Protege

Protege is a server based architecture enabling you to securely manage, control and monitor a number of users, doors, areas, and other devices. The integration with HSYCO can be accomplished with a TCP/IP network connection.

• ProtegeGXServer needs to be configured to accept a connection on a defined TCP/IP port with the ICT Automation and Control Service protocol.
• A PIN must be set (4 to 6 digits)
• Disable encryption and checksum
• Select Little Endian format
• Enable Login Block after PIN error

HSYCO Configuration

Add a PROTEGE I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

• IP Address: the ICT Protege Server panel address
• IP Port: TCP/IP port enabled on the ICT Protege Server

High Availability

• Shutdown when inactive: defaults to true.

Options

ID	Default	Values	Description
pin		pin	the user PIN that the driver uses when sending commands to the Protege system. It must be a valid user code, able to engage and disengage the panel.
startupevents	false	true	generate IO events also during the driver’s start-up phase
		false	start generating events only after HSYCO is aligned with the current status of the system
gui	true	true	enable support of the tecnoalarm Web interface object
		false	disable support of the tecnoalarm Web interface object
debug	false	true	generates additional logs that can be viewed in verbose mode
		false	debug logging disabled
areaslist		string	list of all the areas that are declared on the panel. Areas could not be consecutive and special characters "-" and ";" are used for intervals definition. E.G. 0-3;5-9 means areas from 0 to 3, from 5 to 9. E.G. 4;15 means area number 4 and number 15
inputslist		string	list of all the inputs that are declared on the panel. Inputs could not be consecutive and special characters "-" and ";" are used for intervals definition. E.G. 0-3;5-9 means inputs from 0 to 3, from 5 to 9. E.G. 4;15 means input number 4 and input 15
outputslist		string	list of all the outputs that are declared on the panel. Outputs could not be consecutive and special characters "-" and ";" are used for intervals definition. E.G. 0-3;5-9 means outputs from 0 to 3, from 5 to 9. E.G. 4;15 means output number 4 and output 15
doorslist		string	list of all the doors that are declared on the panel. Doors could not be consecutive and special characters "-" and ";" are used for intervals definition. E.G. 0-3;5-9 means doors from 0 to 3, from 5 to 9. E.G. 4;15 means door number 4 and door 15
troubleinputslist		string	list of all the trouble inputs that are declared on the panel. Trouble inputs could not be consecutive and special characters "-" and ";" are used for intervals definition. E.G. 0-3;5-9 means trouble inputs from 0 to 3, from 5 to 9. E.G. 4;15 means trouble input number 4 and trouble input 15

Datapoints

ID	Value	R/W	Description
connection	online	R	connection established
	offline	R	connection failed
panel.firmware.build	<text>	R	firmware build of the panel
panel.firmware.type	<text>	R	firmware type of the panel
panel.firmware.version	<text>	R	firmware version of the panel
panel.hardware.version	<text>	R	hardware version of the panel
panel.serial.number	<text>	R	serial number of the panel
a<n>.armed	1	R	area is armed
	0	R	area is disarmed
a<n>.state	armed	R	area is armed
	disarmed	R	area is disarmed
	inputsopen	R	area is in inputs open state
	trouble	R	area is in trouble state
	bypasserror	R	area is in bypass error state
	bypasswarning	R	area is in bypass warning state
	usercountnotzero	R	area is in user count not zero state
	exitdelay	R	area is in exit delay state
	entrydelay	R	area is in entry delay state
	disarmdelay	R	area is in disarm delay state
	codedelay	R	area is in code delay state
a<n>.tamper.state	armed	R	area tamper is armed
	disarmed	R	area tamper is disarmed
	busy	R	area tamper is busy
a<n>.state.flags.alarm.activated	1	R	area alarm activated
	0	R	area alarm is not active
a<n>.state.flags.siren.activated	1	R	area siren activated
	0	R	area siren is not active
a<n>.state.flags.alarms.in.memory	1	R	at least one area alarm in memory
	0	R	no area alarms in memory
a<n>.state.flags.remote.armed	1	R	area remotely armed
	0	R	alarm is not remotely armed
a<n>.state.flags.force.armed	1	R	area forced armed
	0	R	alarm is not forced armed
a<n>.state.flags.instant.armed	1	R	area instant armed
	0	R	alarm is not instant armed
a<n>.state.flags.partial.armed	1	R	area partially armed
	0	R	alarm is not partially armed
o<n>.state	off	R	output in off
	on	R	output in on
	onpulsed	R	output is in on pulsed state
	ontimed	R	output is in on timed state
	onpulsedtimed	R	output is in on pulsed timed state
o<n>.ascii	<text>	R	output label in ascii format