Difference between revisions of "ESC/VP"

From HSYCO
Jump to navigation Jump to search
 
(22 intermediate revisions by 3 users not shown)
Line 7: Line 7:
  
 
== Projector Configuration ==
 
== Projector Configuration ==
 +
 +
Use an Ethernet straight cable to connect the device to the HSYCO SERVER network.
  
 
In order to be able to control the device with HSYCO some initial configuration of the SEIKO EPSON device is needed.
 
In order to be able to control the device with HSYCO some initial configuration of the SEIKO EPSON device is needed.
Line 14: Line 16:
 
Further, in the “Extended” section, make sure the option “Standby mode” is set to “communication on”.
 
Further, in the “Extended” section, make sure the option “Standby mode” is set to “communication on”.
  
 +
== HSYCO Configuration ==
 +
Add an ESC/VP I/O Server in the [[Settings#I/O Servers|I/O Servers section of the Settings]] and set its parameters:
  
−
== HSYCO Configuration ==
+
=== Communication ===
 +
*'''IP Address''': IP address of the device
 +
*'''IP Port''': TCP/IP port to use, leave blank to use default port 3629.
 +
 
 +
=== High Availability ===
 +
*'''Shutdown when inactive''': defaults to true.
  
 
=== Options ===
 
=== Options ===
Line 41: Line 50:
 
|n > 0
 
|n > 0
 
|the data acquisition interval, in seconds
 
|the data acquisition interval, in seconds
 +
 +
|-
 +
 +
|rowspan="2"|serial
 +
|rowspan="2"|false
 +
|true
 +
|the projector is connected using its serial port
 +
|-
 +
|false
 +
|the projector is connected using its Ethernet port
  
 
|}
 
|}
Line 99: Line 118:
 
