Difference between revisions of "Protege"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
Select Little Endian format | Select Little Endian format | ||
Enable Login Block after PIN error | Enable Login Block after PIN error | ||
| + | |||
| + | [[Category:I/O Server]] | ||
| + | |||
| + | == HSYCO Configuration == | ||
| + | Add a PROTEGE I/O Server in the [[Settings#I/O Servers|I/O Servers section of the Settings]] and set its parameters: | ||
| + | |||
| + | === Communication === | ||
| + | *'''IP Address''': the Tecnoalarm panel address | ||
| + | *'''IP Port''': TCP/IP port enabled on the TECNO OUT. | ||
Revision as of 07:06, 14 August 2019
Protege is a server based architecture enabling you to securely manage, control and monitor a number of users, doors, areas, and other devices. The integration with HSYCO can be accomplished with a TCP/IP network connection.
ProtegeGXServer needs to be configured to accept a connection on a defined TCP/IP port with the ICT Automation and Control Service protocol. A PIN must be set (4 to 6 digits) Disable encryption and checksum Select Little Endian format Enable Login Block after PIN error
HSYCO Configuration
Add a PROTEGE I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- IP Address: the Tecnoalarm panel address
- IP Port: TCP/IP port enabled on the TECNO OUT.
