Mews
Avigilon Control Center (ACC) 7 is a video management software that can be integrated in HSYCO with a TCP/IP connection. The current release of the I/O Server has been tested with the Avigilon Control Center WebEndpoint
This driver supports only a single connection with an Avigilon Control Server. If you have multiple Avigilon Control Servers it is mandatory to add more I/O servers to HSYCO, one for each Avigilon Control Server. Every I/O server must use a different IP address and TCP/IP port.
Options
- username: Username of the AVIGILON ACC 7 client.
- password: Password of the AVIGILON ACC 7 client.
- userkey: User api key Avigilon developer page.
- usernonce: User api nonce Avigilon developer page.
- pollingtime: Time in milliseconds that hsyco will wait before the next alarm check, leave blank or set it o 0 to use default polling time 300
- usessl: Tells the driver if the webendpoint uses SSL or not, leave blank for true
Datapoints
| ID | Value | R/W | Description |
|---|---|---|---|
| connection | online | R | HSYCO connection socket is open |
| offline | R | HSYCO cannot create the connection socket | |
| <alarmName>.alarm | 0 | R | The alarm is off |
| 1 | R | The alarm is on | |
| <alarmName>.state | active, autoacknowledged, acknowledged | R | get an alarm state |
States
| Value | Description |
|---|---|
| active | This state indicates that the motion detection actually detected some movement |
| acknowledged | This state indicates that the camera operator acknowledged the alarm |
| autoacknowledged | This state indicates that motion detection has stopped detecting the movement |
Example
In this example HSYCO is using the following format to turn on a light when the alarm goes off:
io avigilonapi.newalarm.alarm = 1 : io dummy.light.1 = 1
Where "avigilonapi" is the name of the driver given in HSYCO and "newalarm" is the name of the alarm given in ACC
Release Notes
3.8.0
- initial release
AVIGILON is a registered trademark of Avigilon Corporation
