Difference between revisions of "TLABQ"
Jump to navigation
Jump to search
| Line 105: | Line 105: | ||
|fw | |fw | ||
| − | |< | + | |<val> |
|R | |R | ||
|firmware version running on the security panel | |firmware version running on the security panel | ||
| Line 130: | Line 130: | ||
|R | |R | ||
|HSYCO can't connect to the panel | |HSYCO can't connect to the panel | ||
| + | |||
| + | |- | ||
| + | |||
| + | |temp | ||
| + | |<val> | ||
| + | |R | ||
| + | |security panel temperature (C°) | ||
| + | |||
| + | |- | ||
| + | |||
| + | |credit | ||
| + | |<val> | ||
| + | |R | ||
| + | |SIM credit (€) | ||
| + | |||
| + | |- | ||
| + | |||
| + | |rowspan="2" |gsm.fault | ||
| + | |1 | ||
| + | |R | ||
| + | |gsm error | ||
| + | |- | ||
| + | |0 | ||
| + | |R | ||
| + | |no gsm error | ||
| + | |||
| + | |- | ||
| + | |||
| + | |rowspan="6" |gsm.fault.cause | ||
| + | |1 | ||
| + | |R | ||
| + | |network registration error | ||
| + | |- | ||
| + | |2 | ||
| + | |R | ||
| + | |no SIM | ||
| + | |- | ||
| + | |3 | ||
| + | |R | ||
| + | |no service provider | ||
| + | |- | ||
| + | |4 | ||
| + | |R | ||
| + | |low signal | ||
| + | |- | ||
| + | |5 | ||
| + | |R | ||
| + | |no response to sent command | ||
| + | |- | ||
| + | |6 | ||
| + | |R | ||
| + | |SIM pin block | ||
| + | |||
| + | |- | ||
| + | |||
| + | |rowspan="2" |pstn.fault | ||
| + | |1 | ||
| + | |R | ||
| + | |PSTN fault | ||
| + | |- | ||
| + | |0 | ||
| + | |R | ||
| + | |no PSTN fault | ||
|} | |} | ||
Revision as of 17:55, 1 March 2021
The TLAB-Q is a multi-area security system
Contents
HSYCO Configuration
Add the TLABQ I/O Server in the I/O Servers section of the Settings and set its parameters:
Communication
- IP Address: host name or IP address of the panel
- IP Port: TCP/IP port assigned to the panel's web server
Authentication
- User: username to access the web server
- Password: password to access the web server
Options
| ID | Default | Values | Description |
|---|---|---|---|
| startupevents | false | true | generate IO events also during the driver’s start-up phase |
| false | start generating events only after HSYCO is aligned with the current status of the system | ||
| gui | true | true | enable the UISET "visible" field for all system zones |
| false | disable the UISET "visible" field for all system zones | ||
| pollinterval | 1000 | n > 1000 | the data acquisition interval, in milliseconds |
| logsize | 400 | n ≥ 0 | the number of log lines to display in the UI object |
Datapoints
| ID | Value | R/W | Description |
|---|---|---|---|
| connection | online | R | connection established |
| offline | R | HSYCO can't connect to the panel | |
| id | Q | R | security panel series identification |
| model | Quadrio | R | connection established |
| Small | R | HSYCO can't connect to the panel | |
| Medium | R | connection established | |
| Large | R | HSYCO can't connect to the panel | |
| fw | <val> | R | firmware version running on the security panel |
| dataconfig | 0..999 | R | data configuration version |
| accesstype | admin | R | connection established |
| no_valid_access | R | HSYCO can't connect to the panel | |
| <user_index> | R | HSYCO can't connect to the panel | |
| temp | <val> | R | security panel temperature (C°) |
| credit | <val> | R | SIM credit (€) |
| gsm.fault | 1 | R | gsm error |
| 0 | R | no gsm error | |
| gsm.fault.cause | 1 | R | network registration error |
| 2 | R | no SIM | |
| 3 | R | no service provider | |
| 4 | R | low signal | |
| 5 | R | no response to sent command | |
| 6 | R | SIM pin block | |
| pstn.fault | 1 | R | PSTN fault |
| 0 | R | no PSTN fault |
User Interface
UISET Actions
| ID | Attribute | Set to | |
|---|---|---|---|
| log | value | latest security log lines (as many as specified by the 'logsize' option) | |
| connection.online | visible | true | when datapoint connection = online |
| false | when datapoint connection = offline | ||
| connection.offline | visible | true | when datapoint connection = offline |
| false | when datapoint connection = online | ||
| <datapoint_id>.1 | visible | true | when datapoint with ID <datapoint_id> has value '1' |
| false | when datapoint with ID <datapoint_id> has value '0' | ||
| <datapoint_id>.0 | visible | true | when datapoint with ID <datapoint_id> has value '0' |
| false | when datapoint with ID <datapoint_id> has value '1' | ||
USER Commands
| Name | Param | Action |
|---|---|---|
| p<n>.armed | 0 | disarm partition <n> |
| 1 | arm partition <n> | |
| p<n>.armed.part | 1 | part arm partition <n> |
| p<n>.reset | 1 | reset partition <n> |
| o<n> | 0 | set PC controlled output <n> off |
| 1 | set PC controlled output <n> on | |
| ox<n> | 0 | set X-10 controlled output <n> off |
| 1 | set X-10 controlled output <n> on | |
| key | <code> | send keypad key (see above for codes) |
Release Notes
3.8.0
- initial release
