Difference between revisions of "Detnov"
Jump to navigation
Jump to search
| Line 58: | Line 58: | ||
|pollingtime | |pollingtime | ||
|3000 | |3000 | ||
| − | |style="white-space:nowrap"|3000 | + | |style="white-space:nowrap"|n >= 3000 |
| − | | | + | |the data polling interval, in milliseconds. |
|- | |- | ||
|} | |} | ||
Revision as of 12:27, 21 December 2020
DETNOV are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation MODBUS REGISTERS FOR DETNOV ADDRESSABLE SYSTEM VERSION 1.11 ENG
This driver has been tested on DETNOV CAD-150-2 panel.
Communication
DETNOV panels can be connected via ethernet. A valid IP address must be assigned to the panel. MODBUS PROTOCOL must be enabled. Please refer to the manual for detailed instruction about MODBUS protocol configuration.
HSYCO Configuration
Add a DETNOV I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- Address: IP address of the DETNOV panel
- Port: TCP/IP port for MODBUS communication (default 502)
High Availability
- Shutdown when inactive: defaults to false.
Options
| ID | Default | Values | Description |
|---|---|---|---|
| gui | true | true | enable support for the UI object, UISET actions and USER commands |
| false | disable UI support | ||
| startupevents | false | true | generate IO events also during the driver’s start-up phase |
| false | start generating events only after HSYCO is aligned with the current status of the system | ||
| unitid | 1 | > 0 | MODBUS unit ID of the DETNOV panel |
| pollingtime | 3000 | n >= 3000 | the data polling interval, in milliseconds. |
