Difference between revisions of "MQTTBROKER"
Jump to navigation
Jump to search
Line 109: | Line 109: | ||
On publish messages you can specify: | On publish messages you can specify: | ||
*'''topic name''' | *'''topic name''' | ||
− | *'''message | + | *'''message''' |
*'''QoS required for the message''' | *'''QoS required for the message''' | ||
Other fields will be ignored | Other fields will be ignored | ||
==== Disconnect ==== | ==== Disconnect ==== |
Revision as of 09:41, 24 July 2019
This driver acts as an MQTT broker for Hsyco. It can connect with many clients but can only receive messages without forwarding them.
Contents
HSYCO Configuration
Add the MQTTBROKER I/O Server in the I/O Servers section of the Settings and set its parameters:
Authentication
- Username: optional default username for clients
- Password: optional default password for clients
Authentication file
Under the hsyco root directory must be present a file named "mqttbroker.ini" which can contain a series of line, each line represents the credentials of a client and must have the following format:
"clientid":username="username",password="password"
Options
ID | Default | Values | Description |
---|---|---|---|
startupevents | true | true | generate IO events also during the driver’s start-up phase |
false | start generating events only after HSYCO is aligned with the current status of the system | ||
acceptunknown | false | true | accept connection from clients whose id isn't specified in mqttbrokerauth.ini |
false | doesn't accept connection from clients whose id isn't specified in mqttbrokerauth.ini | ||
localport | 1883 | <portNumber> | local port for incoming client connection |
Datapoints
ID | Value | R/W | Description |
---|---|---|---|
connection | online | R | the broker accepted a connection from a client |
offline | R | initialization of the driver failed or loop cycle failed | |
client.<clientId>.connected | 1 | R | clientId is connected to the broker |
0 | R | clientId isn't connected to the broker | |
client.<clientId>.topic.<topicName> | <message> | R | clientId published a message on topicName |
TYPES OF MESSAGE
Each message must be encoded as UTF-8 strings
Connection
On connection message you can specify:
- client identifier
- username
- password
- keep-alive interval
Other fields will be ignored
Publish
On publish messages you can specify:
- topic name
- message
- QoS required for the message
Other fields will be ignored