|the projector is in a standby error state
 
|the projector is in a standby error state
  
 +
|-
 +
 +
|lamp
 +
|0 ... 65535
 +
|R
 +
|the lamp hours
 +
 +
|-
 +
 +
|rowspan="6" |luminance
 +
|rowspan="2" |low
 +
|R
 +
|the luminance is set to low
 +
|-
 +
|W
 +
|set luminance to low
 +
|-
 +
|rowspan="2" |middle
 +
|R
 +
|the luminance is set to middle
 +
|-
 +
|W
 +
|set luminance to middle
 +
|-
 +
|rowspan="2" |high
 +
|R
 +
|the luminance is set to high
 +
|-
 +
|W
 +
|set luminance to high
 +
 +
|-
 +
 +
|rowspan="4" |mute
 +
|rowspan="2" |1
 +
|R
 +
|the A/V mute is on
 +
|-
 +
|W
 +
|set A/V mute to on
 +
|-
 +
|rowspan="2" |0
 +
|R
 +
|the A/V mute is off
 +
|-
 +
|W
 +
|set A/V mute to off
 +
 +
|-
 +
 +
|rowspan="6" |msel
 +
|rowspan="2" |black
 +
|R
 +
|the mute screen is set to black
 +
|-
 +
|W
 +
|set the mute screen to black
 +
|-
 +
|rowspan="2" |blue
 +
|R
 +
|the mute screen is set to blue
 +
|-
 +
|W
 +
|set the mute screen to blue
 +
|-
 +
|rowspan="2" |logo
 +
|R
 +
|the mute screen is set to show the user logo
 +
|-
 +
|W
 +
|set the mute screen to show the user logo
 +
 +
|-
 +
 +
|rowspan="2" |source
 +
|rowspan="2" |[[#sources|<src>]]
 +
|R
 +
|the current source is [[#sources|<src>]]
 +
|-
 +
|W
 +
|set the source to [[#sources|<src>]]
 +
 +
|-
 +
 +
|command
 +
|<cmd>
 +
|W
 +
|send <cmd> as command to the projector. The command must be compliant with the ESC/VP21 protocol
 +
|}
 +
 +
<span id="sources">
 +
;Source values: The source value <src> consists of a two-characters code which variates depending on the model of the projector. For instance, for the model G5000, the code “21” corresponds to the RGB input and the code “45” to the BNC video source. Refer to the ESC/VP21 Command User’s Guide for a complete list of source codes for the different models.
 +
</span>
 +
 +
== User Interface ==
 +
 +
=== UISET Actions ===
 +
 +
{| class="wikitable"
 +
!ID
 +
!Attribute
 +
!colspan="2"|Set to
 +
 +
|-
 +
 +
|rowspan="2"|connection
 +
|rowspan="2"|visible
 +
|true
 +
|when datapoint connection = offline
 +
|-
 +
|false
 +
|when datapoint connection = online
 +
 +
|-
 +
 +
|rowspan="2"|power
 +
|rowspan="2"|value
 +
|ON
 +
|when the projector is on and ready
 +
|-
 +
|OFF
 +
|when the projector is off or not ready
 +
 +
|-
 +
 +
|rowspan="3"|lamp
 +
|value
 +
|colspan="2"|number of hours of activity of the lamp.
 +
|-
 +
|rowspan="2"|visible
 +
|true
 +
|when the projector is on
 +
|-
 +
|false
 +
|when the projector is off
 +
 +
|-
 +
 +
|rowspan="5"|luminance
 +
|rowspan="3"|value
 +
|HIGH
 +
|when the luminance is set to high
 +
|-
 +
|MIDDLE
 +
|when the luminance is set to middle
 +
|-
 +
|LOW
 +
|when the luminance is set to low
 +
|-
 +
|rowspan="2"|visible
 +
|true
 +
|when the projector is on
 +
|-
 +
|false
 +
|when the projector is off
 +
 +
|-
 +
 +
|rowspan="2"|mute
 +
|rowspan="2"|value
 +
|ON
 +
|when the A/V mute function is on
 +
|-
 +
|OFF
 +
|when the A/V mute function is off
 +
 +
|-
 +
 +
|rowspan="3"|msel
 +
|rowspan="3"|value
 +
|BLACK
 +
|when the mute screen is set to black
 +
|-
 +
|BLUE
 +
|when the mute screen is set to blue
 +
|-
 +
|LOGO
 +
|when the mute screen is set to show the user logo
 
|}
 
|}
 +
 +
=== USER Commands ===
 +
 +
{| class="wikitable"
 +
!Name
 +
!Param
 +
!Action
 +
 +
|-
 +
 +
|rowspan="2" |power
 +
|on
 +
|turn on the projector
 +
|-
 +
|off
 +
|turn off the projector
 +
 +
|-
 +
 +
|rowspan="3" |luminance
 +
|low
 +
|set the luminance to low
 +
|-
 +
|middle
 +
|set the luminance to middle
 +
|-
 +
|high
 +
|set the luminance to high
 +
 +
|-
 +
 +
|rowspan="2" |mute
 +
|on
 +
|turn on the A/V mute
 +
|-
 +
|off
 +
|turn off the A/V mute
 +
 +
|-
 +
 +
|source
 +
|[[#sources|<src>]]
 +
|set the source to [[#sources|<src>]]
 +
 +
|-
 +
 +
|rowspan="3" |msel
 +
|black
 +
|set the A/V mute screen to black
 +
|-
 +
|blue
 +
|set the A/V mute screen to blue
 +
|-
 +
|logo
 +
|set the A/V mute screen to show the user logo
 +
 +
|}
 +
 +
== Release Notes ==
 +
 +
=== 3.7.0 ===
 +
*improved protocol compatibility
 +
*added support for "middle" luminance level
 +
 +
=== 3.5.0 ===
 +
*improved communication reliability
 +
 +
=== 3.4.0 ===
 +
*added "serial" option
 +
 +
=== 3.2.0 ===
 +
*minor fixes to the I/O Server
 +
 +
=== 1.0.0 ===
 +
*initial release
 +
 +
----
 +
 +
 +
''SEIKO EPSON is a registered trademark of SEIKO EPSON Corporation.''

