Sonos
Sonos is...
Contents
Communication
Just make sure the Sonos device is connected to the same local network as HSYCO server is.
HSYCO Configuration
Add a SONOS I/O Server in the I/O Servers section of the Settings and set its parameters:
High Availability
- Shutdown when inactive: defaults to false.
Options
| ID | Default | Values | Description |
|---|---|---|---|
| startupevents | false | true | generate IO events also during the driver’s start-up phase |
| false | start generating events only after HSYCO is aligned with the current status of the system | ||
| room | <room_name> | If specified, the driver will connect to the device with the corresponding room name. If not specified this driver will look for and connect to any Sonos device on the local network |
Datapoints
| ID | Value | R/W | Description |
|---|---|---|---|
| connection | online | R | connection established |
| offline | R | HSYCO can't connect to the device | |
| state | playing | R | the audio is playing |
| paused_playback | R | the audio is paused | |
| transitioning | R | the device is transitioning between audio streams | |
| stopped | R | the audio is stopped | |
| unknown | R | the current state is unknown | |
| track.number | <n> | R | the current track is the number <n> in the current queue (can be "unknown") |
| track.title | <title> | R | title of the current track (can be "unknown") |
| track.creator | <name> | R | name of the author of the current track (can be "unknown") |
| track.album | <name> | R | name of the album of the current track (can be "unknown") |
| track.albumarturi | <uri> | R | uri of the album art of the current track (can be "unknown") |
| mute | 1 | R | the audio is muted |
| W | mute the audio | ||
| 0 | R | the audio is not muted | |
| W | unmute the audio | ||
| volume | 0 ... 100 | R | the volume is set to the reported value |
| W | set the volume to the specified value | ||
| +<n> | W | increase the volume of the specified value | |
| -<n> | W | decrease the volume of the specified value | |
| play | W | start playing | |
| <uri> | W | play the audio file located at the specified URI | |
| pause | W | pause the audio | |
| stop | W | stop the current queue | |
| next | W | go to the next queued track | |
| previous | W | go to the previous queued track | |
| queue | <n>:<uri> | W | add to the current queue, in <n>-th position, the audio file located at the specified URI (set <n> to 0 to add it at the end of the queue) |
User Interface
UISET Actions
USER Commands
Release Notes
3.5.0
- initial release
Sonos is a registered trademarks of Sonos, Inc
