Difference between revisions of "Protege"
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
=== Communication === | === Communication === | ||
| − | *'''IP Address''': the | + | *'''IP Address''': the ICT Protege Server panel address |
| − | *'''IP Port''': TCP/IP port enabled on the | + | *'''IP Port''': TCP/IP port enabled on the ICT Protege Server |
| + | |||
| + | === High Availability === | ||
| + | *'''Shutdown when inactive''': defaults to true. | ||
Revision as of 07:08, 14 August 2019
Protege is a server based architecture enabling you to securely manage, control and monitor a number of users, doors, areas, and other devices. The integration with HSYCO can be accomplished with a TCP/IP network connection.
ProtegeGXServer needs to be configured to accept a connection on a defined TCP/IP port with the ICT Automation and Control Service protocol. A PIN must be set (4 to 6 digits) Disable encryption and checksum Select Little Endian format Enable Login Block after PIN error
HSYCO Configuration
Add a PROTEGE I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- IP Address: the ICT Protege Server panel address
- IP Port: TCP/IP port enabled on the ICT Protege Server
High Availability
- Shutdown when inactive: defaults to true.