Latest revision as of 10:00, 18 September 2019

This I/O Server control SEIKO EPSON projectors which include a wide range of multi-source projectors remotely controllable via Ethernet, serial port, and USB connection. HSYCO SERVER integrates these devices through Ethernet connection.

The used protocol is compliant with the ESC/VP21 protocol specifications.

Projector Configuration

Use an Ethernet straight cable to connect the device to the HSYCO SERVER network.

In order to be able to control the device with HSYCO some initial configuration of the SEIKO EPSON device is needed.

In the “Network” section of the main menu, assign a suitable fixed IP address to the device and set the DHCP option to off.

Further, in the “Extended” section, make sure the option “Standby mode” is set to “communication on”.

HSYCO Configuration

Add an ESC/VP I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

  • IP Address: IP address of the device
  • IP Port: TCP/IP port to use, leave blank to use default port 3629.

High Availability

  • Shutdown when inactive: defaults to true.

Options

ID Default Values Description
gui true true enable support for UISET actions and USER commands
false disable UI support
pollinterval 3 n > 0 the data acquisition interval, in seconds
serial false true the projector is connected using its serial port
false the projector is connected using its Ethernet port

Datapoints

ID Value R/W Description
connection online R connection established
offline R HSYCO can't connect to the device
power 1 R the projector is on and ready
W turn on the projector
0 R the projector is off or not ready
W turn off the projector
status on R the projector is on and ready
off the projector is off
warming the projector is warming up
cooling the projector is cooling down
error the projector is in a standby error state
lamp 0 ... 65535 R the lamp hours
luminance low R the luminance is set to low
W set luminance to low
middle R the luminance is set to middle
W set luminance to middle
high R the luminance is set to high
W set luminance to high
mute 1 R the A/V mute is on
W set A/V mute to on
0 R the A/V mute is off
W set A/V mute to off
msel black R the mute screen is set to black
W set the mute screen to black
blue R the mute screen is set to blue
W set the mute screen to blue
logo R the mute screen is set to show the user logo
W set the mute screen to show the user logo
source <src> R the current source is <src>
W set the source to <src>
command <cmd> W send <cmd> as command to the projector. The command must be compliant with the ESC/VP21 protocol

Source values
The source value <src> consists of a two-characters code which variates depending on the model of the projector. For instance, for the model G5000, the code “21” corresponds to the RGB input and the code “45” to the BNC video source. Refer to the ESC/VP21 Command User’s Guide for a complete list of source codes for the different models.

User Interface

UISET Actions

ID Attribute Set to
connection visible true when datapoint connection = offline
false when datapoint connection = online
power value ON when the projector is on and ready
OFF when the projector is off or not ready
lamp value number of hours of activity of the lamp.
visible true when the projector is on
false when the projector is off
luminance value HIGH when the luminance is set to high
MIDDLE when the luminance is set to middle
LOW when the luminance is set to low
visible true when the projector is on
false when the projector is off
mute value ON when the A/V mute function is on
OFF when the A/V mute function is off
msel value BLACK when the mute screen is set to black
BLUE when the mute screen is set to blue
LOGO when the mute screen is set to show the user logo

USER Commands

Name Param Action
power on turn on the projector
off turn off the projector
luminance low set the luminance to low
middle set the luminance to middle
high set the luminance to high
mute on turn on the A/V mute
off turn off the A/V mute
source <src> set the source to <src>
msel black set the A/V mute screen to black
blue set the A/V mute screen to blue
logo set the A/V mute screen to show the user logo

Release Notes

3.7.0

  • improved protocol compatibility
  • added support for "middle" luminance level

3.5.0

  • improved communication reliability

3.4.0

  • added "serial" option

3.2.0

  • minor fixes to the I/O Server

1.0.0

  • initial release


SEIKO EPSON is a registered trademark of SEIKO EPSON Corporation.

Retrieved from "https://wiki.hsyco.com/3.8/index.php?title=ESC/VP&oldid=8247"