Siemens Vanderbilt Edp

From HSYCO
Revision as of 08:37, 5 July 2022 by Enrico (talk | contribs)
Jump to navigation Jump to search

Siemens / Vanderbilt is a family of security panels compatible with the control protocol EDP. This driver has been developed following the EDP protocol specification rev 2.2, 2012-11-12 The integration with HSYCO can be accomplished with a TCP/IP network connection.

Siemens / Vanderbilt Configuration

Login in the panel web configuration page using a Engineer account.

You should see something like this in the upper right corner of the web page:

Vanderbilt01.png

Select "Configuration" then "Reporting" then "EDP". You must configure 2 different receivers, one for the command session, one for the event session.

Vanderbilt02.png

Let's take a look in detail at the configuration of these receivers. The events receiver is configured as "Primary receiver".

Vanderbilt03.png

Unflag "Primary receiver" for the command receiver. The "Ip port" parameter must be different from the one of the event receiver.

Vanderbilt04.png

Flag "Always connected" on both the receivers.

Retrieved from "https://wiki.hsyco.com/3.8/index.php?title=Siemens_Vanderbilt_Edp&oldid=10576"