Esser

ESSER 8xxx/IQ8/FlexES are multi-area fire panels. The integration with HSYCO can be accomplished using IBOX Modbus Server - ESSER gateway, a TCP/IP modbus interface. This I/O server was developed following the MODBUS documentation ES-MN-18002-01-2, 11-2013.

Communication

ESSER panels can be connected via ethernet. A valid IP address must be assigned to the IBOX Modbus Server - ESSER gateway. Please refer to the manual for detailed instruction about IBOX configuration.

HSYCO Configuration

Add a ESSER I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

• Address: IP address of the ESSER IBOX
• Port: TCP/IP port for MODBUS communication (default 502)

High Availability

• Shutdown when inactive: defaults to false.

Options

ID	Default	Values	Description
gui	true	true	enable support for the UI object, UISET actions and USER commands
		false	disable UI support
startupevents	false	true	generate IO events also during the driver’s start-up phase
		false	start generating events only after HSYCO is aligned with the current status of the system
unitid	1	> 0	MODBUS unit ID of the ESSER panel
pollingtime	2000	n >= 1000	the data polling interval, in milliseconds.
csvseparator	semicolon	comma	use "," as separator for the I/O Server .csv configuration file
		semicolon	use ";" as separator for the I/O Server .csv configuration file

Esser CSV file

 It is mandatory to import a CSV file for each Esser I/O Server declared. These CSV files must be saved in the "esser" folder. The name syntax of each file must be the following: "<id of I/O server>.csv"

For example, if the id of the I/O Server is "esser1", the csv file must have have the name "esser1.csv"

This CSV file is an export of the IBOX Configuration Modbus Table. This file is required to provide to the I/O Server the list of all the modbus addresses that must be read.

This is an example of the file content: