Difference between revisions of "NETIO"

From HSYCO
Jump to navigation Jump to search
 
(47 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
This driver commands NETIO devices and reads status from them, it uses HTTP protocol with basic authentication.
+
This driver can read the status and send control commands to a NETIO power socket, using the HTTP JSON API protocol with basic authentication (username and password).
 +
 
 +
NETIO supported models are: PowerCable REST 101x, PowerPDU 4C, PowerPDU 4PS, PowerDIN 4PZ, PowerBOX 3Px, 4, 4All.
  
 
[[Category:I/O Server]]
 
[[Category:I/O Server]]
  
 
== Device Configuration ==
 
== Device Configuration ==
−
Firstly device must configured with it's web configuration page (see device manual instruction for this step). Remember to assign a static IP address to the device (remove the flag from DHCP option) as shown below:
+
The device should be configured with a static IP address, or a fixed DHCP assigned address.
 +
 
 +
On the device's configuration page go to section M2M API Protocol and configure JSON API protocol:
 +
 
 +
*'''Enable JSON API'''
 +
*'''Enable READ'''
 +
*'''Enable WRITE'''
 +
 
 +
[[File:NETIO_web_configuration.png|border|600px|center|Network configuration]]
  
 +
You should change the JSON API username and password.
  
 
== HSYCO Configuration ==
 
== HSYCO Configuration ==
Line 12: Line 23:
 
=== Communication ===
 
=== Communication ===
 
*'''IP Address''': local IP address of NETIO device
 
*'''IP Address''': local IP address of NETIO device
 +
*'''Port''': leave it blank
  
 
=== Authentication ===
 
=== Authentication ===
−
*'''User''': username, as set with NETIO web configuration page
+
*'''User''': JSON API username, as set with device web configuration page
−
*'''Password''': password, as set with NETIO web configuration page
+
*'''Password''': JSON API password, as set with device web configuration page
 +
 
 +
 
 +
 
 +
=== Options ===
 +
 
 +
{| class="wikitable"
 +
!ID
 +
!Default
 +
!Values
 +
!Description
 +
 
 +
|-
 +
 
 +
|rowspan="2"|startupevents
 +
|rowspan="2"|false
 +
|true
 +
|generate IO events also during the driver’s start-up phase
 +
|-
 +
|false
 +
|start generating events only after HSYCO is aligned with the current status of the system
 +
 
 +
|-
 +
 
 +
|pollinterval
 +
|1000
 +
|n >= 100
 +
|data acquisition interval, in milliseconds, from the power socket
 +
 
 +
|}
 +
 
 +
 
 +
 
 +
== Datapoints ==
 +
 
 +
{| class="wikitable"
 +
!ID
 +
!Value
 +
!R/W
 +
!Description
 +
 
 +
|-
 +
|rowspan="2" |connection
 +
|online
 +
|R
 +
|the power socket is online and the driver is receiving data from it
 +
|-
 +
|offline
 +
|R
 +
|initialization of the driver failed or loop cycle failed
 +
|-
 +
|rowspan="11" |o<n>
 +
|on
 +
|W
 +
|turn on output <n>
 +
|-
 +
|off
 +
|W
 +
|turn off output <n>
 +
|-
 +
|flip
 +
|W
 +
|power switch on output <n>
 +
|-
 +
|rowspan="2"|0
 +
|R
 +
|output <n> is off
 +
|-
 +
|W
 +
|turn off output <n>
 +
|-
 +
|rowspan="2"|1
 +
|R
 +
|output <n> is on
 +
|-
 +
|W
 +
|turn on output <n>
 +
|-
 +
|off&
 +
|W
 +
|turn off output <n> for a short time (short off)
 +
|-
 +
|off&<t>
 +
|W
 +
|turn off output <n> for <t> milliseconds
 +
|-
 +
|on&
 +
|W
 +
|turn on output <n> for a short time (short on)
 +
|-
 +
|on&<t>
 +
|W
 +
|turn on output <n> for  <t> milliseconds
 +
|-
 +
|model
 +
|<text>
 +
|R
 +
|device model
 +
|-
 +
|fwversion
 +
|<text>
 +
|R
 +
|firmware version
 +
|-
 +
|jsonversion
 +
|<text>
 +
|R
 +
|JSON protocol version
 +
|-
 +
|name
 +
|<text>
 +
|R
 +
|device name
 +
|-
 +
|macaddress
 +
|<text>
 +
|R
 +
|device MAC address
 +
|-
 +
|serialnum
 +
|<text>
 +
|R
 +
|device serial number
 +
|-
 +
|uptime
 +
|<val>
 +
|R
 +
|time, in minutes, since device startup
 +
|-
 +
|numoutputs
 +
|<n>
 +
|R
 +
|number of device outputs
 +
|-
 +
|numinputs
 +
|<n>
 +
|R
 +
|number of device inputs
 +
|-
 +
|voltage
 +
|<val>
 +
|R
 +
|instantaneous device voltage, in Volt
 +
|-
 +
|frequency
 +
|<val>
 +
|R
 +
|instantaneous device frequency, in Hertz
 +
|-
 +
|totcurrent
 +
|<val>
 +
|R
 +
|instantaneous total current through all power outputs, in milliampere
 +
|-
 +
|opf
 +
|<val>
 +
|R
 +
|instantaneous True Power Factor weighted average from all meters
 +
|-
 +
|phase
 +
|<val>
 +
|R
 +
|instantaneous phase weighted average from all meters
 +
|-
 +
|totload
 +
|<val>
 +
|R
 +
|total power of all power outputs, in Watt
 +
|-
 +
|totenergy
 +
|<val>
 +
|R
 +
|instantaneous value of the Total Energy counter (Wh)
 +
|-
 +
|o<n>.name
 +
|<text>
 +
|R
 +
|output <n> name, defined in web configuration page
 +
|-
 +
|o<n>.delay
 +
|<val>
 +
|R
 +
|output <n> delay for short On/Off, in milliseconds
 +
|-
 +
|o<n>.current
 +
|<val>
 +
|R
 +
|instantaneous current of output <n>, in milliampere
 +
|-
 +
|o<n>.pf
 +
|<val>
 +
|R
 +
|instantaneous True Power Factor of output <n>
 +
|-
 +
|o<n>.phase
 +
|<val>
 +
|R
 +
|instantaneous phase of output <n>
 +
|-
 +
|o<n>.load
 +
|<val>
 +
|R
 +
|total power of output <n>
 +
|-
 +
|o<n>.energy
 +
|<val>
 +
|R
 +
|instantaneous value of the energy counter of output <n> (Wh)
 +
|-
 +
|o<n>.rvenergy
 +
|<val>
 +
|R
 +
|instantaneous value of the reverse energy counter of output <n> (Wh)
 +
|-
 +
|rowspan="2"|i<n>
 +
|1
 +
|R
 +
|input <n> is on
 +
|-
 +
|0
 +
|R
 +
|input <n> is off
 +
|-
 +
|i<n>.name
 +
|<text>
 +
|R
 +
|input <n> name, defined in web configuration page
 +
|-
 +
|i<n>.s0counter
 +
|<val>
 +
|R
 +
|s0 counter value of input <n>
 +
 
 +
|}
 +
 
 +
== Release Notes ==
 +
=== 3.8.0 ===
 +
*initial release
 +
 
 +
----
 +
 
 +
 
 +
''NETIO is a registered trademark of NETIO Products a.s.''

Latest revision as of 12:36, 24 November 2020

This driver can read the status and send control commands to a NETIO power socket, using the HTTP JSON API protocol with basic authentication (username and password).

NETIO supported models are: PowerCable REST 101x, PowerPDU 4C, PowerPDU 4PS, PowerDIN 4PZ, PowerBOX 3Px, 4, 4All.

Device Configuration

The device should be configured with a static IP address, or a fixed DHCP assigned address.

On the device's configuration page go to section M2M API Protocol and configure JSON API protocol:

  • Enable JSON API
  • Enable READ
  • Enable WRITE
Network configuration

You should change the JSON API username and password.

HSYCO Configuration

Add the NETIO I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

  • IP Address: local IP address of NETIO device
  • Port: leave it blank

Authentication

  • User: JSON API username, as set with device web configuration page
  • Password: JSON API password, as set with device web configuration page


Options

ID Default Values Description
startupevents false true generate IO events also during the driver’s start-up phase
false start generating events only after HSYCO is aligned with the current status of the system
pollinterval 1000 n >= 100 data acquisition interval, in milliseconds, from the power socket


Datapoints

ID Value R/W Description
connection online R the power socket is online and the driver is receiving data from it
offline R initialization of the driver failed or loop cycle failed
o<n> on W turn on output <n>
off W turn off output <n>
flip W power switch on output <n>
0 R output <n> is off
W turn off output <n>
1 R output <n> is on
W turn on output <n>
off& W turn off output <n> for a short time (short off)
off&<t> W turn off output <n> for <t> milliseconds
on& W turn on output <n> for a short time (short on)
on&<t> W turn on output <n> for <t> milliseconds
model <text> R device model
fwversion <text> R firmware version
jsonversion <text> R JSON protocol version
name <text> R device name
macaddress <text> R device MAC address
serialnum <text> R device serial number
uptime <val> R time, in minutes, since device startup
numoutputs <n> R number of device outputs
numinputs <n> R number of device inputs
voltage <val> R instantaneous device voltage, in Volt
frequency <val> R instantaneous device frequency, in Hertz
totcurrent <val> R instantaneous total current through all power outputs, in milliampere
opf <val> R instantaneous True Power Factor weighted average from all meters
phase <val> R instantaneous phase weighted average from all meters
totload <val> R total power of all power outputs, in Watt
totenergy <val> R instantaneous value of the Total Energy counter (Wh)
o<n>.name <text> R output <n> name, defined in web configuration page
o<n>.delay <val> R output <n> delay for short On/Off, in milliseconds
o<n>.current <val> R instantaneous current of output <n>, in milliampere
o<n>.pf <val> R instantaneous True Power Factor of output <n>
o<n>.phase <val> R instantaneous phase of output <n>
o<n>.load <val> R total power of output <n>
o<n>.energy <val> R instantaneous value of the energy counter of output <n> (Wh)
o<n>.rvenergy <val> R instantaneous value of the reverse energy counter of output <n> (Wh)
i<n> 1 R input <n> is on
0 R input <n> is off
i<n>.name <text> R input <n> name, defined in web configuration page
i<n>.s0counter <val> R s0 counter value of input <n>

Release Notes

3.8.0

  • initial release


NETIO is a registered trademark of NETIO Products a.s.

Retrieved from "https://wiki.hsyco.com/3.8/index.php?title=NETIO&oldid=9483"