NETIO

This driver commands NETIO devices and reads status from them, it uses HTTP protocol with basic authentication.

Device Configuration

Firstly device must configured with it's web configuration page (see device manual instruction for this step). Remember to assign a static IP address to the device (remove the flag from DHCP option) as shown below:

Network configuration

HSYCO Configuration

Add the NETIO I/O Server in the I/O Servers section of the Settings and set its parameters:

Communication

• IP Address: local IP address of NETIO device

Authentication

• User: username, as set with NETIO web configuration page
• Password: password, as set with NETIO web configuration page