = 1 ... 5)	<val>	R	the forecasted highest temperature for day <n> is <val> (expressed in °C)
forecast.temp.high.f.<n> (<n> = 1 ... 5)	<val>	R	the forecasted highest temperature for day <n> is <val> (expressed in °F)
forecast.condition.<n> (<n> = 1 ... 5)	<condition>	R	the forecasted weather condition for day <n> corresponds to <condition> (refer to the conditions table for a complete list of possible values)
forecast.condition.clear.<n>	1	R	the forecasted condition for day <n> is categorized as "clear"
	0	R	the forecasted condition for day <n> is not categorized as "clear"
forecast.condition.precipitation.<n>	1	R	the forecasted condition for day <n> is categorized as "precipitation"
	0	R	the forecasted condition for day <n> is not categorized as "precipitation"
forecast.condition.storm.<n>	1	R	the forecasted condition for day <n> is categorized as "storm"
	0	R	the forecasted condition for day <n> is not categorized as "storm"
forecast.condition.partly_cloudy.<n>	1	R	the forecasted condition for day <n> is categorized as "partly cloudy"
	0	R	the forecasted condition for day <n> is not categorized as "partly cloudy"
forecast.condition.low_visibility.<n>	1	R	the forecasted condition for day <n> is categorized as "low visibility"
	0	R	the forecasted condition for day <n> is not categorized as "low visibility"

Conditions and categories

The following table shows the possible weather condition values and their categorization.

Categories are used to summarize relevant aspects of a specific condition so to simplify programming logic. The available categories are: clear (c), precipitation (p), storm (s), partly cloudy (pc), and low visibility (lv). For some conditions (e.g. “windy”) the categorization is not feasible; in such cases (denoted by "xx") the category datapoints will not be updated so to maintain the previous condition.

Condition	Categories
blowing_snow	p, lv
blustery	xx
clear_night	c
cloudy
cold	xx
drizzle	p
dust	lv
fair_day	pc
fair_night	pc
foggy	lv
freezing_drizzle	p
freezing_rain	p
hail	p
haze	lv
heavy_snow	p,lv
hot	c
hurricane	p, s, lv
isolated_thundershowers	p, s, lv
isolated_thunderstorms	p, s, lv
light_snow_showers	p, lv
mixed_rain_hail	p
mixed_rain_sleet	p
mixed_rain_snow	p
mixed_snow_sleet	p
mostly_cloudy_day
mostly_cloudy_night
partly_cloudy	pc
partly_cloudy_day	pc
partly_cloudy_night	pc
scattered_showers	p, lv
scattered_snow_showers	p, lv
scattered_thunderstorms	p, s, lv
severe_thunderstorms	p, s, lv
showers	p, lv
sleet	p
smoky	lv
snow	p
snow_flurries	p
snow_showers	p, lv
sunny	c
thundershowers	p, s, lv
thunderstorms	p, s, lv
tornado	s
tropical_storm	p, s, lv
windy	xx
unknown	xx

User Interface

Weather Object

Shows a weather panel with current conditions and forecast.

Parameters

• id: the object's ID, used by UISets. Required
• position: the object's position. Use the pixels or rows and columns coordinates format

Syntax

(weather!<id> <position>)

E.g.

(weather!wx x10y20)

UISET Actions

ID	Attribute	Set to
connection.label	visible	true	when datapoint connection = offline
		false	when datapoint connection = online
location	value	the target location (e.g. “New York, NY, United States”)
temp.c	value	the reported current temperature followed by "°C"
temp.c.nounit	value	the reported current temperature without unit (expressed in °C)
temp.f	value	the reported current temperature followed by "°F"
temp.f.nounit	value	the reported current temperature without unit (expressed in °F)
humidity	value	the reported current humidity percentage
wind.speed	value	the reported current wind speed in Km/h
wind.speed	value	the reported current wind direction in degrees
forecast.day.<n> (<n> = 1 or 2)	value	the week day identified by <n> (i.e. “Mon”, “Tue”, “Wed”, ...)
forecast.temp.low.c.<n> (<n> = 1 or 2)	value	the forecasted lowest temperature for day <n> followed by "°C"
forecast.temp.low.c.<n>.nounit (<n> = 1 or 2)	value	the forecasted lowest temperature for day <n> without unit (expressed in °C)
forecast.temp.low.f.<n> (<n> = 1 or 2)	value	the forecasted lowest temperature for day <n> followed by "°F"
forecast.temp.low.f.<n>.nounit (<n> = 1 or 2)	value	the forecasted lowest temperature for day <n> without unit (expressed in °F)
forecast.temp.high.c.<n> (<n> = 1 or 2)	value	the forecasted highest temperature for day <n> followed by "°C"
forecast.temp.high.c.<n>.nounit (<n> = 1 or 2)	value	the forecasted highest temperature for day <n> without unit (expressed in °C)
forecast.temp.high.f.<n> (<n> = 1 or 2)	value	the forecasted highest temperature for day <n> followed by "°F"
forecast.temp.high.f.<n>.nounit (<n> = 1 or 2)	value	the forecasted highest temperature for day <n> without unit (expressed in °F)
forecast.condition.<n> (<n> = 1 or 2)	value	the forecasted weather condition for day <n> (e.g. “SUNNY”)
condition.label	img	weather/<current_condition_image>
forecast.condition.<n>.label (<n> = 1 or 2)	img	weather/<forecasted_condition_image>

Weather conditions images

The following table shows the mapping between each condition and the corresponding image.

To customize the images add a folder named "weather" inside the "img" folder of your project and add your images named accordingly to the table.

Condition	Image name	Default image
blowing_snow	snow.png
blustery	windy.png
clear_night	sunny.png
cloudy	cloudy.png
cold	icy.png
drizzle	drizzle.png
dust	dust.png
fair_day	partly_cloudy.png
fair_night	partly_cloudy.png
foggy	fog.png
freezing_drizzle	drizzle.png
freezing_rain	rain.png
hail	hail.png
haze	haze.png
heavy_snow	snow.png
hot	sunny.png
hurricane	storm.png
isolated_thundershowers	chance_of_storm.png
isolated_thunderstorms	chance_of_storm.png
light_snow_showers	snow.png
mixed_rain_hail	hail.png
mixed_rain_sleet	snow.png
mixed_rain_snow	snow.png
mixed_snow_sleet	snow.png
mostly_cloudy_day	cloudy.png
mostly_cloudy_night	cloudy.png
partly_cloudy	partly_cloudy.png
partly_cloudy_day	partly_cloudy.png
partly_cloudy_night	partly_cloudy.png
scattered_showers	chance_of_rain.png
scattered_snow_showers	chance_of_snow.png
scattered_thunderstorms	chance_of_storm.png
severe_thunderstorms	storm.png
showers	rain.png
sleet	snow.png
smoky	dust.png
snow	snow.png
snow_flurries	snow.png
snow_showers	snow.png
sunny	sunny.png
thundershowers	storm.png
thunderstorms	storm.png
tornado	tornado.png
tropical_storm	storm.png
windy	windy.png
unknown	unknown_weather_condition.png

Release Notes

3.5.1

• updated Yahoo API calls (new format required after March 15th, 2016)

3.4.0

• fixed Fahrenheit to Celsius conversion

3.1.1

• pressure datapoint added

3.1.0

• changed weather provider
• modified I/O Datapoints
• modified I/O Server options

3.0.1

• added weather object

3.0.0

• initial release

---

Yahoo! and Yahoo! Weather are registered trademarks of Yahoo! Inc.