Tecnoalarm

From HSYCO
Revision as of 15:34, 16 December 2013 by Hsyco (talk | contribs)
Jump to navigation Jump to search

Options

ID Default Values Description
gui true true enable automatic support of Web GUI objects to show the system status and intercept control buttons
false disable support for the Web GUI
startupevents false true generate IO events also during the driver’s start-up phase
false start generating events only after HSYCO is aligned with the current status of the system
discovery true true automatically creates the list of all detected datapoints with type DPT 1 and the defined virtual datapoints in the systemtopo.txt file
false auto-detect for devices is disabled
fromevents false true generates events for commands sent on the KNX BUS reporting the source address and the value of the command
false disable command events
readaftercommand false true forces the driver to read the value of a datapoint after a command is sent to it
false the driver will assume that commands detected on the BUS are always successful, thus no re-reading is performed to set the value of a datapoint
localport <port_number> specifies the port used locally by HSYCO to communicate with the KNXnet/IP gateway. This option might be necessary when employing network address translation (NAT)