Difference between revisions of "Netatmo"

IP Address: local IP address of NETIO device
Port: leave it blank

Revision as of 15:40, 8 September 2021

This driver can read status and control Netatmo smart radiator valves using HTTPS protocol.

Add the NETIO I/O Server in the I/O Servers section of the Settings and set its parameters:

ID	Default	Values	Description
startupevents	false	true	generate IO events also during the driver’s start-up phase
startupevents	false	false	start generating events only after HSYCO is aligned with the current status of the system
pollinterval	1000	n >= 100	data acquisition interval, in milliseconds, from the power socket

@@ Line 1: / Line 1: @@
-Ciao
+This driver can read status and control Netatmo smart radiator valves using HTTPS protocol.
+[[Category:I/O Server]]
+== HSYCO Configuration ==
+Add the NETIO I/O Server in the [[Settings#I/O Servers|I/O Servers section of the Settings]] and set its parameters:
+=== Communication ===
+*'''IP Address''': local IP address of NETIO device
+*'''Port''': leave it blank
+=== Authentication ===
+*'''User''': JSON API username, as set with device web configuration page
+*'''Password''': JSON API password, as set with device web configuration page
+=== Options ===
+{| class="wikitable"
+!ID
+!Default
+!Values
+!Description
+|-
+|rowspan="2"|startupevents
+|rowspan="2"|false
+|true
+|generate IO events also during the driver’s start-up phase
+|-
+|false
+|start generating events only after HSYCO is aligned with the current status of the system
+|-
+|pollinterval
+|1000
+|n >= 100
+|data acquisition interval, in milliseconds, from the power socket
+|}