Difference between revisions of "Kilsen"
Jump to navigation
Jump to search
| Line 114: | Line 114: | ||
|- | |- | ||
| − | |sounders.set | + | |rowspan="2" |sounders.set |
| − | |0 | + | |0 |
|W | |W | ||
| − | | | + | |stop sounders |
|- | |- | ||
| + | |1 | ||
| + | |W | ||
| + | |start sounders | ||
| + | |- | ||
| + | |||
| + | |||
| + | |rowspan="2" |global.alarm | ||
| + | |0 | ||
| + | |R | ||
| + | |at lest one sensor of module on alarm | ||
| + | |- | ||
| + | |1 | ||
| + | |R | ||
| + | |no alarm | ||
| + | |- | ||
| + | |||
| + | |rowspan="2" |global.fault | ||
| + | |0 | ||
| + | |R | ||
| + | |at lest one sensor of module on fault status | ||
| + | |- | ||
| + | |1 | ||
| + | |R | ||
| + | |no faults | ||
| + | |- | ||
| + | |||
| + | |rowspan="2" |global.disable | ||
| + | |0 | ||
| + | |R | ||
| + | |at lest one sensor of module is disabled | ||
| + | |- | ||
| + | |1 | ||
| + | |R | ||
| + | |no sensors or modules disabled | ||
| + | |- | ||
| + | |||
| + | |rowspan="2" |global.test | ||
| + | |0 | ||
| + | |R | ||
| + | |panel in test mode | ||
| + | |- | ||
| + | |1 | ||
| + | |R | ||
| + | |panel is not in test mode | ||
| + | |- | ||
| + | |||
| + | |rowspan="2" |global.daynight | ||
| + | |0 | ||
| + | |R | ||
| + | |panel in night mode | ||
| + | |- | ||
| + | |1 | ||
| + | |R | ||
| + | |panel is day mode | ||
| + | |- | ||
| + | |||
|} | |} | ||
Revision as of 09:32, 19 April 2019
KILSEN KFP-A are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation P/N 00-3243-505-1603-01 • ISS 14DEC15
Contents
Communication
KILSEN panels can be connected via ethernet. A valid IP address must be assigned to the panel. MODBUS PROTOCOL must be enabled. Please refer to the manual for detailed instruction about MODBUS protocol configuration.
HSYCO Configuration
Add a KILSEN I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- Address: IP address of the KILSEN panel
- Port: TCP/IP port for MODBUS communication (default 502)
High Availability
- Shutdown when inactive: defaults to false.
Options
| ID | Default | Values | Description |
|---|---|---|---|
| gui | true | true | enable support for the UI object, UISET actions and USER commands |
| false | disable UI support | ||
| startupevents | false | true | generate IO events also during the driver’s start-up phase |
| false | start generating events only after HSYCO is aligned with the current status of the system | ||
| unitid | 1 | > 0 | MODBUS unit ID of the KILSEN panel |
| nodes | 1 | nodes list. Multiple nodes should be separated by semicolons | |
| loopsnumber | 1 | > 0 | total number of loops |
| sensorsnsumber | 1 | 0 ... 128 | set to the highest sensor number configured in the panel |
| modulesnumber | 1 | 0 ... 128 | set to the highest module number configured in the panel |
Datapoints
| ID | Value | R/W | Description |
|---|---|---|---|
| connection | online | R | connection established |
| offline | R | HSYCO can't connect to the panel | |
| reset | 1 | W | panel reset |
| panel.silence | 1 | W | silence panel |
| sounders.set | 0 | W | stop sounders |
| 1 | W | start sounders | |
| global.alarm | 0 | R | at lest one sensor of module on alarm |
| 1 | R | no alarm | |
| global.fault | 0 | R | at lest one sensor of module on fault status |
| 1 | R | no faults | |
| global.disable | 0 | R | at lest one sensor of module is disabled |
| 1 | R | no sensors or modules disabled | |
| global.test | 0 | R | panel in test mode |
| 1 | R | panel is not in test mode | |
| global.daynight | 0 | R | panel in night mode |
| 1 | R | panel is day mode |
