Difference between revisions of "CSx75"
Jump to navigation
Jump to search
| Line 84: | Line 84: | ||
The csx75.ini file is a specific configuration file located in the root directory. | The csx75.ini file is a specific configuration file located in the root directory. | ||
| − | Here you can define the names of the | + | Here you can define the names of the users so that they will be automatically added to the user interface. Add a new line for each user using this format: |
<pre> | <pre> | ||
| − | <io_server_id>. | + | <io_server_id>.user.<n> = <name> |
</pre> | </pre> | ||
| Line 93: | Line 93: | ||
<pre> | <pre> | ||
| − | + | cs.user.1 = Bob | |
| − | + | cs.user.2 = Alice | |
| − | |||
</pre> | </pre> | ||
Revision as of 16:19, 23 December 2013
Aritech CSx75 is a multi-area security system. The integration with HSYCO can be accomplished via direct control through the RS-232 port on its panel.
Communication
Use the Aritech CS590 RS232 cable to connect the panel directly to HSYCO or to an Ethernet/RS-232 gateway.
RS-232 parameters:
| Baud rate | same as configured on panel (default 9600) |
| Data bits | 8 |
| Stop bit | 1 |
| Parity | none |
| Flow control | none |
CSx75 Configuration
The panel must be previously configured to have the serial port enabled and to use the binary control protocol. Refer to its configuration manual for more details.
HSYCO Configuration
Options
| ID | Default | Values | Description |
|---|---|---|---|
| pin | <code> | 4 or 6-digits code. Use the specified PIN code to perform operations that require user authentication. If this option is not specified it will be required to manually insert the pin every time such operations are performed | |
| gui | true | true | enable support for the UI object, UISET actions and USER commands |
| false | disable UI support | ||
| startupevents | false | true | generate IO events also during the driver’s start-up phase |
| false | start generating events only after HSYCO is aligned with the current status of the system | ||
| pollinterval | 3 | n > 0 | the data acquisition interval, in seconds |
| logsize | 20 | n ≥ 0 | the number of log lines to display in the UI object |
csx75.ini
The csx75.ini file is a specific configuration file located in the root directory. Here you can define the names of the users so that they will be automatically added to the user interface. Add a new line for each user using this format:
<io_server_id>.user.<n> = <name>
For instance:
cs.user.1 = Bob cs.user.2 = Alice
